Domar Zxtech Tropox User manual

Zxtech IP Camera
How To Setup
Tropox Camera
domar.com

Questions? Visit our website: domar.com or contact us at [e-mail]
2
Contents
PHYSICAL CAMERA............................................................................................................................................. 3
INSTALLING CAMERA SOFTWARE ...................................................................................................................... 4
Search Tool ....................................................................................................................................................... 6
CAMERA CONFIGURATION ................................................................................................................................ 11

Questions? Visit our website: domar.com or contact us at [e-mail]
3
PHYSICAL CAMERA

Questions? Visit our website: domar.com or contact us at [e-mail]
4
INSTALLING CAMERA SOFTWARE
1. First insert the CD that is found with the camera into the computer. Find the “PC Search
Tool” and install it.
2. The following window pop up; click next until the installation is complete. You can select
“Browse...” should you wish to change the installation location.

Questions? Visit our website: domar.com or contact us at [e-mail]
5
3. From the start menu you can find the tool. You can type in “search tool” if you cannot
find it from the programs list.

Questions? Visit our website: domar.com or contact us at [e-mail]
6
Search Tool
1. Click the Search tool software; once opened, click the “Next” button.

Questions? Visit our website: domar.com or contact us at [e-mail]
7
2. The following window shall come next. This will display the IP addresses of all the
cameras that are connected on the network. Should the camera not appear, please
double check physical connections.
3. Select the camera that you wish to configure first, as seen under A; the “Next” icon shall
then become clickable/selectable (Refer to B.)

Questions? Visit our website: domar.com or contact us at [e-mail]
8
4. You can select the “Refresh” button to find any newly connected camera. Refer to C.
5. The following window shall come after you select “Next”. Please make note of the IP
Address. (Refer to D.) Then you will need to click “Next”.

Questions? Visit our website: domar.com or contact us at [e-mail]
9
6. Wait for the process to finish.
7. Once the process is complete, the following window will come next; Click “Finish”.
ACCESSING THE CAMERA

Questions? Visit our website: domar.com or contact us at [e-mail]
10
For the next steps you will need the IP address. (Refer to step 5.)
1. You can use google chrome for this process.; type the IP address into the
search bar of the web browser. (Refer to A.)
Once you search for the IP address the following window will appear; refer to B.