Dunlop FFM4 User manual
92503016061REVC
FFM4 FUZZ FACE®MINI DISTORTION
jimdunlop.com
SPECIFICATIONS
Input Impedance 10 kΩ
Output Impedance
Max Volume 16 kΩ
-6 dB Volume* 126 kΩ
Max Gain 45 dB
Bypass True Hardwire
Current Draw 2 mA
Power Supply 9 volts DC
*Measured at 1 kHz
DUNLOP MANUFACTURING, INC.
P.O. BOX 846 BENICIA, CA 94510 U.S.A.
TEL: 1-707-745-2722 FAX: 1-707-745-2658
DESCRIPTION
• Hand-wired with Russian military
germanium transistors
• Pedalboard-friendly size, AC
power and on/bypass status LED
• Rich gloss black nish
• True bypass
CONTROLS
VOLUME knob controls overall
effect volume
FUZZ knob controls amount
of fuzz
FOOTSWITCH toggles on/
bypass (blue LED indicates on)
DIRECTIONS
• Run a cable from your guitar
to the FFM4’s INPUT jack
and another cable from the
FFM4’s OUTPUT jack to
your amplier.
• Start with both controls at 12
o’clock.
• Turn the effect on by depressing
the footswitch.
• Rotate the VOLUME knob
clockwise to increase
overall effect volume or
counterclockwise to decrease it.
• Rotate the FUZZ knob clockwise
to increase amount of fuzz or
counterclockwise to decrease it.
FFM4 JOE BONAMASSA FUZZ FACE®MINI DISTORTION
POWER
The FFM4 Joe Bonamassa Fuzz
Face Mini Distortion is powered
by one 9-volt battery (open battery
door on underside of pedal to
install), a 9-volt AC adapter such
as the Dunlop ECB003/
ECB003EU, or the DC Brick™
and Iso-Brick™ power supplies.
®
