Duke Fitness WB50 User manual

TF
DUWB50.01.02
max. 200 kg
~ 90 Min.
CM
30 kg
ASSEMBLY AND
OPERATING INSTRUCTIONS
Art. No. DU-WB50
L 151 | W 160 | H 112
WEIGHT BENCH WB50

2
WEIGHT BENCH WB50

3
Dear customer,
Thank you for choosing a Duke Fitness brand tness equipment. Duke Fitness oers you tness
equipment that makes it easy to start exercising regularly, stay t and lose weight. We want to help
you to achieve your tness goals quickly and sustainably and hope that your new tness equipment
will help you to do so. Do not hesitate to contact us if you have any further questions about your
training or tness equipment, or if you would like to add more equipment to your existing tness
equipment. We wish you much of success!
Your Fitness Team from Sport-Tiedje and Duke Fitness
Further information can be found at www.sport-tiedje.com
Legal Notice
Sport-Tiedje GmbH
Europe’s No. 1 for home tness
International Headquarters
Flensburger Straße 55
24837 Schleswig
Germany
Management:
Christian Grau
Sebastian Campmann
Dr. Bernhard Schenkel
No. HRB 1000 SL
Local Court Flensburg
European VAT Number: DE813211547
Disclaimer
©2019 Duke® is a registered brand of the company SportTiedje GmbH. All rights
reserved. Any use of this trademark without the explicit written permission of Sport-
Tiedje is prohibited.
Product and manual are subject to change. Technical data can be changed without
advance notice.
Intended Use
The equipment may only be used for its intended purpose.
The equipment is only suitable for home use. The equipment is not suitable for semi-professional
(e.g. hospitals, associations, hotels, schools, etc.) and commercial or professional use (e.g. tness
studios).

4
WEIGHT BENCH WB50
ABOUT THIS MANUAL
Please carefully read the entire manual before installation and rst use. The manual will help you to
quickly set up the system and explains how to safely use it. Make sure that all persons exercising with
the equipment (especially children and persons with physical, sensory, mental or motor disabilities)
are informed about this manual and its contents in advance. In case of doubt, responsible persons
must supervise the use of the equipment.
This equipment has been manufactured according to the latest safety knowledge.
As far as possible, potential safety hazards which could cause injury have been
eliminated. Make sure to carefully follow the instructions and that all parts are
securely in place. If required, read through the instructions again to correct any
mistakes.
Please pay close attention to the safety and maintenance instructions given here. The contract
partner cannot be held liable for damage to health, accidents or damage to the equipment when it
is not used in accordance with these instructions.
The following safety instructions may appear in this manual:
࣑ATTENTION
This notice indicates potentially hazardous situations which, if not avoided, may result in
property damage.
⚠CAUTION
This notice indicates potentially hazardous situations which, if not avoided, may result in slight
or minor injuries!
⚠WARNING
This notice indicates potentially hazardous situations which, if not avoided, may result in death
or serious injuries!
⚠DANGER
This notice indicates potentially hazardous situations which, if not avoided, will result in death
or serious injuries!
LNOTICE
This notice indicates further useful information.
Retain these instructions in a safe place for future reference, maintenance or when ordering
replacement parts.

5
Content
1 GENERAL INFORMATION 6
1.1 Technical Data 6
1.2 Personal Safety 7
1.3 Set-Up Place 8
2 ASSEMBLY 9
2.1 General Instructions 9
2.2 Scope of Delivery 10
2.3 Assembly 14
3 STORAGE AND TRANSPORT 21
3.1 General Instructions 21
3.2 Folding Mechanism 21
4 TROUBLESHOOTING, CARE AND MAINTENANCE 22
4.1 General Instructions 22
4.2 Faults and Fault Diagnosis 22
4.3 Maintenance and Inspection Calendar 22
5 DISPOSAL 23
6 RECOMMENDED ACCESSORIES 23
7 ORDERING SPARE PARTS 24
7.1 Serial Number and Model Name 24
7.2 Parts List 25
7.3 Exploded Drawing 26
8 WARRANTY 27
9 CONTACT 29

6
WEIGHT BENCH WB50
1 GENERAL INFORMATION
1.1 Technical Data
Weight and Dimensions
Article weight (gross, incl. packaging) approx. Box 1: 32 kg
Box 2: 4.5 kg
Box 3: 31 kg
Box 4: 21 kg
Article weight (net, excl. packaging) approx.: 30 kg plus weight discs
Package dimensions (L x W x H) approx. Box 1: 109 cm x 44.5 cm x 16.2 kg
Box 2: 164 cm x Ø30
Box 3: 31.5 cm x 31.5 cm x 11.5 cm
Box 4: 53 kg x 26.5 cm x 17.5 cm
Set-up dimensions (L x W x H) approx.: 151 cm x 160 cm x 112 cm
Folding dimensions (L x W x H) approx.: 61 cm x 119 cm x 163 cm
Weight discs: 10 Pcs. (2 x 10 kg, 4 x 5 kg , 4 x 2.5 kg
Maximum user weight: 150 kg
Maximum weight load: 50 kg
Maximum total load: 200 kg

7
1.2 Personal Safety
⚠DANGER
+ Before you start using the equipment, you should consult your physician that this type of
exercise is suitable for you from a health perspective. Particularly aected are persons who:
have a hereditary disposition to high blood pressure or heart disease, are over the age of 45,
smoke, have high cholesterol values, are overweight and/or have not exercised regularly in
the past year. If you are under medical treatment that aects your heart rate, medical advice
is absolutely essential.
+ Note that excessive training can seriously endanger your health. Please also note that
heart rate monitoring systems can be inaccurate. If you notice any signs of weakness,
nausea, dizziness, pain, shortness of breath, or other abnormal symptoms, stop exercising
immediately and seek advice from your doctor if necessary.
⚠WARNING
+ This equipment may not be used by children under the age of 14.
+ Children should not be allowed unsupervised access to the equipment.
+ Persons with disabilities must have a medical license and must be under strict observation
when using the equipment.
+ The equipment is strictly for use by one person at a time.
+ Keep your hands, feet and other body parts, hair, clothing, jewellery and other objects well
clear of moving parts.
+ During use, wear suitable sports clothing rather than loose or baggy clothing.When wearing
sports shoes, make sure they have suitable soles, preferably made of rubber or other non-
slip materials. Shoes with heels, leather soles, studs or spikes are unsuitable. Never exercise
barefoot.
⚠CAUTION
+ Make sure that nobody is within the range of motion of the equipment during training so as
not to endanger you or other persons.
+ Do not insert any objects of any kind into the openings of the device.

8
WEIGHT BENCH WB50
1.3 Set-Up Place
⚠WARNING
+ Do not place the equipment in main corridors or escape routes.
⚠CAUTION
+ Choose a location in which to place the equipment such that there is enough free space/
clearance to the front, the rear and to the sides of the equipment.
+ The training room should be well ventilated during training and not be exposed to any
draughts.
+ Choose the place in which to set up the equipment such that there is enough free space/
clearance to the front, the rear and to the sides of the equipment.
+ The set-up and mounting surface of the equipment should be at, loadable and solid.
࣑ATTENTION
+ The device may only be used in one building, in suciently tempered and dry rooms
(ambient temperatures between 10°C and 35°C). The equipment should not be used
outdoors or in rooms with high humidity (over 70%) like swimming pools.
+ A oor protective mat/equipment underlay can help to protect high-quality oor coverings
(parquet, laminate, cork, carpets) from dents and sweat and can help to level out slight
unevenness.

9
2 ASSEMBLY
2.1 General Instructions
⚠DANGER
+ Do not leave any tools, packaging materials such as foils or small parts lying around,
as otherwise there is a danger of suocation for children. Keep children away from the
equipment during assembly.
⚠WARNING
+ Pay attention to the instructions attached to the equipment in order to reduce the risk of
injuries.
⚠CAUTION
+ Ensure to have sucient room for movement in each direction during assembly.
+ The assembly of the equipment must be carried out by at least two adults. If in doubt, seek
the help of a third technically skilled person.
࣑ATTENTION
+ To prevent damage to the equipment and the oor, assemble the equipment on a mat or
packaging board.
LNOTICE
+ In order to make the assembly as simple as possible, some screws and nuts to be used can
already be pre-assembled.
+ Ideally, assemble the equipment at its later set-up place.

10
WEIGHT BENCH WB50
2.2 Scope of Delivery
The scope of delivery consist of the following parts. At the beginning, check whether all parts
and tools belonging to the device are included in the scope of delivery and whether damage has
occurred. In the event of complaints, the contractual partner must be contacted directly.
⚠CAUTION
If parts of the scope of delivery are missing or damaged, the assembly must not be carried out.

11

12
WEIGHT BENCH WB50

13

14
WEIGHT BENCH WB50
2.3 Assembly
Before assembly, take a close look at the individual assembly steps shown and carry out the assembly
in the order given.
LNOTICE
First loosely screw all parts together and check that they t properly. Tighten the screws using
the tool only when you are instructed to do so.
Step 1: Assembly of the Base Frame
1. Mount the left and right Upright Frame (1 & 2) to the rear Base Frame (3) using four Hex Bolts(19),
eight Washers (25) and four Nylon Locknuts (27).
2. Mount the rear Crossing Frame (4) to the left and right Upright Frame (1 & 2) using four Hex
Bolts(19), eight Washers (25) and four Nylon Locknuts (27).
3. Slide the Adjustable Rod (14) through the holes on the left and right Upright Frame (1 & 2).
4. Mount the left and right Safety Hook (23 & 24) to the left and right Upright Frame (1 & 2) using
a total of two Washers (26) and two Nylon Locknuts (28).
5. Tighten the Bolts and Nuts.

15

16
WEIGHT BENCH WB50
Step 2: Assembly of the Buttery Arms
1. Slide the left and right Buttery Arms (8 & 9) into the holders on the left and right Upright
Frames (1 & 2).
2. Pass the Foam Tubes (10) through the openings on the left and right Buttery Arms (8 & 9).
3. Slide one Foam (17) over each Foam Tube (10).
4. Place a Spring Clip (18) on the weight plate holders on the left and right Buttery Arms (8 & 9).

17
Step 3: Assembly of the front Upright Frame
1. Mount the Main Frame (5) to the rear Crossing Frame (4) using one Hex Bolt (19), two
Washers(25), one Nylon Locknut (27) and the Pin (29).
2. Mount the front Upright (6) to the Main Frame (5) using one Hex Bolt (20).
3. Mount the Stabilizer Plate (7) to the Main Frame (5) and the front Upright (6) using a total of two
Hex Bolts (19), four Washers (25) and two Nylon Locknuts (27).
4. Tighten the Bolts and Nuts.

18
WEIGHT BENCH WB50
Step 4: Assembly of the Cushions
1. Place the Backrest Cushion Frames (13) on the rods of the Main Frame (5).
2. Mount the Backrest Cushion (16) to the Backrest Cushion Frames (13) using a total of four Hex
Bolts (22) and four Washers (26).
3. Mount the Seat Cushion (15) to the Main Frame (5) using four Hex Bolts (21) and fourWashers(26).
4. Slide the Foam Tube (12) into the holder on the Main Frame (5) and slide Foam (17) on each side
of the Foam Tube (12).
5. Tighten the Bolts.

19
Step 5: Assembly of the Leg Extension
1. Mount the Leg Extension (11) to the Main Frame (5) using one Hex Bolt (19), two Washers (25)
and one Nylon Locknut (27).
2. Tighten the Bolt and the Nut.
3. Slide the Foam Tubes (12) into the upper and lower holes of the Leg Extension (11).
4. Slide one Foam (17) onto each side of the Foam Tubes (12).

20
WEIGHT BENCH WB50
Step 6: Attaching the Weight Discs
1. Place the Barbell Bar (36) on the rack.
2. Slide one 10kg Weight Disc (37) onto each side of the Barbell Bar (36) and secure each Weight
Disc(37) with a Spring Clip (18).
3. Slide one 5kg Weight Disc (38) onto the holder on the Buttery Arms (8 & 9) and secure each
Weight Disc (38) with a Spring Clip (18).
4. Slide two 5kg Weight Discs (38) onto the holder on the Leg Extension (11) and secure theWeight
Discs (38) with a Spring Clip (18).
5. Slide one 2.5kg Weight Disc (39) onto each side of the Dumbell Bars (41) and secure each Weight
Disc (39) with one Screw Collar (40).