DOMOS DOM-TI-0 User manual

QUICK START GUIDE
WIFI SMART THERMOSTAT
DOM-TI-0

PRODUCT PROFILE
Smart multi-function thermostat (short for
thermostat) is embedded with high-performance WIFI
module. It supports remote intelligent operation such
as temperature adjustment and timer setting. The
thermostat uses leading temperature control and
sensing technology, which combines highly reliable
cloud data model to achieve energy-efficient and
comfort. The product applies to gas boiler heating
system and central air-conditioning fan coil system.
Through comparing the indoor temperature and
pre-set temperature, it may open or close the fan coil on
the terminal of air conditioning system and the electric
valve, and then brings comfort and saves energy.
Safety Hint:
Input power
220V AC,
please do not
overload!
Date
Mode Wind
speed
time
Reset Up Down
Child-Lock
Humidity

Installation & Power Connection
The thermostat should be installed in the
standard 86 case, please ask professional to install
it correctly according to wire diagram in the back of
product.
Safety Notes: Please shut off all the power
before installing, then switch on
the power after completing.
Installation Diagram
837010002300

Configuration step in APP
1. APP download
Please scan the below QR code and download the
APP with your mobile. You may also input the linkage
in the mobile browser and download the APP.
Android iOS
Note: It needs specific authority when
you install APP, please do not forbid it.

Configuration step in APP
2. One-key configuration
Connect the WIFI by mobile, open the APP, click “
Search Device”.
You may also click “ +”button on the top right
corner and add “new device”.

Input the WIFI password of your router at
home, click “start search”. If connection failed,
please reset. Please see enclosed “thermostat
panel operation instruction” for the reset step.
* The product with software will be upgraded continuously. The
data, device picture and software interface listed in the file is
only used for instruction. We will not make further notice
when changes happen.

You can name your smart thermostat and
reset the password, then click “confirm”.

The function of APP
1. Control Panel 2. Smart Mode
1 2
Status display
Control Button area
Humidity setting area

APP interface icon and comments
Thermostat panel operation instruction
1.Reset device: When the air conditioning is on standby, long-press switch
button until hearing 10 times beep. The panel displays “00”or “01”, press the
button “up and down”to choose “01”, then press the other button, you may
hear one-second long beep, that means the device resetting succeed. If there
is no long beep, please operate again.
2.Restart device: When the air conditioning is on standby, long-press switch
button until you hear 10 times beep. The panel displays “00” or “01”, press
the button “up and down” to choose “01”, then press the other button, you
may hear one-second long beep, that means the device restart succeed. If
there is no long beep, please operate again.
3.Light up the screen: the screen of device will be black after 30 seconds of
non-operation, you can press any button to light the screen up.
4.Mode Selection: You may switch over the air conditioning running mode
after pressing the mode button.
5. Wind speed setting: Under the cooling mode, if the indoor temperature is
over the setting temperature, you may press the wind speed button and
adjust the wind speed，otherwise, you cannot adjust; Under the heating
mode of fan coil and floor heating fan coil, the indoor temperature is less
than the setting temperature, you may press the wind speed button and
adjust the wind speed, otherwise, you cannot adjust; You can not adjust the
wind speed under the floor heating mode.
6.Device lock: You may lock the device when you long-press mode button.
After locking, you can switch on/off the air conditioning through APP interface
only. The other panel button and APP button are all invalid. You can unlock
the device when you long-press mode button again.
7.Modify time: When the device is on standby, long-press the wind speed
button, you may modify time after hearing one time beep. You press the
mode button and modify the item; Press up and down button to select
value; It can confirm the modification when you press wind speed
button again.
Switch
On/Off Mode Air Speed Energy Conservation Increase Temperature Decrease Temperature

FCC Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.
Please note that changes or modifications not expressly
approved by the party responsible for compliance could
void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference
in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
--Reorient or relocate the receiving antenna. --Increase the
separation between the equipment and receiver. --
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV
technician for help.