Matrix MG-PL Series User manual

1
MG-PL Series
Service Manual

2
Product Browse

3

4

5

6

7

8

9
Contents
CHAPTER 1: SERIAL NUMBER LOCATION
1.1 Serial Number Location...........................................................................................................10
CHAPTER 2: ASSEMBLY INSTRUCTION
2.1 Tools Required For Assembly.................................................................................................17
CHAPTER 3: MAINTENANCE & TROUBLESHOOTING
3.1 Plate Loaded & Free Weight Benches Maintenance ...............................................................18
3.2 Troubleshooting......................................................................................................................18
CHAPTER 4: PART REPLACEMENT GUIDE
4.1 Plastic Bushing Replacement..................................................................................................19
4.2 Swing Arm Replacement.........................................................................................................20
4.3 Pad Replacement ...................................................................................................................21
4.4 Leg Adjustment Cover Replacement.......................................................................................22
4.5 Hand Grip Foam Replacement................................................................................................23
4.6 Bushing Replacement.............................................................................................................24

10
CHAPTER 1: Serial Number Location
1.1 Serial Number Location
MG-PL12
MG-PL13

11
CHAPTER 1: Serial Number Location
MG-PL14
MG-PL15

12
CHAPTER 1: Serial Number Location
MG-PL23
MG-PL33

13
CHAPTER 1: Serial Number Location
MG-PL34
MG-PL50

14
CHAPTER 1: Serial Number Location
MG-PL62
MG-PL70

15
CHAPTER 1: Serial Number Location
MG-PL71
MG-PL76

16
CHAPTER 1: Serial Number Location
MG-PL77
MG-PL79

17
CHAPTER 2: Assembly Instruction
2.1 TOOLS REQUIRED FOR ASSEMBLY
Note: For additional assembly information, please refer to the Assembly
Guide.

18
CHAPTER 3: Maintenance & Troubleshooting
3.1 Plate Loaded & Free Weight Benches Maintenance
Weekly PM:
1. Check all hardware to ensure everything is tight (including all pull pins)
2. Inspect pads for damage
Weekly Cleaning:
1. With a clean, dry, 100% lint free cloth and a recommended cleaning solution, wipe down
the entire frame so it is free of dust, dirt and sweat
2. With a clean, dry, 100% lint free cloth and a recommended cleaning solution, wipe down
all pads and hand grips
Monthly PM:
1. Clean and grease all pull pins
Monthly Cleaning:
1. Wipe down any chrome bars (non-painted surfaces) with a cloth damped with WD-40 to
clean and prevent rust or corrosion
3.2 Troubleshooting
Due to the simple structure of the PL series, most issues are easily recognized and can be
corrected by replacing the related part. Please contact the Matrix Fitness customer service
team with any questions.

19
CHAPTER 4: Part Replacement Guide
4.1 PLASTIC BUSHING REPLACEMENT
1) Loosen the screw at the end of the bar.
2) Replace the plastic bushing and lock the screw.

20
CHAPTER 4: Part Replacement Guide
4.2 SWING ARM REPLACEMENT
1) Loosen the screw on the swing arm.
2) Replace the swing arm and secure it with a bolt.