DS18 SBAR25 User manual
SBAR25
OWNER’S MANUAL
REMOTE CONTROLLER
INCLUDED
“L” BRACKETS
INCLUDED
MAST CLAMP
INCLUDED
SBAR25 2-WAY 2X100W/2X300W
FEATURES INSTALLATION
MODEL DESCRIPTION RMS / PEAK POWER Read Before Installing
Mounting
White:L-Speaker+
White B:L-Speaker-
Yellow:R-Speaker+
Yellow B:R-Speaker-
One 25” Sound Bar Speaker System
Pair 2” Tube Mounting Bracket
Pair “L” Mounting Bracket
Three NBR PAD
One 6mm Hex Wrench Chromed
INSTALLATION
INITIAL SETUP
WARNING-
Packaging Includes:
SBAR25
25.276in
642mm
11.811in
300mm
749.50mm 29.508in
130mm 5.118in
67.11mm 2.642in
Step 1: Remove Soundbar and ALL hardware from the packing
Step 2: Find a good location that allows for easy wiring of the speaker (and LED lights)
Plus does not impair your movement around the location
Step 3: Choose the first or second installation
Step 4: First installation,use M8-15 locking the base bracket.
Step 5: Pull the U-Ring into the tube .
Step 6: Put the M8-55 screw into the base
and U-Ring hole.
Step 7: Use the M8 nut locking until the soundbar is locked in place
Step 8: Second installation, find the right way and mark the drill hole location,
drill D8.5-D9 hole.
Step 9: Adjust the soundbar angle, use the 6mm hex wrench locking.
Step 10: The mouting parts and detail please look the TYPE 1 & TYPE 2 view show .
Step 11: Connect the red, green, blue & black to LED controller or battery,
choose the color you want
Step 12: Connect the speaker wire to stereo AMP.
TYPE 1
TYPE 2
DIMENSIONSINSTALLATION
Mounting
