DORIC Fan Power Adapter User manual

Fan Power Adapter
User Manual
Version 1.0.1

Contents
1 General Overview 3
1.1 Fan Power Adapter ................................................... 3
2 Operations Guide 4
2.1 Getting Started ...................................................... 4
2.2 Notes & Special Features ................................................ 5
2.3 Specifications ....................................................... 5
3 Support 6
3.1 Maintenance ....................................................... 6
3.2 Warranty ......................................................... 6
3.3 Contact us ........................................................ 6
2

1
General Overview
1.1 Fan Power Adapter
The Doric Fan Power Adapter allows the usage of legacy LED light sources (LEDC1) with the next-generation LED light
source driver (LEDD). The next-generation driver no longer provides power for the cooling fan of the LEDC1.
Figure 1.1: Fan Power Adapter
The Fan Power Adapter is also necessary to use certain models with next-generation LED light source drivers.
• Combined LED light sources (LEDC2, LEDC3, LEDC4).
• Combined LED light sources with fiber-optic rotary joint (all LEDFRJ models).
3

2
Operations Guide
2.1 Getting Started
Figure 2.1: Fan Power Adapter Installation Schematic, LEDC1
1. Connect the Power Splitter to the 12 V power supply.
2. Connect one output of the Power Splitter to the Doric LED Driver 12 V input, the other to the Power Extension Cable.
3. Connect the Power Extension Cable to the Fan Power Adapter 12 V input.
4. Connect each channel of the LED driver to the input connectors of the Fan Power Adapter using M8 cables.
4

5. Connect the LED light source to the Fan Power Adapter using M8 cables.
6. Connect the 12 V power supply to the wall plug.
7. Ensure the power key and the interlock (green) connectors are properly set in place.
8. Switch ON the LED driver.
2.2 Notes & Special Features
• When using the Fan Power Adapter for retro-compatibility with LEDC1 series products, the LED driver will display
Unplugged. This will not prevent LEDs from working properly.
• If the Fan Power Adapter is not connected to the 12 V power supply, a safety feature will stop all LEDs to avoid
overheating.
2.3 Specifications
Table 2.1: General Specifications
SPECIFICATIONS VALUE NOTES
Power Supply 110-240 VAC; 50-60 Hz Power supply adapter included
DC Power Supply 12 VDC -
Dimensions 97.6 x 52.3 x 20.8 mm3-
Table 2.2: Environmental Specifications
DESCRIPTION OPERATION STORAGE
Use Indoor -
Temperature 0-40 ◦C 0-40 ◦C
Humidity 10-80% RH, non condensing 10-80% RH, non condensing
Altitude 2000 m 2000 m
Chapter 2. Operations Guide 5

3
Support
3.1 Maintenance
The product does not require any maintenance. Do not open the enclosure. Contact Doric Lenses for return instructions
if the unit does not work properly and needs to be repaired.
3.2 Warranty
This product is under warranty for a period of 12 months. Contact Doric Lenses for return instructions. This warranty
will not be applicable if the unit is damaged or needs to be repaired as a result of improper use or operation outside the
conditions stated in this manual. For more information, see our Website.
3.3 Contact us
For any questions or comments, do not hesitate to contact us by:
Phone [phone]
Web doriclenses.com/contact
Email sales doriclenses.com
© 2017 DORIC LENSES INC
357 rue Franquet - Quebec, (Quebec)
G1P 4N7, Canada
Phone: [phone] - Fax: [phone]
www.doriclenses.com
Chapter 3. Support 6