
Front Panel:
Rear Panel:
1 2 3 4 5 6 7 8 9 10 11
12
1. Input: Input jack for your guitar. Hi is for normal use. LO has 3 dB less gain. Use LO with Humbucker equipped
guitars for a cleaner sound.
2. Volume: Controls overall gain. Set over half way for over-driven sounds. Set below half way for cleaner sounds.
3. Treble: Controls overall high frequency response.
4. Mid: Controls overall mid frequency response.
5. Bass: Controls overall low frequency response.
6. Reverb: Turn clockwise to add reverb.
7. Cut: Controls overall tone/presence of amp. Turn clockwise for chime.
8. Master: Controls overall amp volume and output tube compression.
9. Stand-By:
for extended break periods.
10. Power:
11. Power Indicator: Lights up when power is switched on. If bulb fails replace with type T47.
12. EQ bypass footswitch jack:
EQ bypass/gain boost mode. The variable boost footswitch features an added knob to control the amount of boost.
Simply turn this knob clockwise to increase the amount of boost.
13. Send Jack:
14. Return Jack:
15. 4 OHM Speaker Jack:
its best and avoid damage.
16. 8 OHM Speaker Jack:
its best and avoid damage.
17. 16 OHM Speaker Jack:
its best and avoid damage.
18. Half Power Switch:
.
19. Fuse:
20. AC Inlet:
13
14
15 16 17
181920