Dorel Home Products DA2038329 User manual

B34DA203832900-120201
Date ofPurchase
A.N. -2020/7/7
Lot Number
Thank you for purchasing from DOREL!
THIS INSTRUCTION BOOKLET CONTAINSIMPORTANT SAFETY
INFORMATION. PLEASE READ AND KEEP FOR FUTUREREFERENCE.
1
© 2014 Dorel Home Products All RightsReserved
Weight Limit: 400 Lb / 181 Kg
DA2038329 (Gray Velvet), DA2038729 (Green Velvet)
2 Seater Loveseat Sofa
DO NOT RETURN TO THE STORE !
If parts are missing or damaged, we will gladly ship your
replacement parts free of charge.
Visit www.dhpfurniture.com/eng/replacement-parts
or call Toll-Free 1-800-267-1739
You can also chat with us atwww.dhpfurniture.com

DO NOTuse
powertools
2
1hour
This product is shipped in
1 carton
Limited 1 year Warranty
Dorel warrants this product to be free from defects in material and workmanship
and agrees to remedy any such defect. This warranty covers one year from the
date of original purchase from authorized retailers. This is solely limited to the
repair or replacement of defective parts and assembly labor is notincluded.
This warranty does not apply to any product which has been improperly
assembled, subjected to misuse or abuse or which has been altered or repaired
in any way.The warranty does not cover wearing, tearing, fading or splitting of
the fabric (where applicable). Liability for consequential damages is excluded to
the extent exclusion is permitted by law. This warranty gives you specific legal
rights and you may also have other rights which vary from state to state or
province to province.
To obtain warranty service, purchaser must present original bill of sale.
Components repaired or replaced are warrantedthrough the remainder of the
original warranty period only. The defective components will be repaired or
replaced without charge, subject to the terms and conditions describedabove.
Visit www.dhpfurniture.com to view the limited warranty valid in the U.S. and
Canada.
Contact Us!
For help with assembly, identifying parts, product information or to order parts,
please contact us:
DHP Consumer Services
12345 Albert Hudon, Suite 100,
Montreal, Quebec H1G 3L1
[e-mail]
1-800-267-1739
Monday toFriday
Saturday
Sunday
9 am to 9 pm (EasternTime)
10 am to 6:30 pm (EasternTime)
11 am to 7 pm (EasternTime)
Chat
withus! www.dhpfurniture.com
Read Before Beginning Assembly
●Work in a spaciousarea and near where the unit will be used, preferably on a
carpet, or use a piece of the cardboardpackagingto protect your floor and product.
●Make sure all parts are included.Most parts are labeled or stampedon theraw
edge.
●Read each step carefully. It is very important that each step of the instructionsis
performed in the correct order. If these steps are not followed in sequence, assembly
difficulties will occur.
●This product may contain small components. Please ensure that they are kept
away from small children.
●This product is designed for home use and is not intendedfor commercial use.

PARTS
3
A
B
C
D
E

PART
LABELS DA2038329 (Gray Velvet) DA2038729 (Green Velvet)
A T630560 T630610
B T630570 T630620
CT630580 T630630
D T630590 T630640
E T630600 T630650
Arm B and Arm C are packed
insideSeat A.
PARTS LIST
Seat
1PC Armrest 1PC Armrest 1 PC
Back
1 PC Leg 4 PCS
4
A B C
DE
Each part has a unique part number. Please reference the appropriate part
number when contacting customer service for replacement parts.
Before throwing any packaging, please verify all contents and make sure
you have received all the parts listed above!

Please do not completelytighten all the hardware, until the
entire assemblyis complete, unless otherwise indicated in
the step-by-step instructions.
The screw(s), bolt(s) to be used at each step are shown in
actual size in the lower right corner ofthe page.
HardwarePack
HARDWARE LIST
Plastic Washer M10
X 4
5
1
DA2038329(GrayVelvet)
DA2038729(GreenVelvet) HP#: TDA2038329-00

Step 1
6
Carefully unpack parts/hardware from the
storage of the seat body and place on a
clean flat surface.
A

Step 2
7
Place both arms (B), (C) as shown
below, secure the two legs (E) and
plastic washers (1) into the pre-drilled
holes at the bottom of the arms. Please
do not overtighten them.
E
E
BC
1
1
1
/

Step 3
8
Carefully lift and turn upright the
assembled arms (B) & (C) on their legs.
Attach the seat (A) to its arms (B) & (C)
by inserting the metal brackets on seat (A)
into the metal glides on the arms (B) & (C)
as shown below.
Make sure everything is placed correctly.
B
C
A

Step 4
9
Insert the backrest placing its ear piece
metal plates on both arms’s (B) & (C)
brackets as shown below.
Make sure everything is placed correctly.
C
B
E
D
A

Step 5
10
Stretch and pull down the rear fabric
cover evenly before securing it with the
Velcro strip to the seat base.
Repeat if necessary to achieve a better fit.