Drill Master 61311 Assembly instructions

!"#"$%&'(%)*+#"$*%,$-%.$$/-00)))1.,(+&(2(*"3.$14&5
65,"7%&'(%$*4.8"4,7%#'//&($%,$-%/(&9'4$#'//&($:.,(+&(2(*"3.$14&5
Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference. 19b
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Copyright© 2019 by Harbor Freight Tools®. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.

Page 2 ;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1 Item 61311
EF;6GH IJ6KFGLIM NFLMG6MFMO6E6GPJ
G,+7*%&2%O&8$*8$#
Safety ......................................................... 2
Specifications ............................................. 7
Setup .......................................................... 7
Operation .................................................... 8
Maintenance .............................................. 10
Parts List and Diagram .............................. 11
Warranty .................................................... 12
QFKMLMR%EHNSITE%FMU%U6;LMLGLIME
This is the safety alert symbol. It is used to alert you to potential
personal injury hazards. Obey all safety messages that
follow this symbol to avoid possible injury or death.
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
Addresses practices not related to personal injury.
LNJIKGFMG%EF;6GH%LM;IKNFGLIM
R*8*(,7%J&)*(%G&&7%E,2*$V%Q,(8"83#
K*,9%,77%#,2*$V%),(8"83#=%"8#$('4$"&8#=%"77'#$(,$"&8#%,89%#/*4"2"4,$"&8#%/(&W"9*9%)"$.%$."#%/&)*(%$&&71%
Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.
E,W*%,77%),(8"83#%,89%"8#$('4$"&8#%2&(%2'$'(*%(*2*(*84*1
The term “power tool” in the warnings refers to your mains-operated (corded)
power tool or battery-operated (cordless) power tool.
1. Q&(X%,(*,%#,2*$V
a. Y**/%)&(X%,(*,%47*,8%,89%)*77%7"$1%
Cluttered or dark areas invite accidents.
b. U&%8&$%&/*(,$*%/&)*(%$&&7#%"8%
*Z/7&#"W*%,$5&#/.*(*#=%#'4.%,#%"8%
$.*%/(*#*84*%&2%27,55,+7*%7"<'"9#=%
3,#*#%&(%9'#$1%Power tools create sparks
which may ignite the dust or fumes.

Page 3;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1Item 61311
EF;6GHIJ6KFGLIMNFLMG6MFMO6 E6GPJ
c. Y**/%4."79(*8%,89%+V#$,89*(#%,),V%
)."7*%&/*(,$"83%,%/&)*(%$&&71%Distractions
can cause you to lose control.
2. 67*4$("4,7%#,2*$V
a. J&)*(%$&&7%/7'3#%5'#$%5,$4.%$.*%&'$7*$1%
M*W*(%5&9"2V%$.*%/7'3%"8%,8V%),V1%U&%8&$%'#*%
,8V%,9,/$*(%/7'3#%)"$.%*,($.*9%[3(&'89*9\%
/&)*(%$&&7#1%Unmodified plugs and matching
outlets will reduce risk of electric shock.
b. FW&"9%+&9V%4&8$,4$%)"$.%*,($.*9%&(%
3(&'89*9%#'(2,4*#=%#'4.%,#%/"/*#=%
(,9",$&(#=%(,83*#%,89%(*2("3*(,$&(#1%
There is an increased risk of electric shock
if your body is earthed or grounded.
c. U&%8&$%*Z/&#*%/&)*(%$&&7#%$&%(,"8%&(%)*$%
4&89"$"&8#1%Water entering a power tool
will increase the risk of electric shock.
d. U&%8&$%,+'#*%$.*%4&(91%M*W*(%'#*%$.*%4&(9%
2&(%4,((V"83=%/'77"83%&(%'8/7'33"83%$.*%/&)*(%
$&&71%Y**/%4&(9%,),V%2(&5%.*,$=%&"7=%#.,(/%
*93*#%&(%5&W"83%/,($#1%Damaged or entangled
cords increase the risk of electric shock.
e. Q.*8%&/*(,$"83%,%/&)*(%$&&7%&'$9&&(#=%
'#*%,8%*Z$*8#"&8%4&(9%#'"$,+7*%2&(%&'$9&&(%
'#*1%Use of a cord suitable for outdoor
use reduces the risk of electric shock.
f. L2%&/*(,$"83%,%/&)*(%$&&7%"8%,%9,5/%7&4,$"&8%
"#%'8,W&"9,+7*=%'#*%,%3(&'89%2,'7$%4"(4'"$%
"8$*(('/$*(%[R;OL\%/(&$*4$*9%#'//7V1%Use of
a GFCI reduces the risk of electric shock.
3. J*(#&8,7%#,2*$V
a. E$,V%,7*($=%),$4.%).,$%V&'%,(*%9&"83%,89%
'#*%4&55&8%#*8#*%).*8%&/*(,$"83%,%
/&)*(%$&&71%U&%8&$%'#*%,%/&)*(%$&&7%)."7*%
V&'%,(*%$"(*9%&(%'89*(%$.*%"827'*84*%&2%
9('3#=%,74&.&7%&(%5*9"4,$"&81%%A moment
of inattention while operating power tools
may result in serious personal injury.
b. P#*%/*(#&8,7%/(&$*4$"W*%*<'"/5*8$1%F7),V#%
)*,(%*V*%/(&$*4$"&81%%Protective equipment
such as dust mask, non-skid safety shoes, hard
hat, or hearing protection used for appropriate
conditions will reduce personal injuries.
c. J(*W*8$%'8"8$*8$"&8,7%#$,($"831%68#'(*%
$.*%#)"$4.%"#%"8%$.*%&22?/&#"$"&8%+*2&(*%
4&88*4$"83%$&%/&)*(%#&'(4*%,890&(%
+,$$*(V%/,4X=%/"4X"83%'/%&(%4,((V"83%$.*%
$&&71%Carrying power tools with your finger
on the switch or energizing power tools that
have the switch on invites accidents.
d. K*5&W*%,8V%,9]'#$"83%X*V%&(%)(*84.%
+*2&(*%$'(8"83%$.*%/&)*(%$&&7%&81%%A wrench
or a key left attached to a rotating part of the
power tool may result in personal injury.
e. U&%8&$%&W*((*,4.1%Y**/%/(&/*(%
2&&$"83%,89%+,7,84*%,$%,77%$"5*#1 This
enables better control of the power
tool in unexpected situations.
f. U(*##%/(&/*(7V1%U&%8&$%)*,(%7&&#*%47&$."83%
&(%]*)*7(V1%Y**/%V&'(%.,"(=%47&$."83%
,89%37&W*#%,),V%2(&5%5&W"83%/,($#1%%
Loose clothes, jewelry or long hair
can be caught in moving parts.
g. L2%9*W"4*#%,(*%/(&W"9*9%2&(%$.*%4&88*4$"&8%
&2%9'#$%*Z$(,4$"&8%,89%4&77*4$"&8%
2,4"7"$"*#=%*8#'(*%$.*#*%,(*%4&88*4$*9%
,89%/(&/*(7V%'#*91%%Use of dust collection
can reduce dust-related hazards.
h. U&%8&$%7*$%2,5"7",("$V%3,"8*9%2(&5%2(*<'*8$%
'#*%&2%$&&7#%,77&)%V&'%$&%+*4&5*%
4&5/7,4*8$%,89%"38&(*%$&&7%#,2*$V%
/("84"/7*#1%%A careless action can cause
severe injury within a fraction of a second.
i. Only use safety equipment that has been
approved by an appropriate standards agency.
Unapproved safety equipment may not provide
adequate protection. Eye protection must be
ANSI-approved and breathing protection
must be NIOSH-approved for the
specific hazards in the work area.
j. Avoid unintentional starting.
Prepare to begin work before turning on the tool.
k. Do not lay the tool down until it has come to
a complete stop. Moving parts can grab the
surface and pull the tool out of your control.
l. When using a handheld power tool,
maintain a firm grip on the tool with
both hands to resist starting torque.
m. Do not leave the tool unattended when
it is plugged into an electrical outlet.
Turn off the tool, and unplug it from its
electrical outlet before leaving.
n. This product is not a toy.
Keep it out of reach of children.
o. People with pacemakers should consult their
physician(s) before use. Electromagnetic fields
in close proximity to heart pacemaker could
cause pacemaker interference or pacemaker
failure. In addition, people with pacemakers
should:
• Avoid operating alone.
• Do not use with Switch locked on.
• Properly maintain and inspect to avoid
electrical shock.
• Properly ground power cord.
Ground Fault Circuit Interrupter (GFCI)
should also be implemented – it prevents
sustained electrical shock.

Page 4 ;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1 Item 61311
EF;6GH IJ6KFGLIM NFLMG6MFMO6E6GPJ
p. The warnings, precautions, and instructions
discussed in this instruction manual cannot
cover all possible conditions and situations
that may occur. It must be understood by the
operator that common sense and caution are
factors which cannot be built into this product,
but must be supplied by the operator.
4. J&)*(%$&&7%'#*%,89%4,(*
a. U&%8&$%2&(4*%$.*%/&)*(%$&&71%P#*%$.*%4&((*4$%
/&)*(%$&&7%2&(%V&'(%,//7"4,$"&81%%The correct
power tool will do the job better and safer
at the rate for which it was designed.
b. U&%8&$%'#*%$.*%/&)*(%$&&7%"2%$.*%#)"$4.%
9&*#%8&$%$'(8%"$%&8%,89%&221%%Any power
tool that cannot be controlled with the switch
is dangerous and must be repaired.
c. U"#4&88*4$%$.*%/7'3%2(&5%$.*%/&)*(%
#&'(4*%,890&(%(*5&W*%$.*%+,$$*(V%/,4X=%
"2%9*$,4.,+7*=%2(&5%$.*%/&)*(%$&&7%+*2&(*%
5,X"83%,8V%,9]'#$5*8$#=%4.,83"83%
,44*##&("*#=%&(%#$&("83%/&)*(%$&&7#1%%
Such preventive safety measures reduce the
risk of starting the power tool accidentally.
d. E$&(*%"97*%/&)*(%$&&7#%&'$%&2%$.*%(*,4.%&2%
4."79(*8%,89%9&%8&$%,77&)%/*(#&8#%'82,5"7",(%
)"$.%$.*%/&)*(%$&&7%&(%$.*#*%"8#$('4$"&8#%
$&%&/*(,$*%$.*%/&)*(%$&&71%%Power tools are
dangerous in the hands of untrained users.
e. N,"8$,"8%/&)*(%$&&7#%,89%,44*##&("*#1%
O.*4X%2&(%5"#,7"385*8$%&(%+"89"83%&2%
5&W"83%/,($#=%+(*,X,3*%&2%/,($#%,89%,8V%
&$.*(%4&89"$"&8%$.,$%5,V%,22*4$%$.*%/&)*(%
$&&7^#%&/*(,$"&81%L2%9,5,3*9=%.,W*%$.*%/&)*(%
$&&7%(*/,"(*9%+*2&(*%'#*1%%Many accidents
are caused by poorly maintained power tools.
f. Y**/%4'$$"83%$&&7#%#.,(/%,89%47*,81%%Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
g. P#*%$.*%/&)*(%$&&7=%,44*##&("*#%,89%$&&7%+"$#%
*$41%"8%,44&(9,84*%)"$.%$.*#*%"8#$('4$"&8#=%
$,X"83%"8$&%,44&'8$%$.*%)&(X"83%4&89"$"&8#%
,89%$.*%)&(X%$&%+*%/*(2&(5*91%%Use of the
power tool for operations different from those
intended could result in a hazardous situation.
h. Y**/%.,897*#%,89%3(,#/"83%#'(2,4*#%
9(V=%47*,8%,89%2(**%2(&5%&"7%,89%3(*,#*1%%
Slippery handles and grasping surfaces
do not allow for safe handling and control
of the tool in unexpected situations.
5. E*(W"4*
a. _,W*%V&'(%/&)*(%$&&7%#*(W"4*9%+V%,%
<',7"2"*9%(*/,"(%/*(#&8%'#"83%&87V%"9*8$"4,7%
(*/7,4*5*8$%/,($#1%%This will ensure that
the safety of the power tool is maintained.
b. Maintain labels and nameplates on the tool.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
6. S*7$%#,89*(%,89%9('5%#,89*(%#,2*$V%),(8"83#
a. _&79%$.*%/&)*(%$&&7%+V%"8#'7,$*9%3("//"83%
#'(2,4*#=%+*4,'#*%$.*%#,89"83%#'(2,4*%
5,V%4&8$,4$%"$#%&)8%4&(91%Cutting a
“live” wire may make exposed metal
parts of the power tool “live” and could
give the operator an electric shock.
7. !"+(,$"&8%E,2*$V
This tool vibrates during use.
Repeated or long-term exposure to vibration may
cause temporary or permanent physical injury,
particularly to the hands, arms and shoulders.
To reduce the risk of vibration-related injury:
a. Anyone using vibrating tools regularly or for
an extended period should first be examined
by a doctor and then have regular medical
check-ups to ensure medical problems are not
being caused or worsened from use. Pregnant
women or people who have impaired blood
circulation to the hand, past hand injuries,
nervous system disorders, diabetes, or
Raynaud’s Disease should not use this tool.
If you feel any symptoms related to
vibration (such as tingling, numbness,
and white or blue fingers), seek medical
advice as soon as possible.
b. Do not smoke during use. Nicotine reduces
the blood supply to the hands and fingers,
increasing the risk of vibration-related injury.
c. Wear suitable gloves to reduce the
vibration effects on the user.
d. Use tools with the lowest vibration
when there is a choice.
e. Include vibration-free periods each day of work.
f. Grip tool as lightly as possible (while still keeping
safe control of it). Let the tool do the work.
g. To reduce vibration, maintain the tool as
explained in this manual. If any abnormal
vibration occurs, stop use immediately.
%EF!6%G_6E6%LMEGKPOGLIME1

Page 5;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1Item 61311
EF;6GHIJ6KFGLIMNFLMG6MFMO6 E6GPJ
R(&'89"83
GI%JK6!6MG%6T6OGKLO%E_IOY%FMU%U6FG_%;KIN%
LMOIKK6OG%RKIPMULMR%QLK6%OIMM6OGLIM-%
O.*4X%)"$.%,%<',7"2"*9%*7*4$("4",8%"2%V&'%,(*%"8%9&'+$%,#%$&%).*$.*(%$.*%&'$7*$%"#%/(&/*(7V%
3(&'89*91%%U&%8&$%5&9"2V%$.*%/&)*(%4&(9%/7'3%/(&W"9*9%)"$.%$.*%$&&71%%M*W*(%(*5&W*%$.*%
3(&'89"83%/(&83%2(&5%$.*%/7'31%%U&%8&$%'#*%$.*%$&&7%"2%$.*%/&)*(%4&(9%&(%/7'3%"#%9,5,3*91%%L2%9,5,3*9=%
.,W*%"$%(*/,"(*9%+V%,%#*(W"4*%2,4"7"$V%+*2&(*%'#*1%%L2%$.*%/7'3%)"77%8&$%2"$%$.*%&'$7*$=%.,W*%,%/(&/*(%&'$7*$%
"8#$,77*9%+V%,%<',7"2"*9%*7*4$("4",81
R(&'89*9%G&&7#-%G&&7#%)"$.%G.(**%J(&83%J7'3#
`?J(&83%J7'3%,89%I'$7*$
1. Tools marked with “Grounding Required” have
a three wire cord and three prong grounding
plug. The plug must be connected to a properly
grounded outlet. If the tool should electrically
malfunction or break down, grounding provides
a low resistance path to carry electricity
away from the user, reducing the risk of
electric shock. [E**%`?J(&83%J7'3%,89%I'$7*$1\
2. The grounding prong in the plug is connected
through the green wire inside the cord to the
grounding system in the tool. The green wire
in the cord must be the only wire connected to
the tool’s grounding system and must never
be attached to an electrically “live” terminal.
[E**%`?J(&83%J7'3%,89%I'$7*$1\
3. The tool must be plugged into an appropriate outlet,
properly installed and grounded in accordance
with all codes and ordinances. The plug and outlet
should look like those in the preceding illustration.
[E**%`?J(&83%J7'3%,89%I'$7*$1\
U&'+7*%L8#'7,$*9%G&&7#-%G&&7#%)"$.%G)&%J(&83%J7'3#
I'$7*$#%2&(%a?J(&83%J7'3
1. Tools marked “Double Insulated” do not
require grounding. They have a special
double insulation system which satisfies
OSHA requirements and complies with
the applicable standards of Underwriters
Laboratories, Inc., the Canadian Standard
Association, and the National Electrical Code.
2. Double insulated tools may be used in either of the
120 volt outlets shown in the preceding illustration.%%%
[E**%I'$7*$#%2&(%a?J(&83%J7'31\
6Z$*8#"&8%O&(9#
1. Grounded tools require a three
wire extension cord. Double Insulated tools can
use either a two or three wire extension cord.
2. As the distance from the supply outlet increases,
you must use a heavier gauge extension cord.
Using extension cords with inadequately sized wire
causes a serious drop in voltage, resulting in loss
of power and possible tool damage. [E**%G,+7*%F1\
3. The smaller the gauge number of the wire, the
greater the capacity of the cord. For example,
a 14 gauge cord can carry a higher current
than a 16 gauge cord. [E**%G,+7*%F1\
4. When using more than one extension cord
to make up the total length, make sure
each cord contains at least the minimum
wire size required. [E**%G,+7*%F1\

Page 6 ;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1 Item 61311
EF;6GH IJ6KFGLIM NFLMG6MFMO6E6GPJ
5. If you are using one extension cord for more
than one tool, add the nameplate%amperes
and use the sum to determine the required
minimum cord size. [E**%G,+7*%F1\
6. If you are using an extension cord outdoors, make
sure it is marked with the suffix “W-A” (“W” in
Canada) to indicate it is acceptable for outdoor use.
7. Make sure the extension cord is properly wired
and in good electrical condition. Always replace
a damaged extension cord or have it repaired
by a qualified electrician before using it.
8. Protect the extension cords from sharp objects,
excessive heat, and damp or wet areas.
GFST6%F-%%K6OINN6MU6U%NLMLNPN%QLK6%
RFPR6%;IK%6bG6MELIM%OIKUEc%[>ad0aed%!ITG\
MFN6JTFG6
FNJ6K6E
[,$%2'77%7&,9\
6bG6MELIM%OIKU%
T6MRG_
aBf Bdf CBf >ddf >Bdf
0 – 2.0 18 18 18 18 16
2.1 – 3.4 18 18 18 16 14
3.5 – 5.0 18 18 16 14 12
5.1 – 7.0 18 16 14 12 12
7.1 – 12.0 18 14 12 10 -
12.1 – 16.0 14 12 10 - -
16.1 – 20.0 12 10 - - -
c%S,#*9%&8%7"5"$"83%$.*%7"8*%W&7$,3*%9(&/%$&%2"W*%W&7$#%,$%
>Bdg%&2%$.*%(,$*9%,5/*(*#1
EV5+&7&3V
Double Insulated
!Volts
hAlternating Current
FAmperes
n0 xxxx/min. No Load Revolutions
per Minute (RPM)
WARNING marking concerning Risk
of Eye Injury. Wear ANSI-approved
safety goggles with side shields.
Read the manual before
set-up and/or use.
WARNING marking
concerning Risk of Fire.
Do not cover ventilation ducts.
Keep flammable objects away.
WARNING marking concerning
Risk of Electric Shock.
Properly connect power cord
to appropriate outlet.

Page 7;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1Item 61311
EF;6GHIJ6KFGLIMNFLMG6MFMO6 E6GPJ
E/*4"2"4,$"&8#
Electrical Rating 120VAC / 60Hz / 1A
No Load Speed 12,000 OPM
Sandpaper Pad 4″ W x 4-1/2″ L
Dust Chute 1-1/4″ OD
E*$'/%?%S*2&(*%P#*-
%K*,9%$.*%6MGLK6%LNJIKGFMG%EF;6GH%LM;IKNFGLIM%#*4$"&8%,$%$.*%+*3"88"83%&2%$."#%
5,8',7%"847'9"83%,77%$*Z$%'89*(%#'+.*,9"83#%$.*(*"8%+*2&(*%#*$%'/%&(%'#*%&2%$."#%/(&9'4$1
GI%JK6!6MG%E6KLIPE%LMiPKH%;KIN%FOOLU6MGFT%IJ6KFGLIM-%
N,X*%#'(*%$.,$%$.*%E)"$4.%"#%"8%$.*%&22?/&#"$"&8%,89%'8/7'3%$.*%$&&7%2(&5%"$#%
*7*4$("4,7%&'$7*$%+*2&(*%,##*5+7"83%&(%5,X"83%,8V%,9]'#$5*8$#%$&%$.*%$&&71
M&$*- For additional information regarding the parts listed in the
following pages, refer to Parts List and Diagram on page 11.
F##*5+7V
U'#$%O&77*4$"&8%E*$'/
1. Turn the Dust Chute so that the tab on top of the
rectangular end faces up. Snap it in place into
the rectangular shaft at the back of the Sander.
2. Connect a 1-1/2″ dust collection hose from
the Dust Chute to your dust collection
system (hose and system not included).
Use the Dust Connector (if needed).
3. The Dust Chute will only work if the sandpaper
has holes that line up with the 6 dust collection
holes in the Backing Pad. (There are 4 other
holes in the Backing Pad for screws.)
;'84$"&8#
O7,5/
U'#$%O.'$*
J&)*(%O&(9
E)"$4.
S,4X"83%
J,9

Page 8 ;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1 Item 61311
EF;6GH IJ6KFGLIM NFLMG6MFMO6E6GPJ
I/*(,$"83%L8#$('4$"&8#
%K*,9%$.*%6MGLK6%LNJIKGFMG%EF;6GH%LM;IKNFGLIM%#*4$"&8%,$%$.*%+*3"88"83%&2%$."#%
5,8',7%"847'9"83%,77%$*Z$%'89*(%#'+.*,9"83#%$.*(*"8%+*2&(*%#*$%'/%&(%'#*%&2%$."#%/(&9'4$1
G&&7%E*$'/
GI%JK6!6MG%E6KLIPE%LMiPKH%;KIN%FOOLU6MGFT%IJ6KFGLIM-%
N,X*%#'(*%$.,$%$.*%E)"$4.%"#%"8%$.*%&22?/&#"$"&8%,89%'8/7'3%$.*%$&&7%2(&5%"$#%
*7*4$("4,7%&'$7*$%+*2&(*%/*(2&(5"83%,8V%/(&4*9'(*%"8%$."#%#*4$"&81
F$$,4."83%E,89/,/*(%$&%$.*%S,4X"83%J,9
1. Press the tab on the Clamps inward on both
sides of the unit and swing the clamps on both
sides up, out, and down. See >%j%a, right.
2. Cut the sandpaper to fit the 4″ W x 4-1/2″ L Pad,
with a little extra to overlap and fit under the
Clamps. U&%8&$%'#*%$&(8%&(%2(,V*9%#,89/,/*(1
3. After wrapping the overlapped edges
of sandpaper under the Clamps, snap
the Clamps back into place.
E,89/,/*(%3&*#%
'89*(%.*(*1
Q&(X/"*4*%,89%Q&(X%F(*,%E*$%P/
1. Workpiece selection:
a. Workpiece must be free of foreign objects.
b. Wear a NIOSH-approved respirator and
have appropriate ventilation whenever
sanding pressure treated lumber.
2. Designate a work area that is clean and well lit.
The work area must not allow access by children
or pets to prevent distraction and injury.
3. Route the power cord along a safe route to reach
the work area without creating a tripping hazard or
exposing the power cord to possible damage. The
power cord must reach the work area with enough
extra length to allow free movement while working.
4. Secure loose workpieces using a vise or clamps
(not included) to prevent movement while working.
5. There must not be objects, such as utility lines,
nearby that will present a hazard while working.

Page 9;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1Item 61311
EF;6GHIJ6KFGLIMNFLMG6MFMO6 E6GPJ
R*8*(,7%I/*(,$"83%L8#$('4$"&8#
1. Make sure that the Switch is in the
off-position, then plug in the tool.
2. Turn on the Switch.
3. Run the Sander for a few seconds
before contacting the workpiece.
4. Contact the workpiece with minimal pressure.
Use sandpaper with a lower grit number
to remove material faster.
M&$*- All orbital sanders leave sanding marks
on the workpiece. To minimize sanding marks,
always try to sand with the grain of the wood.
5. Occasionally check the sandpaper for tears,
wear, or fraying. Replace if necessary.
QFKMLMRk The tool will restart automatically if stalled.
6. To prevent accidents, turn off the tool and
unplug it after use. Clean, then store the
tool indoors out of children’s reach.

Page 10 ;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1 Item 61311
EF;6GH IJ6KFGLIM NFLMG6MFMO6E6GPJ
N,"8$*8,84*%,89%E*(W"4"83%L8#$('4$"&8#
%J(&4*9'(*#%8&$%#/*4"2"4,77V%*Z/7,"8*9%"8%$."#%5,8',7%5'#$%
+*%/*(2&(5*9%&87V%+V%,%<',7"2"*9%$*4.8"4",81
GI%JK6!6MG%E6KLIPE%LMiPKH%;KIN%FOOLU6MGFT%IJ6KFGLIM-%
N,X*%#'(*%$.,$%$.*%E)"$4.%"#%"8%$.*%&22?/&#"$"&8%,89%'8/7'3%$.*%$&&7%2(&5%"$#%
*7*4$("4,7%&'$7*$%+*2&(*%/*(2&(5"83%,8V%/(&4*9'(*%"8%$."#%#*4$"&81
GI%JK6!6MG%E6KLIPE%LMiPKH%;KIN%GIIT%;FLTPK6-%
U&%8&$%'#*%9,5,3*9%*<'"/5*8$1%%L2%,+8&(5,7%8&"#*%&(%W"+(,$"&8%
&44'(#=%.,W*%$.*%/(&+7*5%4&((*4$*9%+*2&(*%2'($.*(%'#*1
O7*,8"83=%N,"8$*8,84*=%,89%T'+("4,$"&8
1. S6;IK6%6FO_%PE6= inspect the general
condition of the tool. Check for:
• loose hardware,
• misalignment or binding of moving parts,
• cracked or broken parts,
• damaged electrical wiring, and
• any other condition that may
affect its safe operation.
2. F;G6K%PE6= wipe external surfaces
of the tool with clean cloth.
3. Make sure the vents on the top are
clear of dust and debris.
4. QFKMLMRk%%L2%$.*%/7'3%&(%$.*%#'//7V%4&(9%
&2%$."#%/&)*(%$&&7%"#%9,5,3*9=%"$%5'#$%+*%
(*/7,4*9%&87V%+V%,%<',7"2"*9%#*(W"4*%$*4.8"4",81
JT6FE6%K6FU%G_6%;ITTIQLMR%OFK6;PTTH
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM
IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR
MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS
QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE
ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY
STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND
LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY
ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS
THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
K*4&(9%J(&9'4$^#%E*(",7%M'5+*(%_*(*-%
M&$*-%L2%/(&9'4$%.,#%8&%#*(",7%8'5+*(=%(*4&(9%5&8$.%,89%V*,(%&2%/'(4.,#*%"8#$*,91
M&$*- Some parts are listed and shown for illustration purposes only,
and are not available individually as replacement parts.

Page 11;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1Item 61311
EF;6GHIJ6KFGLIMNFLMG6MFMO6 E6GPJ
J,($#%T"#$%,89%U",3(,5
J,($ U*#4("/$"&8 l$V
1 Right Housing 1
2 Left Housing 2
3 Bearing 1
4 Stator 1
5 Fan 1
6 Bearing 607 1
7 Aluminum Fan 1
8 Oscillating Bracket 2
J,($ U*#4("/$"&8 l$V
9 Backing Pad 1
10 Cord Sleeve 1
11 Dust Port 1
12 Dust Chute 1
13 Dust Connector 1
14 Switch 1
15 Rotor 1
16 Power Cord (not shown) 1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15

aABe>%F3&'(,%K&,9%%m%%O,7,+,#,#=%OF%D>`da%%m%%>?@@@?@AA?BCDC
T"5"$*9%Dd%U,V%Q,((,8$V
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability
standards, and warrants to the original purchaser that this product is free from defects in materials
and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to
damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside
our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance.
We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent,
special or consequential damages arising from the use of our product. Some states do not allow the
exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion
may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us with transportation charges
prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise.
If our inspection verifies the defect, we will either repair or replace the product at our election or we may
elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will
return repaired products at our expense, but if we determine there is no defect, or that the defect resulted
from causes not within the scope of our warranty, then you must bear the cost of returning the product.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.