Draper IntelliFlex I/O C156.305 User manual

IP Gateway - Part# C156.305
USER MANUAL

INSTRUCTION
PROGRAMMING
IPG - IP Gateway
Draper, Inc. | 411 S. Pearl St. Spiceland, IN 47385
draperinc.com | 765.987.7999 | 800.238.7999
© 2020 All Rights Reserved | FORM: IPG_Inst2020
IP B
IP A
5VDC
Input*
I/O Network
*Required only when
not connected to a
powered I/O network
BACK
VIEW
NDC Connection
Device
Network
NDC Connection Switch
Section 1 - Overview

INSTRUCTION
PROGRAMMING
IPG - IP Gateway
Section 2 - I / O Network Wiring
Section 3 - IP Network Wiring
IP Gateways can be wired as a standalone network or as part of a building network.
Network In
to Shade
Network
NDC
IP GATEWAY
I/O Network Wiring
Network Mode
I/O
Network
NDC Connection
Device
Network
Device In
NDC
IP GATEWAY
I/O Network Wiring
Device Mode
I/O
Network
to Shade
Network
NDC Connection
Device
Network
Network In
IP A
to Shade
Network
IP Wiring
Building Network
NDC
IP GATEWAY
I/O
Network
to Building
Network
Network In
Network In
NDC
to Shade
Network Network In
I/O
Network
NDC
to Shade
Network
I/O
Network
NDC
IP B
IP A
IP A IP A
to I/O
Network
IP GATEWAY IP GATEWAYIP GATEWAY
IP Wiring
Standalone
I/O
Network

INSTRUCTION
PROGRAMMING
IPG - IP Gateway
Section 3 - Screen Navigation
DEVICE LIST Device List is used to verify the devices on the connected I
/ O network.
The quantity of each type of device is shown.
This section allows for the configuration of a static IP address for the IP gateway.
CONFIGURATION IP Mode DHCP (Static)
IP Address 192.168.1.90
(Read Only if DHCP)
Subnet Mask 255.255.255.0
(Read Only if DHCP)
Default Gateway 192.168.1.1
(Read Only if DHCP)
MAC Address AABBCCDDEEFF
(read only)
This function resets the IP Gateway configuration to the default settings.
CONFIGURATION Factory Reset Do you want to restore factory settings? YES
NO