
Receive Your Bath
A)Unpack and check for damage.
After receiving your bath, please unpack and remove all covering, checking
whether there is any damages. Repack the bath if it is not being immediately
installed. It will be rejected any claim for damage if not notified in a timely
manner.
*
B) Protect your bath
*
Before commencing installation, ensure the bath is completely protected,
leave covering in place until the bathroom is complete. Scratches and cracks
incurred during installation are not covered by the warranty.
*
*
Cleaning & Maintenance:
*
*
To preserve the polished surface, after using your bath, clean with soft cloth
and warm soapy water to wash away any body oils or soap residue that forms
a ring tide mark
*
Do not use powders, pastes, crème cleaners, thinners, window cleaning prays
or dry cleaning liquid, etc
*
When coloured essentials oils are used, first test that the colour won't
stain your bath. Always add oils into a bath full of water. Never pour them
into a empty bath.
7