DP Audio Video DVR120 User manual

User’s Manual
DVR120
__________________________________________________
1. USB Connection
2. SD Card Slot
3. Speaker
4. Mount Socket
5. Microphone
6. Battery Cover
7. Lens
8. Infrared Lamp
9. Power Button
10. Record Button
11. Display
12. Menu Button
13. Down Button
14. Up Button
15. Mode Button
In The Box:
DashCam
5C Lithium Batteries
Mounting Bracket
USB Cable
Car Charger
User’s Manual

Directions for Use:
Charging (two methods):
A) Use the built-in rechargeable lithium battery
1) Connect the DashCam to a computer or USB charger with the USB cable.
2) The red indicator light will turn on to indicate the DashCam is charging. When it is done
charging, the light will turn off.
Note: When using the lithium battery powered DashCam, press the power button to
start or stop recording videos.
B) Connect the 12V/24V car charger
1) After starting your car, the DashCam will automatically start recording.
2) The DashCam will stop working after the power is turned off and will automatically save
the recording.
Note: Use the 5V car charger
When the battery power is low, the DashCam screen will display "electricity shortage”.
Function introduction
DashCam with video / photo / audio playback
A) Video mode
Press the power switch button or connect car charger to turn on DashCam. The
DashCam will automatically turn on in video mode.
When connected to car charger, the DashCam will automatically enter video recording
mode and start to record. The red indicator light will turn on.
To manually begin video recording, press the record button .
Press the button to stop recording. The red indicator light will turn off.
Note: Please insert an SD card into the SD card slot before use. All recorded files will be
stored on the SD card.

B) Camera mode
Turn on the DashCam and press the button to enter the camera mode. Press the
camera button to take pictures. Press the menu button to enter camera settings.
C ） Playback mode
Turn on the DashCam and press the mode button three times to enter playback mode.
Press the menu button to enter the playback menu. Press the up/down button to
navigate and select the files you want. Then press the button to play or pause file.
Press the menu button to return to previous screen and exit.
D) Delete function
In playback mode, press the menu button to enter the playback menu. Use the
up/down buttons to select “Delete”. Then press the button twice and select “Yes” with
the button to delete. Press the menu button to return to previous screen and exit.
E) Enter the Settings Menu in Video Mode
Press the menu button and then the mode button to enter the Settings Menu.
Press up/down to navigate the different options. Press the REC button to select an
option. Repeat previous steps to navigate sub-menu and press REC button to select.
Press the menu button to return to previous screen and exit.
1) Time setting: Change date, time, and time display. Press the menu button to enter

menu. Then press mode button to enter the settings menu. Select “Date & Time” with
REC button . Press UP/DOWN button to set the date, time, & display, and use the
MENU/MODE buttons to navigate left and right. When you are finished setting the time,
press the REC button to exit and return to the settings menu.
2) Motion Detection: Go to Video Mode Settings to turn Motion Detection on or off. When
Motion Detection is turned on, the DashCam will automatically begin video recording
when movement is detected.
3) Recording: Press the button to turn on or off.
4) Cycled Recording Function: When the SD card is full, the DashCam will automatically
delete the oldest files and overwrite them with new files.
5) Formatting:When you select “Yes” all the stored files will be cleared from your SD card.
6) Languages: 18 languages total
7) Reset system: When you select “Yes” the DashCam will reset and restore factory
settings.
8) IR lamp frequency: 50HZ/60HZ
IR lamp has automatic infrared night vision.
Download the file
1) Connect the DashCam to a computer by using the included USB cable.
2) Select the removable disk displayed on your computer.
3) Download the files you want from the DCIM/100MEDIAfolder.
Operation tips: If the DashCam crashes, remove the battery, then reboot.
Technical Specifications

1) 2.5” Swivel LCD Screen
2) Records 720p Video
3) 5MP Camera Mode
4) ¼ color CMOS HD Image Sensor
5) Night Vision
6) SD Card Slot Supports up to 32GB
7) USB connection
8) High Speed Recording
9) Cycled Recording
10) Power input: DC5V
11) Rechargeable Battery
12) Built-in Microphone