Draper 501043 User manual

Assembly Instructions
Volleyball Net Winders by Draper
Copyright © 2013 Draper Inc. Form VB-NetWinders_Inst13 Printed in U.S.A.
®
Parts List
Single Double Triple
Item Description Qty Qty Qty
1 Bottom Frame 1 1 1
2 Knock Down Tower Frame 1 1 1
3 Single, Double or Triple Top Frame 1 1 1
4 Winder Frame 1 2 3
5 Handle Frame 1 2 3
6 Swivel Mount Caster 3 3 3
7 M5 - 24 mm Spring Pin 1 2 3
8 38 mm x 38 mm Cap 4 4 4
9 19 mm x 38 mm Cap 2 4 4
10 Soft Vinyl Cap-Small 3 6 9
11 Soft Vinyl Cap-Large 1 2 3
12 Soft Vinyl Cap–Medium 3 3 3
13 M6 x 1-10 mm Knurled Cap Setscrew, ZP 1 2 3
14 M8 x 1.25 Socket Pan HD Screw, ZP 1 1 1
15 M10 x 1.5 HX HD Cap Screw, ZP (Short) 2 2 2
16 M10 x 1.5 HX HD Cap Screw, ZP (Long) 2 2 2
17 M10 x 1.5 Nylon Flange Lock Nut, ZP 4 4 4
18 M14 x 1 Nylon Flange Lock Nut, ZP 4 5 6
19 M8 x 1.25 Nylon Flange Lock Nut, ZP 1 1 1
20 M10 Flat Washer, ZP 4 4 4
21 M14 Steel Washer, ZP 1 2 3
22 M14 Nylon Washer 2 4 6
23 M8 Flat Washer, ZP 1 1 1
If you encounter any difficulties installing or servicing your transporter cart, call
your dealer or Draper, Inc., Spiceland, Ind., [phone], or fax [phone].
Caution
1 Read instructions through completely before proceeding.
2 Before each use check equipment for proper connecting hardware and
structural integrity.
3 Casters should be kept clean and free from debris to protect playing
surface from damage.
4 Use of this equipment, other than intended may be hazardous and re-
sult in injury. Do not ride on cart. Injury and/or damage to cart could
result.
5 Alteration or modification of this equipment may be hazardous and re-
sult in injury. For repair or replacement, contact your dealer or Draper,
Inc.
6 Unpack all parts and check against parts list to ensure that all have
been included.
7 Inspect all parts for damage. Report any damages to the trucking
company.
These instructions are meant as a guide only. They do not imply any
responsibility on part of Draper, Inc for improper installation or faulty
workmanship at the jobsite.
Tools required: Socket Wrench and or Box Wrench (1), Allen Wrench (1)
and Rubber Mallet (1).
1 Assemble base (see Fig. 1).
Figure 1
Please Note: Continued on page 2.
TripleDoubleSingle
Please Note: The location of Item #2 will determine the style (see Fig. 2—Double Net Winder shown as example).
Figure 2

Volleyball Net Winders by Draper page 2 of 2
www
.draperinc.com (765) 987-799
9
Single Double Triple
Completed Product Diagrams
2 Assemble K-frame (see Fig. 3) and handle (see Fig. 4).
Please Note: Item # 3 will depend on how many net keepers there are. Repeat this step for each handle of the net winder.
Figure 3
Figure 4