Explanations:
control or button setting don´t care,
LED´s are not lit.
control setting for the described
sound sample; LED is lit.
button in On position (pressed).
button does not care.
button setting in Off position.
Gerätebau GmbH
Germany
Internet: http://www.engl-amps.com
Graphics and layout by
Horst Langer, Amp Designer
Sound setting sample #21 & #22
R
Powerball-2:
Sound sample #21: EMG Heavy Rhythm, CH 3 - Lead (3)
Sound sample #22: EMG Heavy Lead, CH 4 - Lead (4)
THE MAKING OF S O U N D !!!
We would like to give you a few suggestions how your new Powerball can be set up
to achieve perfect sounds through your cab.
Of course finally it will be up to you to dial in everything the way you want it,
including final volume settings or the use of Loop and Noise Gate, but maybe the
suggested sound setting samples will give you a good start.
Please note that the settings were done on a straight ENGL 4x12 cab loaded with
Celestion V 30 speakers. The guitars we used had 3 different characters:
Strat loaded with EMG active Humbucker Pickups, a Strat loaded with Single Coils
and a Les Paul with regular passive Humbuckers.
Play Loud ! and enjoy your new Powerball as much as I did creating those settings.
sincerely Bernd Aufermann, guitarist.
Lead (3)
Bottom
Lead Gain-3
Clean Gain-1
Lead (4)
Bottom
Bright Bottom
Bass
Bass
Middle
Middle
Middle-boosted
Treble-Clean
Treble
Treble-Crunch
Lead Vol.-3
Clean Vol.-1 Crunch Vol.-2
Lead Vol.-4 Master A
Presence
Master B
Depth Punch
Power
Stand By
Lead Gain-4
Crunch Gain-2
Input
Channel
1 / 2
3 / 4
Channel
Up /
Down
Middle-
boosted
Power Tube Monitor
V1 V2 V3 V4
Amp
Tube
Powerball
II
Lead (3)
Bottom
Lead Gain-3
Clean Gain-1
Lead (4)
Bottom
Bright Bottom
Bass
Bass
Middle
Middle
Middle-boosted
Treble-Clean
Treble
Treble-Crunch
Lead Vol.-3
Clean Vol.-1 Crunch Vol.-2
Lead Vol.-4 Master A
Presence
Master B
Depth Punch
Power
Stand By
Lead Gain-4
Crunch Gain-2
Input
Channel
1 / 2
3 / 4
Channel
Up /
Down
Middle-
boosted
Power Tube Monitor
V1 V2 V3 V4
Amp
Tube
Powerball
II
