Dorel Asia Baby Relax DA7924-1 User manual

Model No:
UPC CODE:
NOTE:
Lot number:
(TAKEN FROM CARTON)
_____________________________________
THIS INSTRUCTION BOOKLET
0-65857-17762-6
DOREL ASIA
DA7924-1
6-Drawer Dresser
CONTAINS IMPORTANT SAFETY
INFORMATION. PLEASE READ AND
Date of purchase:
_______ / _______ / _______
KEEP FOR FUTURE REFERENCE.
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our
customer service department. We will replace the
part FREE of charge.
Tel #: [phone]
E-Mail: [email protected]
Fax #: [phone]
NEED HELP!
CALL US FOR ASSISTANCE
1-800-295-1980
DO NOT RETURN PRODUCT TO STORE
E-MAIL:[e-mail]

*
*
*Use the wall safety strap provided to secure the unit to the wall.
*A Phillips head screw driver is not included.
*
*
*
*
*
Serious or fatal crushing injuries can occur from furniture tip over. To help prevent tipover:
* Install tipover restraint provided.
* Place heaviest items in the lower drawers.
* Unless specifically designed to accommodate, do not set TVs or other heavy objects on top of this product.
* Never allow children to climb or hang on drawers, doors or shelves.
* Never open more than one drawer at a time.
* Do not defeat or remove the drawer interlock system.
* Use of tipover restraints may only reduce, but not eliminate, the risk of tipover.
CARE AND CLEANING
Assembly will require two people.
Estimated assembly time: 60 minutes.
To avoid unnecessary damage, when levelers have been extended, DO NOT drag across surface
when moving. Be sure to lift and carry the item to its location.
WARNING: Should this product become damaged,
and/or components are broken or missing, DO NOT
USE.
Check bolts/screws periodically and tighten them if necessary.
Dust regularly with a soft, lint-free cloth to prevent soil build-up. A damp cloth may be used occasionally
to clean surface. Dry immediately. Do not use any abrasives that may damage finish. Excessive
exposure to sunlight and extreme changes in temperature and moisture can damage wood furniture.
MAINTENANCE
Dorel warrants its product to be free from defects in material and workmanship and agrees to remedy
any such defect. This warranty covers 1 year from the date of original purchase. This warranty is valid
only upon presentation of proof of purchase. This is solely limited to the repair or replacement of
defective furniture components and no assembly labor is included. This warranty does not apply to any
product which has been improperly assembled, subjected to misuse or abuse or which has been
altered or repaired in any way. This warranty gives you specific legal rights and you may also have
other rights which vary from State to State.
LIMITED WARRANTY
WARNING
CUSTOMER SERVICE
If you are missing parts or have any questions about this product, contact our customer service
representative first!
CALL 1-800-295-1980
Customer Service Department No. 413
You can also order parts by writing to the address listed below. Please include the product model
number, color and a detailed description of the part.
12345 Albert-Hudon Boulevard, Suite 100
CAUTION: Adult assembly required.
DO NOT use power tools.
Montreal, Quebec
E-MAIL: [email protected]
Canada H1G 3L1
NOTES
Ensure all parts and components are present before beginning assembly.
Assemble on a soft, smooth surface to prevent damage to the product finish.

HARDWARE LIST
1 2 3
4 5 6
7 8 9
10 11 12
13
Ø3.5 X 15mm
Ø5/32 X 25mm
KNOB
12 PCS
Ø4 X 25mm
ALLEN KEY
1 PC
SAFETY STRAP
1 KIT
CAM BOLT
18 PCS
WOOD DOWEL
24 PCS
SCREW
16 PCS
6-Drawer Dresser
DA7924-1
Ø8 X 30mm
Ø6 X 20mm
Ø4 X 25mm
SCREW
28 PCS
SHORT BOLT
12 PCS
CAM BOLT
24PCS
WOOD DOWEL
21 PCS
CAM LOCK
18 PCS
CAM LOCK
24PCS
Ø1/4 X 13 X 30mm
SHORT BOLT
2 PCS

PARTS LIST
A B C D
E F G H
I J K L
M N O
LEFT DRAWER FRONT
1 PC
FRONT BOTTOM RAIL
TOP PANEL
6 PCS
RIGHT DRAWER FRONT
6 PCS
6 PCS
DRAWER BACK
RIGHT SIDE PANEL
1 PC
6-Drawer Dresser
DA7924-1
6 PCS
3 PCS
3 PCS
DRAWER RIGHT SIDE
FRONT TOP RAIL
BACK TOP RAIL
DRAWER BOTTOM
BACK BOTTOM PANEL
1 PC
DRAWER LEFT SIDE
1 PC
LEFT SIDE PANEL
1 PC
1 PC
1 PC
BACK TOP PANEL
1 PC
1 PC
MIDDLE PANEL

STEP 1
6-Drawer Dresser
DA7924-1
Insert cam bolt (1) into the front bottom rail (I) as shown.
Insert cam locks (2) into the middle panel (C).
Attach front bottom rail (I) to middle panel (C) with wood dowels (3) as shown. Secure the middle
panel (C) by rotating the cam lock (2) 1/2 turn clockwise using a Phillips head screwdriver (not
included).
1
1 pc
21 pc
3
1 pc
1
I
32
I
C
3
2

STEP 2
6-Drawer Dresser
DA7924-1
Insert cam bolts (1) into the back bottom panel (F) as shown.
Insert cam locks (2) into the middle panel (C).
Attach back bottom panel (F) to the middle panel (C) with wood dowel (3) as shown. Secure the
rails by rotating the cam lock (2) on middle panel (C) 1/2 turn clockwise using a Phillips head
screwdriver (not included).
1
1 pc
21 pc
3
2 pcs
1
F
I
2
3
F
C
1
F
I
2
3
F
C

STEP 3
6-Drawer Dresser
DA7924-1
Insert cam bolts (1) into the front top rails (H) and back top rails (G) as shown.
Insert cam locks (2) into the middle panel (C).
Attach front top rails (H) and back top rails (G) to the middle panel (C) with wood dowel (3) as
shown. Secure the rails (G & H) by rotating the cam lock (2) on middle panel (C) 1/2 turn clockwise
using a Phillips head screwdriver (not included).
1
2 pcs
22 pcs
3
2 pcs
F
H
I
3
H
2
F
1
G
G
2
3
2
1
HG
3
G
H
I
C
F

STEP 4
6-Drawer Dresser
DA7924-1
Insert cam bolts (1) into the right & left side panels (B & D) as shown.
D
1
1
B
1
8 pcs
1
B
D

STEP 5
Insert wood dowels (3) and cam locks (2) into front and back rails (I & H & G) and back bottom
panel (F) as shown.
Attach side panels (B & D) to the assembled unit.
6-Drawer Dresser
DA7924-1
Secure side panels (B & D) to the assembled unit by rotating the cam locks (2) 1/2 turn clockwise
using a Phillips head screwdriver (not included).
Secure side panels (B & D) to front rail (I) using bolts (13) and Allen key (11) as shown below.
28 pcs
3
10 pcs
13
2 PCS
CG
13
13
H
F
D
B
2
3
I
11
1PC
2
1
D
H
3
B
F
I
2
D
13
I

STEP 6
6-Drawer Dresser
DA7924-1
Insert cam bolts (1) into the top panel (A) as shown.
A
1
1
6 pcs

STEP 7
6-Drawer Dresser
DA7924-1
Insert wood dowels (3) and cam locks (2) into the side and middle panels (B, D & C) as shown.
Place top panel (A) on the assembled unit and secure it by rotating cam locks (2) 1/2-turn clockwise
using a Phillips head screwdriver (not included).
Further secure top panel (A) to the assembled unit with screw (7) and a Phillips head screwdriver
(not included).
26 pcs
3
6 pcs
7
4 pcs
C
B
A
2
D
7
3

STEP 8
6-Drawer Dresser
DA7924-1
Attach back top panel (E) to the assembled unit with screws (8) as shown.
Use a Phillips head screwdriver (not included) to tighten the screws.
8
16 pcs
A
8
D
E

STEP 9
6-Drawer Dresser
DA7924-1
Insert cam bolts (4) into the drawer front (N & O) as shown.
Insert wood dowels (6) and cam locks (5) into the drawer left and right sides (K & M) as shown.
Secure the drawer left and right sides (K & M) to drawer fronts (N & O) by rotating the cam locks (5)
1/2 turn clockwise using a Phillips head screwdriver (not included).
Slide the drawer bottom (L) into the grooves of drawer left and right sides (K & M) and drawer front
(N & O).
N
L
KK
5
6
L
N
O
M6
M
4
O
4
5
N O
4
24 pcs
5
24 pcs
6
24 pcs
O
10
9
N
10
9
6
M
7
L
K
J
N
O
J
N
N
M
K
M
K
N
L
O
O
6
5
4
M
O
5
K
4
O
10
9
N
10
9
6
M
7
L
K
J
N
O
J
N
N
M
K
M
K
N
L
O
O
6
5
4
M
O
5
K
4

STEP 10
6-Drawer Dresser
DA7924-1
Attach knobs (10) to the drawer fronts (N & O) with bolts (9) using a Phillips head screwdriver (not
included).
Repeat steps 9 and 10 to assemble the other drawers.
Attach drawer back (J) to the drawer sides (K & M) with screws (7) using a Phillips head
screwdriver (not included).
7
24 pcs
10
12 pcs
9
12 pcs
O
9
10
N
10
9
O
10
9
N
10
9
6
M
7
L
K
J
N
O
J
N
N
M
K
M
K
N
L
O
O
6
5
4
M
O
5
K
4

STEP 11
Insert all drawers into the assembled unit.
6-Drawer Dresser
DA7924-1
O
O
N
N
NO

That's it! You've finished assembling your 6-Drawer Dresser!
CAUTION: This unit is intended for use only with the
products and/or maximum weights indicated. Use with
other products and/or products heavier than the
maximum weights indicated may result in instability or
cause possible injury.
6-Drawer Dresser
DA7924-1
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our customer service
department. We will replace the part FREE of charge.
Tel #: [phone]
E-Mail: [email protected]
Fax #: [phone]
NEED HELP!
CALL US FOR ASSISTANCE
1-800-295-1980
DO NOT RETURN PRODUCT TO STORE
E-MAIL:[e-mail]
Top panel maximum
weight 30 lbs.
Drawer Maximum
weight 15 lbs.

MODEL #: DA7924-1
PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE
PLEASE CONTACT CUSTOMER SERVICE REPRESENTATIVES AT THE FOLLOWING
NUMBERS SHOULD THERE BE ANY MISSING OR DEFECTIVE PART(S).
Customer Service Phone Number 1-800-295-1980
Customer Service Fax Number 514-353-7819
Request Date:
Name:
Shipping Address:
Street & Number:
City & State:
Zip Code:
Day Time Phone Number:
(including area code)
Date & Place of Purchase:
Part(s) description and quantity (Please be sure to list model number or SKN number):
Customer Service
Customer Service Representative Mailing Address:
Customer Service Department No. 413, 12345 Albert-Hudon Boulevard, Suite 100, Montreal, QC, Canada, H1G 3L1
Email: [email protected]

Furniture Wall Safety Strap
A B C D
TOOLS NECESSARY: RUBBER MALLET AND PHILLIPS SCREW DRIVER ARE NOT INCLUDED.
NOTE: 3/8" DRILL BIT AND ELECTRIC DRILL ARE NOT PROVIDED.
PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE
USING THIS PRODUCT AND KEEP THESE INSTRUCTIONS FOR
FUTURE REFERENCE. IF YOU HAVE ANY QUESTIONS, PLEASE
CALL OUR CUSTOMER SERVICE NUMBER: 1-800-295-1980.
MOUNTING BRACKET
4 PCS
SAFETY WALL STRAP
2 PCS
LONG SCREW
2 PCS
SHORT SCREW
2 PCS
WARNING: WHEN UPRIGHT, IT IS POSSIBLE THAT THE FURNITURE
MAY TIP OVER. PLEASE INSTALL THE SAFETY WALL STRAP BEHIND
THE FURNITURE TO ENSURE SAFETY.
Step 1:
ATTACH A MOUNTING BRACKET (A) SECURELY TO THE BACK EDGE OF THE FURNITURE USING THE
SHORT SCREW (D), THROUGH THE SMALLER HOLE.
Step 2:
LOCATE THE OTHER MOUNTING BRACKET (A) ON THE WALL OVER A WALL STUD AND 2 INCHES
BELOW THE MOUNTING BRACKET SECURED TO THE BACK OF YOUR UNIT. ATTACH TO THE WALL
STUD USING THE LONG SCREW (C) PROVIDED, THROUGH THE SMALLER HOLE.
Step 3:
PLACE THE FURNITURE INTO POSITION SO BOTH MOUNTING BRACKETS ARE VERTICALLY IN LINE.
LACE THE END OF THE SAFETY WALL STRAP (B) THROUGH THE LARGER HOLE IN EACH MOUNTING
BRACKET (A). BRING BOTH ENDS TOGETHER AND SLIDE THE FLAT END THROUGH THE LOCKING
END AND DRAW IT THROUGH UNTIL ALL SLACK IS REMOVED.
Step 4:
CONFIRM THAT THE STRAP IS SECURELY LACED AND LOCKED.
TO MOVE THE FURNITURE AFTER THE SAFETY WALL STRAP HAS BEEN INSTALLED, SIMPLY
REMOVE THE SCREW FROM THE WALL TO LOOSEN THE SAFETY WALL STRAP.
AB BAB

Modelo No:
CODIGO UPC:
NOTA:
PARA REFERENCIA FUTURA.
Numero de lote:
(TOMADO DEL CARTON)
_____________________________________
_______ / _______ / _______
ESTE MANUEL DE INSTRUCCIONES
CONTIENE INFORMACIÓN DE
SEGURIDAD IMPORTANTE.
POR FAVOR LÉALO Y CONSÉRVELO
Fecha de compra:
DOREL ASIA
DA7924-1
Cómoda de 6 Cajones
0-65857-17762-6
NO DEVUELVA EL PRODUCTO A LA TIENDA
Si falta una pieza o está dañada, contacte nuestro
departamento de servicio a la clientela. Reemplazaremos la
pieza SIN cargo.
Tel #: [phone]
Correo electrónicol: [email protected]m
Fax #: [phone]
NEED HELP!
CALL US FOR ASSISTANCE
1-800-295-1980
DO NOT RETURN PRODUCT TO STORE
E-MAIL:[e-mail]

* El destornillador en cruz no está incluido.
* El armado y la manipulación pueden requerir dos personas.
* El tiempo de armado se estima en 60 minutos.
GARANTÍA LIMITADA
ADVERTENCIA: Si este producto se ha dañado, y/o sus
componentes están rotos o faltan, NO LO USE.
* El uso de la sujeción provista reduce el riesgo de que el mueble se vuelque, pero no lo elimina totalmente.
CUIDADO Y LIMPIEZA
Límpiela regularmente con un paño suave para evitar la acumulación de suciedad. Ocasionalmente se puede usar un paño húmedo para
limpiar la superficie. Séquela inmediatamente. No utilice productos abrasivos que puedan dañar la terminación. Una exposición excesiva
a la luz del sol y a cambios extremos de temperatura y humedad puede dañar los muebles de madera.
MANTENIMIENTO
Verifique las arandelas/tornillos periódicamente y ajústelos si es necesario.
Dorel garantiza que este producto está libre de defectos de material y mano de obra y se compromete a remediar cualquiera de esos
defectos. Esta garantía cubre 1 año a partir de la fecha de compra original. Esta garantía es válida únicamente si se presenta una prueba
de compra. Esto se limita solamente a la reparación o reemplazo de componentes defectuosos de los muebles y no incluye el trabajo de
armado. Esta garantía no se aplica a ningún producto que haya sido armado de manera inadecuada, sujeto a un mal uso o abuso o que
haya sufrido cualquier tipo de alteración o reparación. Esta garantía le da derechos legales específicos y usted puede también tener otros
derechos que pueden variar de estado al estado.
NOTA
* Antes de comenzar a armarla, asegúrese de identificar todas las piezas y componentes
* No eliminar o retirar el dispositivo que asegura los cajones.
* Utilice la correa de seguridad provista para fijar el mueble a la pared.
* No use herramientas eléctricas.
* PRECAUCIÓN: Requiere ser armado por un adulto.
* Para evitar dañar la superficie, una vez instalados los niveladores, NO arrastrar el mueble para desplazarlo.
Asegúrese de levantarlo.
ADVERTENCIA:
Pueden producirse lesiones graves o fatales si el mueble se vuelca. Para prevenirlo:
* Instalar la sujeción provista.
* Ensamble sobre una superficie suave, lisa para evitar daños en el acabado del producto.
* Colocar los artículos más pesados en los cajones más bajos.
* No colocar aparatos de TV u otros objetos pesados sobre este producto, a menos que esté específicamente diseñado para ese uso.
* Nunca permitir que los niños trepen sobre los cajones, puertas o estantes o se cuelguen de ellos.
* Nunca abrir más de un cajón a la vez.
12345 Albert-Hudon Boulevard, Suite 100
Montreal, Quebec
Canadá H1G 3L1
Correo electrónico: [email protected]
SERVICIO A LA CLIENTELA
Si faltan piezas o tiene alguna pregunta sobre este producto, ¡primero contacte nuestro representante de servicio a la
clientela!
LLAME AL 1-800-295-1980
También puede pedir piezas escribiendo a la dirección indicada abajo. Por favor incluya el número de modelo, color y una
descripción detallada de la pieza.
Departamento de Servicio a la Clientela No. 413