Dragon Touch D1 User manual

USER
MANUAL
D1 Car Dash Camera
Please read this manual before operating your car dash camera,
and keep it for further reference.

12
D1 Dash Camera
Car Charger Adapter Hardwire Kit +
Five Cable Clips Quick Reference Guide
USB Cable Suction Cup
USER
MANUAL
D1 Car Dash Camera
1. MIC 2. RE
3. Video / OK 4. Mode
5. Emergency Save 6. Power
7. Charging Indicator 8. Recording Indicator
9. Display 10. TF Card Slot
11. UP 12. Menu
13. Down 14. DC Power / USB Interface
CAMERA OVERVIEW
WHAT’S IN THE BOX?
10
2
1
11
12
13
98
14
3
4
5
6
7

12
D1 Dash Camera
Car Charger Adapter Hardwire Kit +
Five Cable Clips Quick Reference Guide
USB Cable Suction Cup
USER
MANUAL
D1 Car Dash Camera
1. MIC 2. RE
3. Video / OK 4. Mode
5. Emergency Save 6. Power
7. Charging Indicator 8. Recording Indicator
9. Display 10. TF Card Slot
11. UP 12. Menu
13. Down 14. DC Power / USB Interface
CAMERA OVERVIEW
WHAT’S IN THE BOX?
10
2
1
11
12
13
98
14
3
4
5
6
7

Upon turning on the camera, press the “OK” button to stop recording.
1. Menu : Enter and exist menu.
• Press the button one time to enter to recording mode settings.
• Press twice times to enter to system settings.
• Press third times to back to the main interface.
2. UP : Choose the option above.
3. Down : Choose the option below.
• Press the button to turn on / off the MIC.
4. OK: Confirm the option
• When in system settings, press it confirm the option.
• When in recording mode, press it to start or stop recording.
5. Mode “M” : Playback
• Press the button one time to enter to playback.
• Press twice times to back to the main interface.
6. Lock : Lock the video manually.
7. Power : Short press it to turn on / off the screen, long press it to turn
on / off the camera.
34
1
2
3
①Insert the USB car charger into your car’s cigarette lighter socket.
②Insert the USB end of the USB power cord into the USB car charger.
③Insert the Micro USB into the dash cam USB port
(Charger Specification: In: DC 12-24V, Out: DC 5V 2A)
PLEASE NOTE:
1. The battery takes about two hours to be charged fully.
2. When the battery is charging, the indicator light on the top left of the screen will be
stayed red; When it charged fully, the light goes off.
3. To avoid damage to the device, please do not charge the battery via the USB data
cable with other adapters.
CHARGING THE BATTERY
BUTTONS INTRODUCTION

Upon turning on the camera, press the “OK” button to stop recording.
1. Menu : Enter and exist menu.
• Press the button one time to enter to recording mode settings.
• Press twice times to enter to system settings.
• Press third times to back to the main interface.
2. UP : Choose the option above.
3. Down : Choose the option below.
• Press the button to turn on / off the MIC.
4. OK: Confirm the option
• When in system settings, press it confirm the option.
• When in recording mode, press it to start or stop recording.
5. Mode “M” : Playback
• Press the button one time to enter to playback.
• Press twice times to back to the main interface.
6. Lock : Lock the video manually.
7. Power : Short press it to turn on / off the screen, long press it to turn
on / off the camera.
34
1
2
3
①Insert the USB car charger into your car’s cigarette lighter socket.
②Insert the USB end of the USB power cord into the USB car charger.
③Insert the Micro USB into the dash cam USB port
(Charger Specification: In: DC 12-24V, Out: DC 5V 2A)
PLEASE NOTE:
1. The battery takes about two hours to be charged fully.
2. When the battery is charging, the indicator light on the top left of the screen will be
stayed red; When it charged fully, the light goes off.
3. To avoid damage to the device, please do not charge the battery via the USB data
cable with other adapters.
CHARGING THE BATTERY
BUTTONS INTRODUCTION

7. Parking Monitor (default is off)
• Default is off
• When there is no power input and the camera has been turned off, the camera will be
turned on automatically and start recording, the video will be saved and the camera
automatic shutdown after 30 seconds
1. Frequency - 50HZ / 60HZ two optional
• Default is 60HZ
2. Beep Sound
• Turn on or off the button sound
3. Language
• Choose camera’s language
4. Data / Time Setting
• Press button twice to enter to setting interface, choose Data / time.
• Press and to adjust the data and time, press “OK” to confirm the each
option, press to end the setting.
5. Format
• Every time you insert a SD card, please format it in the camera to ensure
that the SD card is compatible with the camera.
6. Default settings
• Restore the original settings
7. Version
• Check the camera’s version
SYSTEM SETTINGS
Press the menu button one time to enter to this mode, and press or to choose
the option.
1. Resolution - 1080FHD / 720P / VGA three optional
• Default setting is 1080FHD.
2. Loop Recording - off / 1 minute / 3 minutes / 5 minutes four optional
• Default setting is 3 minutes.
• The files will be saved every 3 minutes if you choose 3 minutes. When the memory
card is full, the new files will cover the old one if the loop recording is on, if it is off,
then the camera won’t work any more, please format the SD card or change a new
one.
3. WDR (Wide Dynamic Range)
• Default is on.
• Balance light and darkness in driving to get the best image automatically.
4. Audio Recording
• Default is on.
• Allows you to enable or disable audio recording with your videos.
5. Date Stamp
• Default is on.
• Stamp the date and time to the videos.
6. G-sensor - off / low / medium / high four optional
• Default is off
• Gravity Sensor means any collision will activate the camera to record, and the videos
will be locked which will never be covered by new files.
• The video is stored as a file every three minutes. When driving, if the road is bumpy,
please adjust it to low or turn off it directly to prevent the camera doesn’t work
because of the memory card is full. When parking, recommend you to adjust it to
medium.
RECORDING MODE SETTINGS
56

7. Parking Monitor (default is off)
• Default is off
• When there is no power input and the camera has been turned off, the camera will be
turned on automatically and start recording, the video will be saved and the camera
automatic shutdown after 30 seconds
1. Frequency - 50HZ / 60HZ two optional
• Default is 60HZ
2. Beep Sound
• Turn on or off the button sound
3. Language
• Choose camera’s language
4. Data / Time Setting
• Press button twice to enter to setting interface, choose Data / time.
• Press and to adjust the data and time, press “OK” to confirm the each
option, press to end the setting.
5. Format
• Every time you insert a SD card, please format it in the camera to ensure
that the SD card is compatible with the camera.
6. Default settings
• Restore the original settings
7. Version
• Check the camera’s version
SYSTEM SETTINGS
Press the menu button one time to enter to this mode, and press or to choose
the option.
1. Resolution - 1080FHD / 720P / VGA three optional
• Default setting is 1080FHD.
2. Loop Recording - off / 1 minute / 3 minutes / 5 minutes four optional
• Default setting is 3 minutes.
• The files will be saved every 3 minutes if you choose 3 minutes. When the memory
card is full, the new files will cover the old one if the loop recording is on, if it is off,
then the camera won’t work any more, please format the SD card or change a new
one.
3. WDR (Wide Dynamic Range)
• Default is on.
• Balance light and darkness in driving to get the best image automatically.
4. Audio Recording
• Default is on.
• Allows you to enable or disable audio recording with your videos.
5. Date Stamp
• Default is on.
• Stamp the date and time to the videos.
6. G-sensor - off / low / medium / high four optional
• Default is off
• Gravity Sensor means any collision will activate the camera to record, and the videos
will be locked which will never be covered by new files.
• The video is stored as a file every three minutes. When driving, if the road is bumpy,
please adjust it to low or turn off it directly to prevent the camera doesn’t work
because of the memory card is full. When parking, recommend you to adjust it to
medium.
RECORDING MODE SETTINGS
56

Name
Size
Net Weight
Screen
Micro SD Card
Dragon Touch Dash Cam
88.5mm x 56mm
60g
3 inch HD LCD display
16GB-32GB
(not in package)
Model
Lens Angle
Working Temperature
Battery
Max Video Resolution
D1
170°
14℉- 140℉
180mAh
1080P
1. Please safekeeping, prevent the lens from scratching and dirty.
2. Please pay attention to anti-fouling and moisture-proof.
3. Do not exposure the machine to the sun directly, prevent the built-in battery from
damage.
Q: Why the camera always say “no card inserted”?
A: 1. Please ensure that the memory card is class 10 and above.
2. Format the memory card on computer firstly. When you format it on computer,
please choose "FAT32(Default)" on File system, and choose "32 kilobytes" on
Allocation unit size.
3. Format it in the camera.
Q: The camera don’t work any more.
A: Please check whether the memory is full, if yes, please save the files and format the
SD card.
Q: The image is blurry.
A: The windshield will reflect the light, please adjust the camera.
Q: The camera lose power often.
A: Due to different vehicle designs, please rotate the car charger to adjust it keep stable.
PRECAUTIONS
TROUBLESHOOTING
Contact US
SPECIFICATIONS Q: The camera unable to be turned on.
A: Please make sure that whether the charge indicator light is on or off, if off, please
re-insert the car charger and reset the camera.
Q: All buttons are not responding.
A: Please reset the camera to restart.
Q: The camera doesn’t record automatically after turning on.
A: 1. Check whether the memory card is full or no.
2. Reformat the card, if this problem exists, please change a new card.
Q: The video has no voice.
A: Please confirm whether the recording indicator light is on. And in recording mode,
short press will close to record the voice.
Q: Menu button was no responding.
A: Because when the camera is recording, you can not operate the menu button, please
press OK button to stop recording
Q: The camera keeps turning on and off automatically.
A: please charge the camera via USB car charger, do not charge the battery via the USB
data cable with other adapters.
For any inquiries, issues or comments concerning our products, please send E-mail to
the address below, and we will respond as soon as possible.
E-mail: [e-mail]
US customer service line: [phone]
7 8

Name
Size
Net Weight
Screen
Micro SD Card
Dragon Touch Dash Cam
88.5mm x 56mm
60g
3 inch HD LCD display
16GB-32GB
(not in package)
Model
Lens Angle
Working Temperature
Battery
Max Video Resolution
D1
170°
14℉- 140℉
180mAh
1080P
1. Please safekeeping, prevent the lens from scratching and dirty.
2. Please pay attention to anti-fouling and moisture-proof.
3. Do not exposure the machine to the sun directly, prevent the built-in battery from
damage.
Q: Why the camera always say “no card inserted”?
A: 1. Please ensure that the memory card is class 10 and above.
2. Format the memory card on computer firstly. When you format it on computer,
please choose "FAT32(Default)" on File system, and choose "32 kilobytes" on
Allocation unit size.
3. Format it in the camera.
Q: The camera don’t work any more.
A: Please check whether the memory is full, if yes, please save the files and format the
SD card.
Q: The image is blurry.
A: The windshield will reflect the light, please adjust the camera.
Q: The camera lose power often.
A: Due to different vehicle designs, please rotate the car charger to adjust it keep stable.
PRECAUTIONS
TROUBLESHOOTING
Contact US
SPECIFICATIONS Q: The camera unable to be turned on.
A: Please make sure that whether the charge indicator light is on or off, if off, please
re-insert the car charger and reset the camera.
Q: All buttons are not responding.
A: Please reset the camera to restart.
Q: The camera doesn’t record automatically after turning on.
A: 1. Check whether the memory card is full or no.
2. Reformat the card, if this problem exists, please change a new card.
Q: The video has no voice.
A: Please confirm whether the recording indicator light is on. And in recording mode,
short press will close to record the voice.
Q: Menu button was no responding.
A: Because when the camera is recording, you can not operate the menu button, please
press OK button to stop recording
Q: The camera keeps turning on and off automatically.
A: please charge the camera via USB car charger, do not charge the battery via the USB
data cable with other adapters.
For any inquiries, issues or comments concerning our products, please send E-mail to
the address below, and we will respond as soon as possible.
E-mail: [email protected]
US customer service line: [phone]
7 8