Draper TF-20J User manual

If you encounter problems, or need to replace
any parts, contact your dealer or Draper, Inc.
Draper, Inc. | 411 S. Pearl St. Spiceland, IN 47385
draperinc.com | 765.987.7999 | 800.238.7999
© 2018 All Rights Reserved | FORM: BackstopCareInfo18
CAUTION
1. Never work alone when inspecting superstructure or high wall attachments.
2. Consult installation instructions and project drawings for information on part
numbers and placement.
3. When calling Draper, Inc., with questions, please have your order number,
and, if possible, project drawing that was provided with your backstop.
Important Safety Information
MAINTENANCE
& OPERATION
EZ-Fold®Backstops
Section 1 - Operation
1. Make sure folding backstops can be seen from winch location or, if using electric
winches, from key switch location.
2. Only qualified personnel should operate folding backstops.
3. If using manual Height Adjusters, DO NOT use portable electric winch operator or
electric drill to operate.
4. Keep objects that may interfere with backstop operation out of the way.
5. Do not operate folding backstops while being maintenanced or repaired.
6. Keep keys for key switches in a safe place. If one of the keys is lost, contact
Draper, Inc. for a replacement.
7. Backstops do not have to be fully raised or lowered before changing direction of
fold.
8. Use winches only for their original purpose; if equipment changes are necessary,
contact Draper, Inc.
9. If you encounter a problem during installation or operation of your backstop,
contract Draper, Inc. immediately.
Section 2 - Maintenance / Inspection
Please Note: EZ-Fold® backstops by Draper, Inc., are designed to operate for
many years with a minimum of maintenance. Periodically inspect your
ceiling-suspended backstops to ensure they are in good repair and
operating properly. Check backstops at least once a year depending
on amount of use.
There is a maintenance checklist on the next page. Detach, make copies and hang
this list in a convenient location to help keep track of inspections and repairs.
Section 3 - Winches
1. Examine cable drum on winch for excessive wear or looseness. Ensure cable is
wrapping correctly, and that “stacking” (cable wrapping unevenly in layers) does
not occur.
2. Check key switch operation. Make sure keys work properly, and that inches
respond correctly.
3. Make sure winch is still properly anchored. Make sure anti-rotation bolts are
installed. If winch has slipped slightly, correct and tighten bolts using an impact
wrench.
Please Note: Draper EZ-Fold® winches are self-lubricating.
No periodic application of grease or oil is required.
by
Section 4 - Cable Run
1. Check cable sheaves for excessive wear or looseness. Make sure
cable is still passing properly through all pulley sheaves.
2. Inspect cable clamps for tightness; Make sure there is no
slippage.
3. Check aircraft cable for fraying.
(Hint: One way to do this is by running an oily rag along the
aircraft cable. The rag will snag on frays; it will also lubricate the
cable). If cable fraying is, contact your dealer or Draper, Inc. for
replacement.
Caution: Wear gloves when checking for frays!
Section 5 - Safety Belt
1. Check safety belt for tears or fraying.
2. Make sure connection to backstop is secure, and that clamps are
tight and in their original position.
3. Inspect safety belt structure attachment. Make sure bolts and
clamps are still tight, and that the unit has not slipped.
4. Pull on strap with a fast motion to make sure it locks properly.
Caution: Immediately discontinue use of backstops until
malfunctioning safety straps are replaced.
Section 6 - Backstop / Accessories
1. Inspect backstop attachment and superstructure. Make sure all
bolts and clamps are tight and have not shifted.
2. Work your way down the backstop, making sure all clamps are
tight and in their original positions. Check for cracks, corrosion, or
other signs of damage or excessive wear.
3. Make sure back, front and side braces are still at proper length,
and that jackknifes are folding correctly.
4. Check height adjuster for loose clamps and binding that keeps it
from operating correctly (if applicable).
5. Lubricate inner tubes of height adjusters with petroleum jelly.
6. Inspect bank and goal for cracks or bending. Also make sure top
of rim is still 10' above the floor, and level.
7. Check padding for tears, missing pieces, or loose sections.
Replace if necessary.
8. Use carpenter’s level to make sure backstop is still vertically
plumb, and that bank is horizontally level.
Section 7 - Replacement / Repairs
It is highly recommended that repairs or replacement of defective /
worn parts be carried out by a qualified installer. Contact your dealer
or Draper, Inc. to order replacement parts or obtain information on
installers in your area.

Page 2
INSPECTION ITEM DATE SATISFACTOREY CLEANED NEEDS REPAIRED
Winch Drum
Winch Belt
Winch Attachment
Aircraft Cable
Safety Belt
Pulleys/Sheaves
Back/Front Braces
Side Braces
Jackknife
Ceiling Attachments
Wall Attachments
Cable Clamps
Backstop Clamps
Hangers
T-Frame
Height Adjuster
Goal
Bank
Backboard Padding
Finish
Nets
Latch (TF-20-J)
MAINTENANCE &
INSPECTION LINK
EZ-Fold®Backstops by
Periodically inspect your backstops and all related equipment and attachments.
Frequency of inspections depends on use of the equipment. Use guidelines mentioned earlier in this manual when conducting inspections.
Below is a checklist to assist you in keeping a record of backstop inspections and maintenance.
Cut, copy and post this page as a record of previous inspections and equipment repairs on each backstop.
Place a checkmark or enter information in the appropriate box:

Page 3
25 YEAR LIMITED WARRANTY
EZ FOLD BASKETBALL BACKSTOP
DRAPER INC. (“The Company”) warrants its EZ Fold Basketball Backstop structure against defects in material or
factory workmanship for a period of twenty-five (25) years from the date of the original purchase (“The Warranty
Period”). This warranty is limited to the original purchaser, and applies only to the backstop structure, which shall
include the main backstop framework, jackknife, all ceiling superstructure clamps, hangers, and braces.
This warranty does not include 8' - 10' height adjustment units, winches, cables, cable guides, backboards, goals,
or safety belts. These items are covered by a separate warranty. (See next page.)
If a defect is discovered during the warranty period, The Company must be notified in writing within thirty days of
the discovery. The Company will, at their option, repair or replace the defective equipment at no cost for materials
to the purchaser.
The following use / conditions will void this warranty:
(A) Equipment that has not been installed according to the manufacturer’s specifications.
(B) Equipment that is used for purposes other than those for which originally designed.
(C) Equipment that is not used in accordance with generally approved practices.
(D) Disasters, whether natural or manmade, such as fire, flood, wind, earthquake, lightning, war, or vandalism.
(E) Unauthorized alterations to or modifications of the equipment not approved by The Company in writing.
(F) Any other abuses, neglect, or misuse of the equipment.
(G) Operation of the equipment by persons not properly trained for that purpose.
The Company’s liability under this warranty is limited to the repair or replacement of defective equipment. Your sole
and exclusive remedy against The Company shall be for the repair or replacement, at The Company’s option, of any
defective equipment. In no event shall The Company be liable for any incidental damage or consequential damages
relating to or arising out of or in connection with the use or performance of the equipment, including, without
limitation, bodily harm, any labor and / or other installation expenses incurred in connection with the replacement of
any defective equipment warranted hereunder, or any other indirect damages with respect to loss of revenues or
profits. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above
limitation or exclusion may not apply to you.
This document constitutes the warranty in its entirety and no other provisions express or implied exist. This
includes, without limitation, any implied warranties of merchantability and fitness of a particular purpose. Any
modifications of this warranty must be in writing and signed by an officer of the company. No other person, agent,
or representative of The Company has any authority to change or modify this warranty, either verbally or in writing.
This warranty gives you specific legal rights, and you may also have other rights, that may vary from state to state.
Because of these state laws, certain provisions of this warranty may not apply to you.
The Company reserves the right to modify or change equipment at its discretion to improve the safety, operation, or
usefulness of the product.

Page 4
BACKBOARDS:
503136 72" x 42" Rectangular Glass Backboard Lifetime Limited Warranty
503138 72" x 42" EZ Strut Glass Backboard Lifetime Limited Warranty
503139 72" x 42" Glass Conversion Backboard Lifetime Limited Warranty
503152 72" x 48" Rectangular Glass Backboard Lifetime Limited Warranty
503156 72" x 48" EZ Strut Glass Backboard Lifetime Limited Warranty
503137 54" x 40" Rectangular Glass Backboard Lifetime Limited Warranty
503140 72" x 42" Rectangular Wood Backboard 10 Year Limited Warranty
503145 72" x 42" Rectangular Fiberglass Backboard Indoor 10 Year / Outdoor 5 Year Limited Warranty
503167 72" x 42" Rectangular Steel Backboard 1 Year Limited Warranty
503150 Fan Glass Backboard 1 Year Limited Warranty
503148 Fan Fiberglass Backboard Indoor 10 Year / Outdoor 5 Year Limited Warranty
503143 Fan Aluminum Backboard with markings Lifetime Limited Warranty
503149 Fan Steel Backboard 1 Year Limited Warranty
** NOTE ** All Draper backboards are covered by a Lifetime Limited Warranty when installed on an EZ Fold Backstop with a Goal Brace direct goal attachment.
GOALS:
503040 180º Breakaway Goal 7 Year Limited Warranty
503581 Tube Tie Breakaway Goal 5 Year Limited Warranty
503576 Breakaway Goal 3 Year Limited Warranty
503572 Heavy Duty Stationary Goal 1 Year Limited Warranty
503 574 Rear Mount Stationary Goal 1 Year Limited Warranty
503578 Rear Mount Breakaway Goal 1 Year Limited Warranty
503575 Double Rim Stationary Goal – Nylon Net 1 Year Limited Warranty
503579 Double Rim Stationary Goal – Chain Net 1 Year Limited Warranty
503077 Super Playground Goal – Chain Net Unconditional Lifetime Warranty
503078 Super Playground Goal – Nylon Net Unconditional Lifetime Warranty
503079 Outdoor Breakaway Goal 1 Year Limited Warranty
** NOTE ** All goal warranties exclude nets
ACCESSORIES:
503280 / 503285 Electric Winch 5 Year Limited Warranty
503286 Manual Winch 5 Year Limited Warranty
Smart Gym Group Control System 1 Year Limited Warranty
EZ Pad Plus Control System 1 Year Limited Warranty
EZ Power Electronic Remote Control 1 Year Limited Warranty
503249 Portable Operator Kit 1 Year Limited Warranty
503229 Aut-O-Loc Safety Strap 5 Year Limited Warranty
503092 / 503094 8'-10' Height Adjustment Unit 1 Year Limited Warranty
503093 Electric 8'-10' Height Adjustment Unit 1 Year Limited Warranty
503095 Electric 8'-10' Height Adjustment Unit 1 Year Limited Warranty
503096 Electric 8'-10' Height Adjustment Unit 1 Year Limited Warranty
503097 Electric 8'-10' Height Adjustment Unit 1 Year Limited Warranty
503098 Electric 8'-10' Height Adjustment Unit 1 Year Limited Warranty
503099 Electric 8'-10' Height Adjustment Unit 1 Year Limited Warranty
503103 Electric 8'-10' Height Adjustment Unit 1 Year Limited Warranty
503104 Electric 8'-10' Height Adjustment Unit 1 Year Limited Warranty
5032XX Bolt-On Edge Padding Kit 10 Year Limited Warranty
OUTDOOR BACKSTOPS (ALL MODELS) 1 Year Limited Warranty
All of the above Warranties are based on the same principles and properties as the “25 Year Limited Warranty” on the EZ Fold Basketball Backstops.
All limitations and restrictions apply.
BACKBOARDS, GOALS & ACCESSORIES WARRANTIES by