DryGuy Thermanator DG2 User manual
DryGuy.com September 2012
DryGuy™Thermanator™ DG2
Silent Boot, Shoe and Glove Dryer
INSTRUCTION MANUAL
BEFORE RETURNING THIS PRODUCT
FOR ANY REASON PLEASE CALL
1-888-330-9452
IF YOU SHOULD HAVE A QUESTION OR EXPERIENCE
A PROBLEM WITH YOUR DryGuy™PRODUCT
CALL 1-888-330-9452
Before you call, please have the following information available: Product MODEL number which is located below the UPC code on the
outside of the product box and the store receipt with purchase date. In most cases, a DryGuy™representative can resolve the problem
over the phone or via email and if not, can direct you to an authorized service center. If you have suggestions or comments, please send
them via email to: info@dryguy.net. Your feedback is vital to DryGuy™.
SAVE THIS MANUAL FOR FUTURE REFERENCE
IMPORTANT:
To assure product SAFETY and RELIABILITY, repairs and maintenance (other than those listed in this manual)
should be performed by authorized service centers or other qualified service organizations, always using
identical replacement parts.
ACCESSORIES:
No recommended accessories for use with your DryGuy™ Thermanator™ are available at this time.
CAUTION: The use of any accessory or attachment not recommended
may be hazardous and may void warranty.
SERVICE INFORMATION:
DryGuy™ Service Center is staffed with trained personnel to provide customers with efficient and reliable
product service. Whether you need technical advice, repair or genuine factory replacement parts, contact
customer service at 888-330-9452.
FULL ONE (1) YEAR USE WARRANTY:
DryGuy™(U.S.) warrants this product for One (1) Year against any defects in material or workmanship. The
defective product will be replaced or repaired at no charge in either of two ways:
The first, which will result in exchanges only, is to return the product to the retailer from whom it was
purchased (provided the store is a participating retailer). Returns should be made within the time period
of the retailer’s policy for exchanges (usually 30 days after the sale). Proof of purchase may be required.
Please check with the retailer for their specific return policy regarding returns. The second option is to
take or send the product (prepaid) to a DryGuy™authorized service center for repair or replacement at our
discretion. Proof of purchase, store name and date of purchase may be required.
This warranty does not apply to accessories. This warranty gives you specific legal rights and you may have
other rights which vary from state to state. Should you have any questions, contact the service center. This
product is not intended for commercial use.
THE FOLLOWING WILL NOT BE COVERED UNDER WARRANTY:
- Any modification to DryGuy™Thermanator™
- Product has been misused or improperly cared for
- Products over One (1) Year from date of original purchase
- Warranty request without original receipt
- Repairs done by anyone other than DryGuy™or a DryGuy™authorized repair facility
In consideration of the above promises by DryGuy™, the buyer agrees to and accepts the following conditions:
1. That this warranty is in lieu of all other warranties, expressed or implied.
2. That all warranties OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
EXCLUDED OR WAIVED.
3. That the buyer’s sole remedy shall be to obtain replacement of the product free of charge from
DryGuy™provided any and all warranty defects falls within the warranty period and meets all warranty
provisions.
4. That this remedy is in lieu of all other remedies or claims for damages, consequential or otherwise,
which the buyer may have against DryGuy™.
DryGuy.com
GENERAL SAFETY RULES
WARNING! READ AND UNDERSTAND ALL INSTRUCTIONS.
Failure to follow all instructions listed may result in electric shock, fire and/or serious personal injury.
SAVE THESE INSTRUCTIONS
AREA OF USE:
• Keepsurroundingareacleanandwelllit.Clutteredareasinviteaccidents.
• DoNOToperateinexplosiveatmospheres,suchasinthepresenceofammableliquids,gasesordust.
ELECTRICAL SAFETY:
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric
shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in
the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do NOT modify the
plug in any way.
• DoNOToperateinstandingwater.
• DoNOToverloadwithgarments.
• DoNOTcut-offorrestrictaircirculation.
• DoNOTexposeDryGuy™Thermanator™to rain or snow.
• UseofattachmentsnotrecommendedorsoldbyDryGuy™may result in a risk of fire, electric shock,
or injury to persons.
• Toreduceriskofdamagetoelectricplugandcord,pullbyplugratherthancordwhendisconnectingunit.
• Makesurethecordispositionedsothatitwillnotbesteppedon,trippedoverorotherwisesubjected
to damage or stress.
• Anextensioncordshouldnotbeusedunlessabsolutelynecessary.Useofimproperextensioncord
could result in a risk of fire, electric shock or electrocution.
• Two-wirecordscanbeusedwith2-wireor3-wireextensioncords.Onlyroundjacketedextension
cords should be used and we recommend that they be listed by Underwriters Laboratories (U.L.). If the
extension cord is to be used outside, it must be suitable for outdoor use. Any cord marked for outdoor
use can also be used for indoor use. The letters “W” or “WA” on the cord jacket indicate that the cord is
suitable for outdoor use.
• Anextension cordmusthaveadequate wiresize(AWGorAmericanWireGauge)forsafetyandto
prevent loss of power and overheating. The smaller the gauge number of the wire, the greater the
capacity of the cable; that is, 16 gauge has more capacity than 18 gauge. When using more than 1
extension to make up the total length, be sure each extension contains at least the minimum wire size.
ANNOUNCEMENT:
• TheDryGuy™Thermanator™only heats to a gentle temperature. It is not designed to generate high heat
as this would damage footwear.
OPERATING INSTRUCTIONS:
1. Plug the DryGuy™Thermanator™into any standard 120 Volt 60 Hz electrical outlet.
2. The DryGuy™Thermanator™dries two pair of ski boots simultaneously, ski boots and ski gloves
simultaneously, or snowboard boots and gloves simultaneously. It also dries other types of footwear:
hiking, golf, basketball, soccer and all other cleated and athletic shoes. The DryGuy™Thermanator™
dries children’s shoes and mittens as well.
3.Carefullyslidefootwear,skiboots,orglovesontodryingtubes,beingcarefulnottorestrictairow.
HELPFUL TIPS:
1. Do not place shoes on drying tubes if they are dripping wet as they may drain water on the power
cord, creating a potential hazard. Remove as much water as possible before placing on the DryGuy™
Thermanator™drying tubes.
2. When placing gloves, mittens, children’s boots or shoes onto the drying tubes, be sure not to block or
pinch air circulation.
3. We recommend all footwear be dried after every use to help prevent bacteria and fungus which is, the
primary cause of odor.
4. Smaller footwear and garments will dry quicker than larger items.
5. Your Eco-Friendly energy efficient DryGuy™Thermanator™heats to a gentle temperature using radiant
heat to quietly and quickly dry wet garments. At first you may suspect the unit is not operating properly.
We recommend you place the back of your hand near the drying tube so you will feel the gentle
warmth.
OPERATION TIME:
• Dryingtimevariesdependingupontemperature,humidity,sizeoffootwearandgarmentsandextent
of moisture.
• Wenormallyrecommendaminimumof1hourdryingtimeeverytimeyourbootsareused.
• Whileinoperation,theunitisrelativelyquietandproducesminimalnoise.Thisisnormalanddoesnot
indicate a problem.
MAINTENANCE:
Use only mild soap and a damp cloth to clean the DryGuy™Thermanator™. Never immerse any part of unit
into liquid.
LIST OF COMPONENTS
•DryGuy™Thermanator™with power cord – 1 piece
•Stands–1piece
•Plasticsaddleclampswithselflockingnuts–2sets
•Hexwrench–1piece
•1”screws–4pieces
•2”screws–6pieces
•Plasticwallanchor–4pieces
•Wallmountingbrackets–2pieces
•Screwcover–4pieces
ASSEMBLY AND MOUNTING INSTRUCTIONS
SELF STANDING INSTRUCTIONS:
• Locatethetwostands,twoplasticsaddleclampsandthetwoselflockingnuts.
• Placetheuppersaddlesoverthetopofthemainmetaltube,asillustrated,andpushtheboltsthrough
the lower saddle clamp, pinning the main metal tube in-between.
• Guidethestandsontoeachsetofboltsasillustrated(SeeFig.1)andsemi-tightenthefourself-locking
nuts.
• Positionthestandsothetoeofthebootorshoeisthehighestpoint.
• AdjustDryGuy™Thermanator™as necessary to an upright position.
• Firmlytightenthefourselflockingnutswithhexwrenchwhichisprovided.
WALL MOUNTING INSTRUCTIONS:
• Wallmountinstallationdoesnotrequirestands.
• Locatethetwoplasticsaddleclamps,twoselflockingnutsandtwometalwall-mountbrackets.
• Placetheuppersaddlesoverthetopofthemainmetaltube,asillustrated,andpushtheboltsthrough
the lower saddle clamp, pinning the main metal tube in-between.
• Guidethewall-mountbracketsontotheboltsandsemi-tightenthefourselflockingnuts.
• PlacetheDryGuy™Thermanator™against the wall (power cord on left) and adjust the wall-mounting
brackets to 16” on center (common distance between wall studs) and level contact with the wall.
• Further adjust DryGuy™Thermanator™so drying tubes are approximately 11” to 12” away from
the wall. Securely tighten the four self locking nuts, making sure not to move saddle clamps out of
alignment.
• Withsaddleclampssecurelytightened,locatewallstudsandmeasureupfromtheoortoadesired
level, mark the wall where you want to mount the unit, making sure you have found the wall studs
and pre-drill screw holes with the appropriate size drill bit (If wall stud spacing is not appropriate for
proper mounting, insert the suitable size molly bolt for hollow walls following molly bolt manufacturer’s
instructions).
• Placeclearscrewcapcoverwasherontoscrews(SeeFig.3)andsecurelyscrewcompletedDryGuy™
Thermanator™assembly into pre-drilled holes in the wall or molly bolts.
• Whencompleteandsecure,pushwhitenishplasticcaptocoverscrews.
• Please note-When wall mounting DryGuy™Thermanator™(See Fig. 2) face unit so power cord is
positioned on the left, not on the right (as pictured on package).When mounting DryGuy™Thermanator™
in multiple tiers, allow a minimum of 18” between the main horizontal metal tubes.
IN-LINE SWITCH INDICATION:
• Switchcanbepresseddownfromeitherside,asshown(SeeFig.4).Donotopenswitch.Keepswitch
away from water.
• PressknobdowntoturnontheDryGuy™Thermanator™, press knob down to turn off (See Fig. 4).
DryGuy.com DryGuy.com
Fig 4
Fig 3
Fig 2
Fig 1
GENERAL SAFETY RULES
WARNING! READ AND UNDERSTAND ALL INSTRUCTIONS.
Failure to follow all instructions listed may result in electric shock, fire and/or serious personal injury.
SAVE THESE INSTRUCTIONS
AREA OF USE:
• Keepsurroundingareacleanandwelllit.Clutteredareasinviteaccidents.
• DoNOToperateinexplosiveatmospheres,suchasinthepresenceofammableliquids,gasesordust.
ELECTRICAL SAFETY:
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric
shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in
the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do NOT modify the
plug in any way.
• DoNOToperateinstandingwater.
• DoNOToverloadwithgarments.
• DoNOTcut-offorrestrictaircirculation.
• DoNOTexposeDryGuy™Thermanator™to rain or snow.
• UseofattachmentsnotrecommendedorsoldbyDryGuy™may result in a risk of fire, electric shock,
or injury to persons.
• Toreduceriskofdamagetoelectricplugandcord,pullbyplugratherthancordwhendisconnectingunit.
• Makesurethecordispositionedsothatitwillnotbesteppedon,trippedoverorotherwisesubjected
to damage or stress.
• Anextensioncordshouldnotbeusedunlessabsolutelynecessary.Useofimproperextensioncord
could result in a risk of fire, electric shock or electrocution.
• Two-wirecordscanbeusedwith2-wireor3-wireextensioncords.Onlyroundjacketedextension
cords should be used and we recommend that they be listed by Underwriters Laboratories (U.L.). If the
extension cord is to be used outside, it must be suitable for outdoor use. Any cord marked for outdoor
use can also be used for indoor use. The letters “W” or “WA” on the cord jacket indicate that the cord is
suitable for outdoor use.
• Anextension cordmusthaveadequate wiresize(AWGorAmericanWireGauge)forsafetyandto
prevent loss of power and overheating. The smaller the gauge number of the wire, the greater the
capacity of the cable; that is, 16 gauge has more capacity than 18 gauge. When using more than 1
extension to make up the total length, be sure each extension contains at least the minimum wire size.
ANNOUNCEMENT:
• TheDryGuy™Thermanator™only heats to a gentle temperature. It is not designed to generate high heat
as this would damage footwear.
OPERATING INSTRUCTIONS:
1. Plug the DryGuy™Thermanator™into any standard 120 Volt 60 Hz electrical outlet.
2. The DryGuy™Thermanator™dries two pair of ski boots simultaneously, ski boots and ski gloves
simultaneously, or snowboard boots and gloves simultaneously. It also dries other types of footwear:
hiking, golf, basketball, soccer and all other cleated and athletic shoes. The DryGuy™Thermanator™
dries children’s shoes and mittens as well.
3.Carefullyslidefootwear,skiboots,orglovesontodryingtubes,beingcarefulnottorestrictairow.
HELPFUL TIPS:
1. Do not place shoes on drying tubes if they are dripping wet as they may drain water on the power
cord, creating a potential hazard. Remove as much water as possible before placing on the DryGuy™
Thermanator™drying tubes.
2. When placing gloves, mittens, children’s boots or shoes onto the drying tubes, be sure not to block or
pinch air circulation.
3. We recommend all footwear be dried after every use to help prevent bacteria and fungus which is, the
primary cause of odor.
4. Smaller footwear and garments will dry quicker than larger items.
5. Your Eco-Friendly energy efficient DryGuy™Thermanator™heats to a gentle temperature using radiant
heat to quietly and quickly dry wet garments. At first you may suspect the unit is not operating properly.
We recommend you place the back of your hand near the drying tube so you will feel the gentle
warmth.
OPERATION TIME:
• Dryingtimevariesdependingupontemperature,humidity,sizeoffootwearandgarmentsandextent
of moisture.
• Wenormallyrecommendaminimumof1hourdryingtimeeverytimeyourbootsareused.
• Whileinoperation,theunitisrelativelyquietandproducesminimalnoise.Thisisnormalanddoesnot
indicate a problem.
MAINTENANCE:
Use only mild soap and a damp cloth to clean the DryGuy™Thermanator™. Never immerse any part of unit
into liquid.
LIST OF COMPONENTS
•DryGuy™Thermanator™with power cord – 1 piece
•Stands–1piece
•Plasticsaddleclampswithselflockingnuts–2sets
•Hexwrench–1piece
•1”screws–4pieces
•2”screws–6pieces
•Plasticwallanchor–4pieces
•Wallmountingbrackets–2pieces
•Screwcover–4pieces
ASSEMBLY AND MOUNTING INSTRUCTIONS
SELF STANDING INSTRUCTIONS:
• Locatethetwostands,twoplasticsaddleclampsandthetwoselflockingnuts.
• Placetheuppersaddlesoverthetopofthemainmetaltube,asillustrated,andpushtheboltsthrough
the lower saddle clamp, pinning the main metal tube in-between.
• Guidethestandsontoeachsetofboltsasillustrated(SeeFig.1)andsemi-tightenthefourself-locking
nuts.
• Positionthestandsothetoeofthebootorshoeisthehighestpoint.
• AdjustDryGuy™Thermanator™as necessary to an upright position.
• Firmlytightenthefourselflockingnutswithhexwrenchwhichisprovided.
WALL MOUNTING INSTRUCTIONS:
• Wallmountinstallationdoesnotrequirestands.
• Locatethetwoplasticsaddleclamps,twoselflockingnutsandtwometalwall-mountbrackets.
• Placetheuppersaddlesoverthetopofthemainmetaltube,asillustrated,andpushtheboltsthrough
the lower saddle clamp, pinning the main metal tube in-between.
• Guidethewall-mountbracketsontotheboltsandsemi-tightenthefourselflockingnuts.
• PlacetheDryGuy™Thermanator™against the wall (power cord on left) and adjust the wall-mounting
brackets to 16” on center (common distance between wall studs) and level contact with the wall.
• Further adjust DryGuy™Thermanator™so drying tubes are approximately 11” to 12” away from
the wall. Securely tighten the four self locking nuts, making sure not to move saddle clamps out of
alignment.
• Withsaddleclampssecurelytightened,locatewallstudsandmeasureupfromtheoortoadesired
level, mark the wall where you want to mount the unit, making sure you have found the wall studs
and pre-drill screw holes with the appropriate size drill bit (If wall stud spacing is not appropriate for
proper mounting, insert the suitable size molly bolt for hollow walls following molly bolt manufacturer’s
instructions).
• Placeclearscrewcapcoverwasherontoscrews(SeeFig.3)andsecurelyscrewcompletedDryGuy™
Thermanator™assembly into pre-drilled holes in the wall or molly bolts.
• Whencompleteandsecure,pushwhitenishplasticcaptocoverscrews.
• Please note-When wall mounting DryGuy™Thermanator™(See Fig. 2) face unit so power cord is
positioned on the left, not on the right (as pictured on package).When mounting DryGuy™Thermanator™
in multiple tiers, allow a minimum of 18” between the main horizontal metal tubes.
IN-LINE SWITCH INDICATION:
• Switchcanbepresseddownfromeitherside,asshown(SeeFig.4).Donotopenswitch.Keepswitch
away from water.
• PressknobdowntoturnontheDryGuy™Thermanator™, press knob down to turn off (See Fig. 4).
DryGuy.com DryGuy.com
Fig 4
Fig 3
Fig 2
Fig 1
DryGuy.com September 2012
DryGuy™Thermanator™ DG2
Silent Boot, Shoe and Glove Dryer
INSTRUCTION MANUAL
BEFORE RETURNING THIS PRODUCT
FOR ANY REASON PLEASE CALL
1-888-330-9452
IF YOU SHOULD HAVE A QUESTION OR EXPERIENCE
A PROBLEM WITH YOUR DryGuy™PRODUCT
CALL 1-888-330-9452
Before you call, please have the following information available: Product MODEL number which is located below the UPC code on the
outside of the product box and the store receipt with purchase date. In most cases, a DryGuy™representative can resolve the problem
over the phone or via email and if not, can direct you to an authorized service center. If you have suggestions or comments, please send
them via email to: info@dryguy.net. Your feedback is vital to DryGuy™.
SAVE THIS MANUAL FOR FUTURE REFERENCE
IMPORTANT:
To assure product SAFETY and RELIABILITY, repairs and maintenance (other than those listed in this manual)
should be performed by authorized service centers or other qualified service organizations, always using
identical replacement parts.
ACCESSORIES:
No recommended accessories for use with your DryGuy™ Thermanator™ are available at this time.
CAUTION: The use of any accessory or attachment not recommended
may be hazardous and may void warranty.
SERVICE INFORMATION:
DryGuy™ Service Center is staffed with trained personnel to provide customers with efficient and reliable
product service. Whether you need technical advice, repair or genuine factory replacement parts, contact
customer service at 888-330-9452.
FULL ONE (1) YEAR USE WARRANTY:
DryGuy™(U.S.) warrants this product for One (1) Year against any defects in material or workmanship. The
defective product will be replaced or repaired at no charge in either of two ways:
The first, which will result in exchanges only, is to return the product to the retailer from whom it was
purchased (provided the store is a participating retailer). Returns should be made within the time period
of the retailer’s policy for exchanges (usually 30 days after the sale). Proof of purchase may be required.
Please check with the retailer for their specific return policy regarding returns. The second option is to
take or send the product (prepaid) to a DryGuy™authorized service center for repair or replacement at our
discretion. Proof of purchase, store name and date of purchase may be required.
This warranty does not apply to accessories. This warranty gives you specific legal rights and you may have
other rights which vary from state to state. Should you have any questions, contact the service center. This
product is not intended for commercial use.
THE FOLLOWING WILL NOT BE COVERED UNDER WARRANTY:
- Any modification to DryGuy™Thermanator™
- Product has been misused or improperly cared for
- Products over One (1) Year from date of original purchase
- Warranty request without original receipt
- Repairs done by anyone other than DryGuy™or a DryGuy™authorized repair facility
In consideration of the above promises by DryGuy™, the buyer agrees to and accepts the following conditions:
1. That this warranty is in lieu of all other warranties, expressed or implied.
2. That all warranties OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
EXCLUDED OR WAIVED.
3. That the buyer’s sole remedy shall be to obtain replacement of the product free of charge from
DryGuy™provided any and all warranty defects falls within the warranty period and meets all warranty
provisions.
4. That this remedy is in lieu of all other remedies or claims for damages, consequential or otherwise,
which the buyer may have against DryGuy™.
DryGuy.com
GENERAL SAFETY RULES
WARNING! READ AND UNDERSTAND ALL INSTRUCTIONS.
Failure to follow all instructions listed may result in electric shock, fire and/or serious personal injury.
SAVE THESE INSTRUCTIONS
AREA OF USE:
• Keepsurroundingareacleanandwelllit.Clutteredareasinviteaccidents.
• DoNOToperateinexplosiveatmospheres,suchasinthepresenceofammableliquids,gasesordust.
ELECTRICAL SAFETY:
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric
shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in
the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do NOT modify the
plug in any way.
• DoNOToperateinstandingwater.
• DoNOToverloadwithgarments.
• DoNOTcut-offorrestrictaircirculation.
• DoNOTexposeDryGuy™Thermanator™to rain or snow.
• UseofattachmentsnotrecommendedorsoldbyDryGuy™may result in a risk of fire, electric shock,
or injury to persons.
• Toreduceriskofdamagetoelectricplugandcord,pullbyplugratherthancordwhendisconnectingunit.
• Makesurethecordispositionedsothatitwillnotbesteppedon,trippedoverorotherwisesubjected
to damage or stress.
• Anextensioncordshouldnotbeusedunlessabsolutelynecessary.Useofimproperextensioncord
could result in a risk of fire, electric shock or electrocution.
• Two-wirecordscanbeusedwith2-wireor3-wireextensioncords.Onlyroundjacketedextension
cords should be used and we recommend that they be listed by Underwriters Laboratories (U.L.). If the
extension cord is to be used outside, it must be suitable for outdoor use. Any cord marked for outdoor
use can also be used for indoor use. The letters “W” or “WA” on the cord jacket indicate that the cord is
suitable for outdoor use.
• Anextension cordmusthaveadequate wiresize(AWGorAmericanWireGauge)forsafetyandto
prevent loss of power and overheating. The smaller the gauge number of the wire, the greater the
capacity of the cable; that is, 16 gauge has more capacity than 18 gauge. When using more than 1
extension to make up the total length, be sure each extension contains at least the minimum wire size.
ANNOUNCEMENT:
• TheDryGuy™Thermanator™only heats to a gentle temperature. It is not designed to generate high heat
as this would damage footwear.
OPERATING INSTRUCTIONS:
1. Plug the DryGuy™Thermanator™into any standard 120 Volt 60 Hz electrical outlet.
2. The DryGuy™Thermanator™dries two pair of ski boots simultaneously, ski boots and ski gloves
simultaneously, or snowboard boots and gloves simultaneously. It also dries other types of footwear:
hiking, golf, basketball, soccer and all other cleated and athletic shoes. The DryGuy™Thermanator™
dries children’s shoes and mittens as well.
3.Carefullyslidefootwear,skiboots,orglovesontodryingtubes,beingcarefulnottorestrictairow.
HELPFUL TIPS:
1. Do not place shoes on drying tubes if they are dripping wet as they may drain water on the power
cord, creating a potential hazard. Remove as much water as possible before placing on the DryGuy™
Thermanator™drying tubes.
2. When placing gloves, mittens, children’s boots or shoes onto the drying tubes, be sure not to block or
pinch air circulation.
3. We recommend all footwear be dried after every use to help prevent bacteria and fungus which is, the
primary cause of odor.
4. Smaller footwear and garments will dry quicker than larger items.
5. Your Eco-Friendly energy efficient DryGuy™Thermanator™heats to a gentle temperature using radiant
heat to quietly and quickly dry wet garments. At first you may suspect the unit is not operating properly.
We recommend you place the back of your hand near the drying tube so you will feel the gentle
warmth.
OPERATION TIME:
• Dryingtimevariesdependingupontemperature,humidity,sizeoffootwearandgarmentsandextent
of moisture.
• Wenormallyrecommendaminimumof1hourdryingtimeeverytimeyourbootsareused.
• Whileinoperation,theunitisrelativelyquietandproducesminimalnoise.Thisisnormalanddoesnot
indicate a problem.
MAINTENANCE:
Use only mild soap and a damp cloth to clean the DryGuy™Thermanator™. Never immerse any part of unit
into liquid.
LIST OF COMPONENTS
•DryGuy™Thermanator™with power cord – 1 piece
•Stands–1piece
•Plasticsaddleclampswithselflockingnuts–2sets
•Hexwrench–1piece
•1”screws–4pieces
•2”screws–6pieces
•Plasticwallanchor–4pieces
•Wallmountingbrackets–2pieces
•Screwcover–4pieces
ASSEMBLY AND MOUNTING INSTRUCTIONS
SELF STANDING INSTRUCTIONS:
• Locatethetwostands,twoplasticsaddleclampsandthetwoselflockingnuts.
• Placetheuppersaddlesoverthetopofthemainmetaltube,asillustrated,andpushtheboltsthrough
the lower saddle clamp, pinning the main metal tube in-between.
• Guidethestandsontoeachsetofboltsasillustrated(SeeFig.1)andsemi-tightenthefourself-locking
nuts.
• Positionthestandsothetoeofthebootorshoeisthehighestpoint.
• AdjustDryGuy™Thermanator™as necessary to an upright position.
• Firmlytightenthefourselflockingnutswithhexwrenchwhichisprovided.
WALL MOUNTING INSTRUCTIONS:
• Wallmountinstallationdoesnotrequirestands.
• Locatethetwoplasticsaddleclamps,twoselflockingnutsandtwometalwall-mountbrackets.
• Placetheuppersaddlesoverthetopofthemainmetaltube,asillustrated,andpushtheboltsthrough
the lower saddle clamp, pinning the main metal tube in-between.
• Guidethewall-mountbracketsontotheboltsandsemi-tightenthefourselflockingnuts.
• PlacetheDryGuy™Thermanator™against the wall (power cord on left) and adjust the wall-mounting
brackets to 16” on center (common distance between wall studs) and level contact with the wall.
• Further adjust DryGuy™Thermanator™so drying tubes are approximately 11” to 12” away from
the wall. Securely tighten the four self locking nuts, making sure not to move saddle clamps out of
alignment.
• Withsaddleclampssecurelytightened,locatewallstudsandmeasureupfromtheoortoadesired
level, mark the wall where you want to mount the unit, making sure you have found the wall studs
and pre-drill screw holes with the appropriate size drill bit (If wall stud spacing is not appropriate for
proper mounting, insert the suitable size molly bolt for hollow walls following molly bolt manufacturer’s
instructions).
• Placeclearscrewcapcoverwasherontoscrews(SeeFig.3)andsecurelyscrewcompletedDryGuy™
Thermanator™assembly into pre-drilled holes in the wall or molly bolts.
• Whencompleteandsecure,pushwhitenishplasticcaptocoverscrews.
• Please note-When wall mounting DryGuy™Thermanator™(See Fig. 2) face unit so power cord is
positioned on the left, not on the right (as pictured on package).When mounting DryGuy™Thermanator™
in multiple tiers, allow a minimum of 18” between the main horizontal metal tubes.
IN-LINE SWITCH INDICATION:
• Switchcanbepresseddownfromeitherside,asshown(SeeFig.4).Donotopenswitch.Keepswitch
away from water.
• PressknobdowntoturnontheDryGuy™Thermanator™, press knob down to turn off (See Fig. 4).
DryGuy.com DryGuy.com
Fig 4
Fig 3
Fig 2
Fig 1
GENERAL SAFETY RULES
WARNING! READ AND UNDERSTAND ALL INSTRUCTIONS.
Failure to follow all instructions listed may result in electric shock, fire and/or serious personal injury.
SAVE THESE INSTRUCTIONS
AREA OF USE:
• Keepsurroundingareacleanandwelllit.Clutteredareasinviteaccidents.
• DoNOToperateinexplosiveatmospheres,suchasinthepresenceofammableliquids,gasesordust.
ELECTRICAL SAFETY:
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric
shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in
the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do NOT modify the
plug in any way.
• DoNOToperateinstandingwater.
• DoNOToverloadwithgarments.
• DoNOTcut-offorrestrictaircirculation.
• DoNOTexposeDryGuy™Thermanator™to rain or snow.
• UseofattachmentsnotrecommendedorsoldbyDryGuy™may result in a risk of fire, electric shock,
or injury to persons.
• Toreduceriskofdamagetoelectricplugandcord,pullbyplugratherthancordwhendisconnectingunit.
• Makesurethecordispositionedsothatitwillnotbesteppedon,trippedoverorotherwisesubjected
to damage or stress.
• Anextensioncordshouldnotbeusedunlessabsolutelynecessary.Useofimproperextensioncord
could result in a risk of fire, electric shock or electrocution.
• Two-wirecordscanbeusedwith2-wireor3-wireextensioncords.Onlyroundjacketedextension
cords should be used and we recommend that they be listed by Underwriters Laboratories (U.L.). If the
extension cord is to be used outside, it must be suitable for outdoor use. Any cord marked for outdoor
use can also be used for indoor use. The letters “W” or “WA” on the cord jacket indicate that the cord is
suitable for outdoor use.
• Anextension cordmusthaveadequate wiresize(AWGorAmericanWireGauge)forsafetyandto
prevent loss of power and overheating. The smaller the gauge number of the wire, the greater the
capacity of the cable; that is, 16 gauge has more capacity than 18 gauge. When using more than 1
extension to make up the total length, be sure each extension contains at least the minimum wire size.
ANNOUNCEMENT:
• TheDryGuy™Thermanator™only heats to a gentle temperature. It is not designed to generate high heat
as this would damage footwear.
OPERATING INSTRUCTIONS:
1. Plug the DryGuy™Thermanator™into any standard 120 Volt 60 Hz electrical outlet.
2. The DryGuy™Thermanator™dries two pair of ski boots simultaneously, ski boots and ski gloves
simultaneously, or snowboard boots and gloves simultaneously. It also dries other types of footwear:
hiking, golf, basketball, soccer and all other cleated and athletic shoes. The DryGuy™Thermanator™
dries children’s shoes and mittens as well.
3.Carefullyslidefootwear,skiboots,orglovesontodryingtubes,beingcarefulnottorestrictairow.
HELPFUL TIPS:
1. Do not place shoes on drying tubes if they are dripping wet as they may drain water on the power
cord, creating a potential hazard. Remove as much water as possible before placing on the DryGuy™
Thermanator™drying tubes.
2. When placing gloves, mittens, children’s boots or shoes onto the drying tubes, be sure not to block or
pinch air circulation.
3. We recommend all footwear be dried after every use to help prevent bacteria and fungus which is, the
primary cause of odor.
4. Smaller footwear and garments will dry quicker than larger items.
5. Your Eco-Friendly energy efficient DryGuy™Thermanator™heats to a gentle temperature using radiant
heat to quietly and quickly dry wet garments. At first you may suspect the unit is not operating properly.
We recommend you place the back of your hand near the drying tube so you will feel the gentle
warmth.
OPERATION TIME:
• Dryingtimevariesdependingupontemperature,humidity,sizeoffootwearandgarmentsandextent
of moisture.
• Wenormallyrecommendaminimumof1hourdryingtimeeverytimeyourbootsareused.
• Whileinoperation,theunitisrelativelyquietandproducesminimalnoise.Thisisnormalanddoesnot
indicate a problem.
MAINTENANCE:
Use only mild soap and a damp cloth to clean the DryGuy™Thermanator™. Never immerse any part of unit
into liquid.
LIST OF COMPONENTS
•DryGuy™Thermanator™with power cord – 1 piece
•Stands–1piece
•Plasticsaddleclampswithselflockingnuts–2sets
•Hexwrench–1piece
•1”screws–4pieces
•2”screws–6pieces
•Plasticwallanchor–4pieces
•Wallmountingbrackets–2pieces
•Screwcover–4pieces
ASSEMBLY AND MOUNTING INSTRUCTIONS
SELF STANDING INSTRUCTIONS:
• Locatethetwostands,twoplasticsaddleclampsandthetwoselflockingnuts.
• Placetheuppersaddlesoverthetopofthemainmetaltube,asillustrated,andpushtheboltsthrough
the lower saddle clamp, pinning the main metal tube in-between.
• Guidethestandsontoeachsetofboltsasillustrated(SeeFig.1)andsemi-tightenthefourself-locking
nuts.
• Positionthestandsothetoeofthebootorshoeisthehighestpoint.
• AdjustDryGuy™Thermanator™as necessary to an upright position.
• Firmlytightenthefourselflockingnutswithhexwrenchwhichisprovided.
WALL MOUNTING INSTRUCTIONS:
• Wallmountinstallationdoesnotrequirestands.
• Locatethetwoplasticsaddleclamps,twoselflockingnutsandtwometalwall-mountbrackets.
• Placetheuppersaddlesoverthetopofthemainmetaltube,asillustrated,andpushtheboltsthrough
the lower saddle clamp, pinning the main metal tube in-between.
• Guidethewall-mountbracketsontotheboltsandsemi-tightenthefourselflockingnuts.
• PlacetheDryGuy™Thermanator™against the wall (power cord on left) and adjust the wall-mounting
brackets to 16” on center (common distance between wall studs) and level contact with the wall.
• Further adjust DryGuy™Thermanator™so drying tubes are approximately 11” to 12” away from
the wall. Securely tighten the four self locking nuts, making sure not to move saddle clamps out of
alignment.
• Withsaddleclampssecurelytightened,locatewallstudsandmeasureupfromtheoortoadesired
level, mark the wall where you want to mount the unit, making sure you have found the wall studs
and pre-drill screw holes with the appropriate size drill bit (If wall stud spacing is not appropriate for
proper mounting, insert the suitable size molly bolt for hollow walls following molly bolt manufacturer’s
instructions).
• Placeclearscrewcapcoverwasherontoscrews(SeeFig.3)andsecurelyscrewcompletedDryGuy™
Thermanator™assembly into pre-drilled holes in the wall or molly bolts.
• Whencompleteandsecure,pushwhitenishplasticcaptocoverscrews.
• Please note-When wall mounting DryGuy™Thermanator™(See Fig. 2) face unit so power cord is
positioned on the left, not on the right (as pictured on package).When mounting DryGuy™Thermanator™
in multiple tiers, allow a minimum of 18” between the main horizontal metal tubes.
IN-LINE SWITCH INDICATION:
• Switchcanbepresseddownfromeitherside,asshown(SeeFig.4).Donotopenswitch.Keepswitch
away from water.
• PressknobdowntoturnontheDryGuy™Thermanator™, press knob down to turn off (See Fig. 4).
DryGuy.com DryGuy.com
Fig 4
Fig 3
Fig 2
Fig 1
DryGuy.com September 2012
DryGuy™Thermanator™ DG2
Silent Boot, Shoe and Glove Dryer
INSTRUCTION MANUAL
BEFORE RETURNING THIS PRODUCT
FOR ANY REASON PLEASE CALL
1-888-330-9452
IF YOU SHOULD HAVE A QUESTION OR EXPERIENCE
A PROBLEM WITH YOUR DryGuy™PRODUCT
CALL 1-888-330-9452
Before you call, please have the following information available: Product MODEL number which is located below the UPC code on the
outside of the product box and the store receipt with purchase date. In most cases, a DryGuy™representative can resolve the problem
over the phone or via email and if not, can direct you to an authorized service center. If you have suggestions or comments, please send
them via email to: info@dryguy.net. Your feedback is vital to DryGuy™.
SAVE THIS MANUAL FOR FUTURE REFERENCE
IMPORTANT:
To assure product SAFETY and RELIABILITY, repairs and maintenance (other than those listed in this manual)
should be performed by authorized service centers or other qualified service organizations, always using
identical replacement parts.
ACCESSORIES:
No recommended accessories for use with your DryGuy™ Thermanator™ are available at this time.
CAUTION: The use of any accessory or attachment not recommended
may be hazardous and may void warranty.
SERVICE INFORMATION:
DryGuy™ Service Center is staffed with trained personnel to provide customers with efficient and reliable
product service. Whether you need technical advice, repair or genuine factory replacement parts, contact
customer service at 888-330-9452.
FULL ONE (1) YEAR USE WARRANTY:
DryGuy™(U.S.) warrants this product for One (1) Year against any defects in material or workmanship. The
defective product will be replaced or repaired at no charge in either of two ways:
The first, which will result in exchanges only, is to return the product to the retailer from whom it was
purchased (provided the store is a participating retailer). Returns should be made within the time period
of the retailer’s policy for exchanges (usually 30 days after the sale). Proof of purchase may be required.
Please check with the retailer for their specific return policy regarding returns. The second option is to
take or send the product (prepaid) to a DryGuy™authorized service center for repair or replacement at our
discretion. Proof of purchase, store name and date of purchase may be required.
This warranty does not apply to accessories. This warranty gives you specific legal rights and you may have
other rights which vary from state to state. Should you have any questions, contact the service center. This
product is not intended for commercial use.
THE FOLLOWING WILL NOT BE COVERED UNDER WARRANTY:
- Any modification to DryGuy™Thermanator™
- Product has been misused or improperly cared for
- Products over One (1) Year from date of original purchase
- Warranty request without original receipt
- Repairs done by anyone other than DryGuy™or a DryGuy™authorized repair facility
In consideration of the above promises by DryGuy™, the buyer agrees to and accepts the following conditions:
1. That this warranty is in lieu of all other warranties, expressed or implied.
2. That all warranties OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
EXCLUDED OR WAIVED.
3. That the buyer’s sole remedy shall be to obtain replacement of the product free of charge from
DryGuy™provided any and all warranty defects falls within the warranty period and meets all warranty
provisions.
4. That this remedy is in lieu of all other remedies or claims for damages, consequential or otherwise,
which the buyer may have against DryGuy™.
DryGuy.com
DryGuy.com September 2012
DryGuy™Thermanator™ DG2
Silent Boot, Shoe and Glove Dryer
INSTRUCTION MANUAL
BEFORE RETURNING THIS PRODUCT
FOR ANY REASON PLEASE CALL
1-888-330-9452
IF YOU SHOULD HAVE A QUESTION OR EXPERIENCE
A PROBLEM WITH YOUR DryGuy™PRODUCT
CALL 1-888-330-9452
Before you call, please have the following information available: Product MODEL number which is located below the UPC code on the
outside of the product box and the store receipt with purchase date. In most cases, a DryGuy™representative can resolve the problem
over the phone or via email and if not, can direct you to an authorized service center. If you have suggestions or comments, please send
them via email to: info@dryguy.net. Your feedback is vital to DryGuy™.
SAVE THIS MANUAL FOR FUTURE REFERENCE
IMPORTANT:
To assure product SAFETY and RELIABILITY, repairs and maintenance (other than those listed in this manual)
should be performed by authorized service centers or other qualified service organizations, always using
identical replacement parts.
ACCESSORIES:
No recommended accessories for use with your DryGuy™ Thermanator™ are available at this time.
CAUTION: The use of any accessory or attachment not recommended
may be hazardous and may void warranty.
SERVICE INFORMATION:
DryGuy™ Service Center is staffed with trained personnel to provide customers with efficient and reliable
product service. Whether you need technical advice, repair or genuine factory replacement parts, contact
customer service at 888-330-9452.
FULL ONE (1) YEAR USE WARRANTY:
DryGuy™(U.S.) warrants this product for One (1) Year against any defects in material or workmanship. The
defective product will be replaced or repaired at no charge in either of two ways:
The first, which will result in exchanges only, is to return the product to the retailer from whom it was
purchased (provided the store is a participating retailer). Returns should be made within the time period
of the retailer’s policy for exchanges (usually 30 days after the sale). Proof of purchase may be required.
Please check with the retailer for their specific return policy regarding returns. The second option is to
take or send the product (prepaid) to a DryGuy™authorized service center for repair or replacement at our
discretion. Proof of purchase, store name and date of purchase may be required.
This warranty does not apply to accessories. This warranty gives you specific legal rights and you may have
other rights which vary from state to state. Should you have any questions, contact the service center. This
product is not intended for commercial use.
THE FOLLOWING WILL NOT BE COVERED UNDER WARRANTY:
- Any modification to DryGuy™Thermanator™
- Product has been misused or improperly cared for
- Products over One (1) Year from date of original purchase
- Warranty request without original receipt
- Repairs done by anyone other than DryGuy™or a DryGuy™authorized repair facility
In consideration of the above promises by DryGuy™, the buyer agrees to and accepts the following conditions:
1. That this warranty is in lieu of all other warranties, expressed or implied.
2. That all warranties OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
EXCLUDED OR WAIVED.
3. That the buyer’s sole remedy shall be to obtain replacement of the product free of charge from
DryGuy™provided any and all warranty defects falls within the warranty period and meets all warranty
provisions.
4. That this remedy is in lieu of all other remedies or claims for damages, consequential or otherwise,
which the buyer may have against DryGuy™.
DryGuy.com
Table of contents
Other DryGuy Dryer manuals
DryGuy
DryGuy Wide-Body DG00011 Configuration guide
DryGuy
DryGuy ThermoAir User manual
DryGuy
DryGuy Circulator DG10 User manual
DryGuy
DryGuy AC/DC DG12 User manual
DryGuy
DryGuy TurboDry DG00301 User manual
DryGuy
DryGuy 02135 User manual
DryGuy
DryGuy Transporter DG00401 User manual
DryGuy
DryGuy Wide-Body DG00011 User manual
DryGuy
DryGuy Circulator DG10 User manual
Popular Dryer manuals by other brands
Bosch
Bosch Vision 300 Operating Operating, care and installation instructions
Electrolux
Electrolux EDH3497RDW user manual
Miele
Miele TMG 440 WP operating instructions
Siemens
Siemens WT47W590GB Installation and operating instructions
Haier
Haier GDE750AW User manual and installation instructions
Demargo
Demargo DM156NF Instructions for installation and operation