Durabrand DVD-1002 User manual

IB-DVD1002 (AT)-WM-E-032706
MODEL DVD-1002
PROGRESSIVE SCAN PLAY
(FOR TVSWITHAPPROPRIATEINPUTJACKS)
PLAYS DVD VIDEOS
PLAYS ALLAUDIO CDS
PLAYS MP3 RECORDED DISCS
PLAYS CD-R &CD-RWDISCS
PLAYS JPEG PHOTODISCS
PLEASE READ CAREFULLYBEFORE USE
IB-DVD1002(AT)-WM-E-032706.pmd 7/5/2006, 10:24 AM1

IB-DVD1002 (AT)-WM-E-032706
SAFETY INSTRUCTIONS
TOPREVENTFIREOR SHOCK HAZARD, DO NOTUSETHEPLUG WITH AN EXTENSIONCORD,
RECEPTACLE OR OTHEROUTLETUNLESS THE BLADES CAN BEFULLYINSERTED TOPREVENT
BLADEEXPOSURE.TO REDUCETHE RISKOFFIREOR ELECTRICSHOCK,DONOTEXPOSE
THIS APPLIANCE TORAIN OR MOISTURE. TO PREVENTELECTRICALSHOCK, MATCH WIDE
BLADE PLUG TOWIDE SLOT,FULLYINSERT.
WARNING
The lightning flash with
arrowhead symbol,within an
equilateraltriangle, is intended
to alertthe user to thepresence
of uninsulated dangerous
voltage”within the product’s
enclosure that may be of
sufficient magnitude to
constitute arisk of electric
shockto persons.
CAUTION
RISK OFELECTRICSHOCK
DO NOT OPEN
WARNING:TOREDUCETHE
RISKOF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR
BACK). NO USER
SERVICEABLEPARTS INSIDE.
REFER SERVICING TO
QUALIFIED SERVICE
PERSONNEL.
Theexclamationpoint within
an equilateral triangle is
intended toalert the userto
thepresence of important
operatingandmaintenance
(servicing)instructionsin the
literatureaccompanyingthe
appliance.
IMPORTANT SAFETYINSTRUCTIONS
1
S3152A
13.Unplug thisapparatus duringlightning storms orwhen unusedforlong periods oftime.
14.Referallservicingtoqualified service personnel.Servicing is requiredwhentheapparatushas
beendamagedinanyway,such aspower-supply cord or plug is damaged, liquid has been spilled
orobjectshavefallen into theapparatus,theapparatushasbeenexposedtorain ormoisture,
does notoperate normally or has been dropped.
15.This appliance shall notbe exposedto dripping or splashing water and that no object filledwith
liquid such asvases shall be placed on the apparatus.
Rating plateandcaution markingare markedonthe bottomenclosureoftheapparatus.
1.Readtheseinstructions.
2.Keeptheseinstructions.
3.Heedall warnings.
4.Followall instructions.
5.Donotusethis apparatus nearwater.
6.Clean only withdrycloth.
7.Do not blockanyventilationopenings, install in accordancewith the manufacturer’sinstructions.
8.Do not install near any heatsourcessuch asradiators, heatregisters, stoves,or otherapparatus
(including amplifiers)thatproduceheat.
9.Do not defeat the safetypurposeofthepolarized orgrounding-typeplug. Apolarized plug has
two blades with one wider than the other.Agrounding type plug has two blades and athird
grounding prong. The wide bladeorthethird prongareprovidedforyour safety.Iftheprovided
plugdoes not fit into youroutlet,consultan electrician for replacement of the obsolete outlet.
10.Protect the power cord frombeing walked on or pinched particularly atplugs, convenience
receptacles,andthepointwheretheyexitfromtheapparatus.
11.Only use attachments/accessories specified by the manufacturer.
12.Useonly with the cart,stand, tripod, bracket, or tablespecified bythemanufacturer,
orsold with the apparatus.When acartisused, use caution when moving the
cart/apparatus combination to avoidinjury from tip-over.
IB-DVD1002(AT)-WM-E-032706.pmd 7/5/2006, 10:24 AM2

IB-DVD1002 (AT)-WM-E-032706
2
FCC NOTE
Thisdevice complieswith Part15 of theFCCRules.Operationis subject tothe following two
conditions: (1) Thisdevicemay not cause harmfulinterference, and(2) Thisdevicemust accept
anyinterference received,including interferencethatmaycause undesirable operation.
WARNING:
Changes or modifications to this unit not expressly approved by the party responsible for
compliancecould void the user’sauthorityto operate the equipment.
NOTE:
This equipmenthasbeentestedandfound tocomplywiththelimitsforaClassBdigital device,
pursuant toPart 15oftheFCCrules. Theselimitsaredesignedtoprovidereasonable protection
againstharmfulinterferenceinaresidential installation.Thisequipment generates, uses and can
radiate radio frequencyenergy and, if not installed and used in accordancewith theinstructions,
maycause harmful interference to radiocommunications.However,there isnoguarantee that
interferencewill not occurin aparticularinstallation.Ifthis equipment doescause harmful interference
to radio ortelevision reception, whichcanbe determined byturningtheequipment off and on, the
userisencouraged to try tocorrecttheinterferencebyoneor moreof the followingmeasures.
-Reorient or relocate the receiving antenna.
-Increasetheseparationbetweentheequipmentandreceiver.
-Connect thisequipmentinto an outlet on acircuit differentfromthattowhich thereceiver is
connected.
-Consult thedealeror an experienced radio/TVtechnicianforhelp.
NOTE
This product incorporates copyright protection technology that isprotected bymethod claims of
U.S. patent numbers 4,631,603; 4,819,098; 4,907,093; 5,315,448; and 6,516,132 and other
intellectualproperty rightsowned by Macrovision Corporation and otherrights owners. Use of this
copyright protection technology must be authorized byMacrovision Corporation, and is intended
forhome and other limited viewing uses only,unlessotherwise authorized by Macrovision
Corporation.Reverseengineeringordisassembly isprohibited.
Do not apply oil orpetroleum products orsolvents toanypart ofthis set.
CAUTION
Use of controls or adjustments or
performance of procedures otherthan
those specified herein may result in
hazardousradiationexposure.Do not
opencoversand do not repairyourself.
Refer servicing to qualified personnel.
ThisDVDVIDEO player isclassifiedas
CLASS 1LASER PRODUCT asstatedon
thebottom of the set.
INCLUDEDACCESSORIES
Thefollowing itemsareincludedwith your
DVD player:
-Remote Control
-AAABatteries (2)
-Audio/VideoCables
-User’sGuide
-ProductRegistration Card
SAFETY INSTRUCTIONS
IB-DVD1002(AT)-WM-E-032706.pmd 7/5/2006, 10:24 AM3

IB-DVD1002 (AT)-WM-E-032706
TABLE OF CONTENTS
3
Getting Started:
Safety Instructions ----------------------------------------------------------------------------------------1
Connections ------------------------------------------------------------------------------------------------4
Location of Controls --------------------------------------------------------------------------------------6
Remote Control Operation -----------------------------------------------------------------------------8
Notes on Discs ---------------------------------------------------------------------------------------------9
Precautions -------------------------------------------------------------------------------------------------10
Initial Setting:
System Setup (TV System,Sleep Control, TV Type&Default)
SettingtheTVSystem -----------------------------------------------------------------------------11
Setting the Sleep Control ------------------------------------------------------------------------11
Selecting the TV Type -----------------------------------------------------------------------------12
Default -Resetting the Functions to Factory Defaults -------------------------------------12
Language Setup (OSD, Audio, Subtitle &Menu) ------------------------------------------------13
Audio Setup
Setting the Digital Audio out --------------------------------------------------------------------13
Setting the Downmix Audio out ----------------------------------------------------------------14
VideoSetup------------------------------------------------------------------------------------------------14
Basic Operation:
1.BasicPlay--------------------------------------------------------------------------------------------15
2.UsingtheSearch &SkipFunctions----------------------------------------------------16
3.Repeat Play ------------------------------------------------------------------------------------------16
4.Programmed Play--------------------------------------------------------------------------------17
5.Search for Preferred Play---------------------------------------------------------------------18
6.ZoomPlay ------------------------------------------------------------------------------------------18
7.Slow-Motion Play ---------------------------------------------------------------------------------19
8.Viewingfrom a Desired Angle---------------------------------------------------------------19
9.Selecting AudioMode --------------------------------------------------------------------------19
10.Change SubtitleLanguage-------------------------------------------------------------------19
11.DisplayingDiscInformation-------------------------------------------------------------------20
12.MP3Disc Operation-----------------------------------------------------------------------------21
13.JPEG orPictureDisc Operation--------------------------------------------------------------21
Trouble Shooting -----------------------------------------------------------------------------------------22
Glossary ---------------------------------------------------------------------------------------------------24
Specifications --------------------------------------------------------------------------------------------25
IB-DVD1002(AT)-WM-E-032706.pmd 7/5/2006, 10:24 AM4

IB-DVD1002 (AT)-WM-E-032706
CONNECTIONS
4
YOUR DVDPLAYER
RED WHITE
RED
WHITE
YOUR TV SET
Cr/Pr Cb/Pb Y S-VIDEO
VIDEOOUTCOAXIAL
R -AUDIO-L
YOUR DVD PLAYER
YOUR TV SET
Cr/Pr Cb/Pb Y S-VIDEO
VIDEOOUTCOAXIAL
R - AUDIO- L
RED WHITE YELLOW
RED WHITE
YELLOW
COMPONENT VIDEO IN
Cr/Pr Cb/Pb Y
Cr/PrCb/Pb Y S-VIDEO VIDEOOUTCOAXIAL R -AUDIO-L
YOUR TV SET
YOUR DVDPLAYER
Better –S-Video
ConnecttheDVDplayertoyour TV withthe
supplied video(yellow)andaudio (red&
white) cables asabove. Inthisconnection,
please set the video output mode to S-VIDEO
(see page 14).
ConnectyourplayertoTVusingone of the3diagrams below.
For better picture quality,connect the DVD player
to your TV with an optional S-Video cable (not
included) and the supplied audio (red &white)
cablesto yourTV if your TV hasan S-Video
input as above. In this connection, please set the
video output mode to S-VIDEO (see page 14).
Good –Composite(Normal)
Best –Component
Connect the DVD player to your
TV with the optional Component
videocables(notincluded) and
the supplied audio cables(red &
white) to your TV if your TV has
component videoinputs(Pb/Pr/
IMPORTANT
The progressivescan video quality is availableonlywhen
using componentvideoinputsPb/Pr/Y andaprogressive
scanTV.Comparedtointerlacedvideo, progressivescan
videoeffectivelydoubles thescanning rate ofthepicture
andoffershigherpicture resolutionand quality,resultingina
verystable,flicker-freeimage.YoucanentertheProgressive
Scan Video mode withthefollowingsteps:
1.Set the Video Output mode to YUV (see page 14).
2.Fully stop your DVD player.
3.Open the disc door.
4.Pressthe DISPLAY/P-SCAN button, the display will
showthe tip of ENABLEPROGRESSIVE”,usethe
buttontohighlight OK”option and press the OK button
to confirm.
Yor Cb/Cr/Y) asshown.In this connection, please set
the video output mode to YUV (see page 14).
(TV set)
NOTE: Ifyou want touseNormal video or S-video
mode again,please open thedisc doorandpressthe
DISPLAY/P-SCAN buttontogetout of the Progressive
Scan Video mode and view in normal video mode. (If this
isnotdone,therewillbenopicture or adistortedpicture.)
IB-DVD1002(AT)-WM-E-032706.pmd 7/5/2006, 10:24 AM5

IB-DVD1002 (AT)-WM-E-032706
CONNECTIONS
For theaterqualitysound, connect the audio cablesdirectlyto your home theater system for
maximum audioenjoyment.
Best
Better
HOME THEATER SYSTEM
WITH 5.1 CHANNELINPUT
YOURDVDPLAYER
YOUR TV SET
Cr/Pr Cb/Pb Y
S-VIDEO VIDEO OUTCOAXIAL R - AUDIO - L
HOME THEATER SYSTEM
WITH5.1 CHANNELINPUT
YOURDVDPLAYER
YOUR TV SET
Cr/PrCb/PbY
S-VIDEO VIDEOOUTCOAXIAL R- AUDIO- L
For best sound,connect theDVD playertoyour
hometheatersystem with acoaxialcable(not
included); For picture,connecttheDVDplayer
to yourTV with the supplied video cable.
Inthisconnection, youcan enjoythedynamic
andrealistic sound ofDolbyDigitalSurround
through yourhometheatersystem.
NOTE
This player is equipped with copy protection technology.Do not connect thisplayer to your TV
via aVCR using AVcables, asthe picture from thisplayer will not appear properlyon your TV.
(Thisplayermayalsonotbecompatiblewith somecombinationTV/VCRs forthesamereason.
Refertoyour TV’smanufacturerfor more information.)
5
For better sound, connectthe DVDplayerto
your home theater system with the supplied
audiocables; Forpicture,connect theDVD
playertoyourTVwith thesuppliedvideocable.
In this connection, you can hear the amplified
sound through your home theater system.
(Home Theater System)
IB-DVD1002(AT)-WM-E-032706.pmd 7/5/2006, 10:24 AM6

IB-DVD1002 (AT)-WM-E-032706
LOCATIONOFCONTROLS
TOPPANEL
1. OPEN button - Press to open the door.
2. DISC DOOR - Open and put the DVD disc inside with label side up.
3. ON/STANDBYbutton - Press to switchthe set on or switchto standby(off).
4. PLAY/PAUSEbutton- Presstostartplaying adisc or to pauseplay.
5. STOP button - Stops playing theDISC,pressthistwiceforfull stop.
6. NEXT SKIP button - Skipsto the next chapter (forwards).
7. PREVIOUSSKIPbutton- Skips tothepreviouschapter(backwards).
2 1
3
4
5
6
7
PREVIOUS
NEXT
STOP
PLAY
PAUSE
ON
STANDBY
6
FRONTPANEL
1. POWER indicator -The indicator lightsup when the player ison.
2. STANDBYindicator -Theindicatorlights up whenthe playerisinstandbymode (off).
3. PLAYindicator - The indicator lightsup whenthe disc startsplaying.
4. REMOTECONTROLSIGNALsensor- Receives the signalfrom the REMOTECONTROL
(Aim the REMOTE towards this sensor).
1 2 3 4
IB-DVD1002(AT)-WM-E-032706.pmd 7/5/2006, 10:24 AM7

IB-DVD1002 (AT)-WM-E-032706
LOCATIONOFCONTROLS
REMOTE CONTROL
7
1.MUTE button- Instantlyturnsoffthe sound,
pressagaintorestoresound.
2.MENU button- Presstodisplaythe disc’smenu
(if your disc hasamenu).
3.TITLE button - Displays the title menu if
present in the disc.
4. / button - Presstoskip to previous
title,chapter ortrack /press and holdmore than
1secondtofastbackward playback.
5. / button - Press to skip to next title,
chapter or track /press and hold more than 1
second to fast forward playback.
6.DIRECTION buttons - Used in DVD menus &
audio MP3 track selection.
7.OKbutton- Presstostart/pause play orentera
command or confirm aselection.
8.NUMERICbuttons - Used in DVD menus
&audio CD/MP3 track selection.
9.ANGLE /PROGRAM button- InDVD mode,
presstodisplayangle menu (if presentonthe
DVDdisc);InSTOPmode,presstoprogram
your favoritetrack inCD/MP3 mode.
10.VOLUMEbuttons- Presstoadjust thevolume
level(remembertoadjustyourTV’svolume).
11.ON/STANDBYbutton - Press to turn the set ON or STANDBY.
12.SETUP button - In STOP mode, press to display the DVD player’ssetup menu.
13.DISPLAY/P-SCAN button - Press this button to view the elapsed time, title or chapter
informationandthe track numbers during play;Presstoset ProgressiveScan function. (This
onlyworks when disc door isin the open mode.)
14.STOPbutton - Stops play,press twice to full stop.
15.SUBTITLEbutton- Presstosetupthesubtitle(if available on yourdisc).
16.AUDIO button - Press to select the desired audio channel.
17.SEARCHbutton- Allowsyou to select thedesired discstartingtime, track or titleor
select the point in time to start playback.
18.REPEATbutton- Pressthisbuttontorepeatthecurrenttrack,chapter,title, achosen
section (Ato B),orallofthe disc.
19.SLOW/ZOOMbutton- Presstozoom theplaying pictureinDVDmodeorhold more than1
secondtoviewslowmotion playback.
MUTE
ON/STANDBY
TITLE MENU SETUP
STOP DISPLAY
P-SCAN
SUBTITLE
AUDIO
SEARCH
REPEAT
PROGRAM
ANGLE
ZOOM
SLOW
VOLUME
PLAY/PAUSE
19
15
14
18
17
16
12
13
11
1
2
3
4
5
8
10
9
6
7
IB-DVD1002(AT)-WM-E-032706.pmd 7/5/2006, 10:24 AM8

IB-DVD1002 (AT)-WM-E-032706
REMOTECONTROLOPERATION
8
BatteryInstallation
Point the REMOTE CONTROL unit from less
than 20 feet from the remote control sensor
and within about 600 of the front of the DVD
player (not your TV set).
RemoteControlOperation Range
Tipson Remote ControlOperation
The operating distancemayvary according
tothebrightnessofthe room.
Do not point brightlightsat theremote
control sensor (likelaser pointers).
Do not placeobjects between the remote
control unit and the remote control sensor.
2.Insert2size AAA”alkalinebatteries
(included) into the battery compartment
accordingtothe+and –markings
inside the batterycompartment.
3.Push heretoclosethebatterydoor.
1.Push door tab toopenthebatterydoor..
Tips on Battery Use
Reversingpolaritieswilldamagethe
batteriesandpossiblyyour REMOTE. Be
sure to followpolarity (+and –)asindicated.
Do not mix differenttypes batteriestogether
(Alkaline,Carbon-Zinc,Nickel-Cadmium
etc.), or old batterieswith new ones.
When notinusefor an extendedperiod of
time(over 60days)removethe batteriesto
prevent possible acid leakage or corrosion
resulting in damage to your remote.
When the batterieshavebecome discharged,
theymustbedisposedofinasafemanner
that complieswithallapplicable laws.
Installationof batteriesshould only bedone
byan adult (for safety).
Rememberto point the
REMOTE CONTROL
inthe directionofthe
DVDplayer,notthe TV
set.
REMOTE SENSOR RANGE
Distance
within20feet
30
o30o
MUTE
ON/STANDBY
TITLE MENU SETUP
STOP DISPLAY
P-SCAN
SUBTITLE
AUDIO
SEARCH
REPEAT
PROGRAM
ANGLE
ZOOM
SLOW
VOLUME
PLAY/PAUSE
IB-DVD1002(AT)-WM-E-032706.pmd 7/5/2006, 10:24 AM9

IB-DVD1002 (AT)-WM-E-032706
NOTES ON DISCS
Discs thatcan be played
DISC TYPE &LOGO MARK RECORDED CONTENT
DVDVideo
(Region 1)
DVD-R
Video +Audio
JPEGdisc Video only
or Audio /Video
“.JPG”or “JPEG”
Video +Audio
CD-Rdisc
CD-RWdisc
Music CD Audio only
Audio only
or Audio /Video
Audio only
or Audio /Video
MP3 disc MP-3 Audio only
9
Discsthat cannot beplayed
CD-Is,CD-ROMs(includingcomputersoftware discsand gamediscs),DatapartofCD-Extras,
DVD-ROMs,DVD Audio discs, DIVX, MPEG 4DVD discs, HD layer on SACDs or discs recorded
inanother formatsuchasSECAM, andregionsother thanyourregion. Thisset willalsonotplay
damaged, scratchedordirtydiscs.
NOTE:Ahandsymbol ”may appear on theTVscreenwhenpressingsomebuttons.A ”
meansthat theoperationisnotpermitted bytheDVDplayer of thediscinthatmode or at
that time, sometimestheset needsto be in stopmode or other mode for thatbutton to
work.
IB-DVD1002(AT)-WM-E-032706.pmd 7/5/2006, 10:24 AM10

IB-DVD1002 (AT)-WM-E-032706
PRECAUTIONS
Safety
As the laser beam used in the DVD player
maybe harmful to the eyes, do not attempt
to disassemblethe cabinet. Refer servicing
to qualified personnel only(itisperfectly
safeif youdon’tunscrew andopenthe
cabinet).
Should any solidobjectorliquid fallinto
the player,unplug the player,and haveit
checked by qualified personnel before
operating it anyfurther.
Placement of YourDVD Player
Donot leavethe player in alocation near a
heat source, or in aplacesubject to direct
sunlight, excessive dust ormechanical
shock.
Do not placethe player on an inclined or
unstableplace.
Do not placeanything within 1inchof the
sidesorback ofthecabinet. The ventilation
holesmust not be covered for the player
to operate properlyand prolong the life of
itscomponents.
Don’tplacethis DVD player on lacquered
finished furniture without awood or glass
protector.
Iftheplayerordiscswill beleftinacar
parked in the sun, put theplayer in the trunk
orwheretheplayerwillnotbesubjected
tothedirectraysandheat of thesun.
Cleaning the Cabinet
Clean the cabinet, panel and controlswith
asoft cloth slightlymoistened with avery
milddetergent solution or aplain damp
cloth. Do not useanytype of abrasivepad,
scouring powder,orsolvent,suchas
alcohol or benzine.
Operation
If the player is brought directly from a cold
to awarm location, or isplaced in avery
damproom,moisture may condenseonthe
lens inside. Should this occur,the player
maynot operate properly.Inthiscase,
removethe discandwait about an hourfor
the moisture to evaporate. If the player has
not been used for along time, turn the set
to ON to warm it up for afew minutes before
inserting adisc.
ThisDVD player isdesigned to be played
onastable nonvibratingposition.Ifyoubump
theset during DVDplay,thepicture or music
may stoporskip forseveral seconds.This
isnormalfor this typeofplayer.
10
CleaningDiscs
Before playing, make sure the disc is
clean.Ifnot,cleantheDISCwithacleaning
cloth. Wipe the DISC in astraight motion
from the center out.
Do notusesolventssuchasbenzine,
thinner,commerciallyavailable cleanersor
anti-staticsprayintended for vinylLPs.
Donot touch the playback side of the disc.
Everyfingerprint cancauseplayback
problems. Do not scratchthe disk.
Donot store the Discs in aplacesubject
todirect sunlight or near heat sources.
HandlingDiscs
IB-DVD1002(AT)-WM-E-032706.pmd 7/5/2006, 10:24 AM11

IB-DVD1002 (AT)-WM-E-032706
INITIALSETTING
11
1InSTOPmode,pressthe SETUPbuttononthe
remote control, aSETUP menu like this will appear
on the TV screen.
4Whenthesettinghas beenfinished,pressthe
SETUPbuttontoexitthe SETUP mode.
For the firsttimeuse,youmayneedtoset someofthesettings and adjustments accordingtoyour
TVandfavoritepreferences, but mostpeople will not adjustthe following functions and
will go directly to Page 15 for basic play.
Youcan adjust theSYSTEM SETUP,LANGUAGE SETUP,AUDIOSETUPandVIDEO SETUP in
themenubyfollowingthesteps below.
3PresstheOKbutton to confirm yourselection.
2Use these / / / buttonsto highlight your
selection.
AB
TOSETPRESS
TOQUITPRESS
THEN
SETUP
OK
SYSTEMSETUP
TVSYSTEM
TVTYPE
SLEEPCONTROL
DEFAULT
EXITSETUP
4:3PS
NTSC
OFF
RESTORE
SYSTEM SETUP (TVSYSTEM,SLEEPCONTROL,TVTYPE&DEFAULT)
Settingthe TVSYSTEM
This allowsyou to fall asleep to amovie or music disc and the DVD player will stop itself at a
set time.
Settingthe SLEEPCONTROL
1In STOP mode, press the SETUP button on the
remote control, ” (System Setup) is selected.
2Press button to highlight TV SYSTEM”.
3Press button and use / buttonsto highlight
your preferredoption.
4PresstheOKbutton to confirm.
5PresstheSETUPbutton to exit the SETUP mode.
1InSTOPmode,pressthe SETUPbuttononthe
remote control, ” (System Setup) is selected.
2Press button anduse buttonto highlight
SLEEP CONTROL”.
3Press button and use / buttonsto highlight
your preferredoption.
4PresstheOKbutton to confirm.
5PresstheSETUPbutton to exit the SETUP mode.
NOTE: When theselected sleep timeis reachedafter play,thesystem will go into STANDBY
mode.
-NTSC
AUSAvideostandard.If yourTVis NTSCsystem, select this mode.
-PAL
Avideo standard in Europe. If the connected TV isPALsystem, select this mode.
-AUTO
Iftheconnected TV ismulti-system,selectthismode.The output formatwill be in accordance
with the video signal of the disc.
AB
TOSETPRESS
TOQUITPRESS
THEN
SETUP
OK
PAL
AUTO
NTSC
SYSTEMSETUP
TVSYSTEM
TVTYPE
SLEEPCONTROL
DEFAULT
EXITSETUP
AB
TOSETPRESS
TOQUITPRESS
THEN
SETUP
OK
SYSTEMSETUP
TVSYSTEM
TVTYPE
SLEEPCONTROL
DEFAULT
EXITSETUP
OFF
120
MIN
90
MIN
60
MIN
45
MIN
30
MIN
15MIN
IB-DVD1002(AT)-WM-E-032706.pmd 7/5/2006, 10:24 AM12

IB-DVD1002 (AT)-WM-E-032706
INITIALSETTING
12
Selecting the TVTYPE
Select the aspect ratio of the movie to matchyour TV set. There are three types of screen
sizesyou may select. (NOTE: If your DISC isnot encoded toallow you to change the aspect
ratio, the TV displaycannot be changed.)
4X3 Standard (4:3 PS) -Choose this setting ifyou want to see
moviesto fill the entire screen of your TV.This might mean that
parts of the picture (the left and right edges)won’tbe seen.
Most discs produced in aWIDESCREEN format can’tbe cropped
in this fashion.
4X3Letterbox (4:3 LB) -Choose this setting if you want to see
moviesin their original aspect ratio(width-to-height ratio). You’ll
see the entire frame of the movie, but it will take up asmaller
portion of the screen vertically.The movie will appear with black
barsat thetopand bottomofthescreen, butyouwillseeeverything
to the right &left of the center asin amovie theater.
4X3 Standard
4X3 Letterbox
16 X 9Widescreen(16:9) -Choosethissetting if yourDVDPlayer
isconnectedtoaWIDESCREENTV.If youchoosethissettingand
youdon’thaveawidescreenTV,theimages on the screen may
appeardistortedduetoverticalcompression(faces may seem
long andthin or wider than normal).
Ifyouplayadiscrecordedin4X3format on awidescreenTV,the
left andrightside of thescreenwillappearblack. Press STOPand
SETUPbuttons tochange to 4:3ratioormatchthe typeofTVyou have.
16X9 Widescreen
1In STOP mode, press the SETUP button on the
remote control, ” (System Setup) is selected.
2Press button anduse buttonto highlight
TVTYPE”.
3Press button and use / buttonsto highlight
your preferredoption.
4PresstheOKbutton to confirm.
5PresstheSETUPbutton to exit the SETUP mode.
AB
TOSETPRESS
TOQUITPRESS
THEN
SETUP
OK
4:3LB
16:9
4:3PS
SYSTEMSETUP
TVSYSTEM
TVTYPE
SLEEPCONTROL
DEFAULT
EXITSETUP
Default-Resettingthe functions to factorydefaults
Incaseyoufiddledaround withyourset’scontrolsandyoucannot return theset toits normal
operation;wehavemade re-setting themajor optionson this set veryeasy foryou.
NOTE: Ifyouset DEFAULT”,all items in thesetup menu willberesettodefault setting.
1InSTOPmode,pressthe SETUPbuttononthe
remote control, ” (System Setup) is selected.
2Press button anduse buttonto highlight
DEFAULT”.
3Press buttontoselect RESTORE”.
4PresstheOKbutton to confirm.
5PresstheSETUPbutton to exit the SETUP mode.
AB
TOSETPRESS
TOQUITPRESS
THEN
SETUP
OK
RESTORE
SYSTEMSETUP
TVSYSTEM
TVTYPE
SLEEPCONTROL
DEFAULT
EXITSETUP
IB-DVD1002(AT)-WM-E-032706.pmd 7/5/2006, 10:24 AM13

IB-DVD1002 (AT)-WM-E-032706
INITIALSETTING
13
LANGUAGESETUP(OnScreenDisplay,AUDIO, SUBTITLE&MENU)
These items allow you to preset the OSD language (OSD =On Screen Display), audio language,
subtitle language, and menu language that will always be used for every disc (the language selected
is available).
NOTE 1: Ifthelanguageselectedisnotavailable on thedisc, theoriginallanguagedesignated
byeachdiscwillbeselected.
NOTE2: Youcan changetheAUDIOorSUBTITLElanguage easilybypressing the AUDIO or
SUBTITLE button on the remotecontrol (refer to page 19).
1In STOP mode, press the SETUP button on the
remote control, ” (System Setup)isselected.
2Use button to highlight
A
B
”(LanguageSetup).
3Press button and use / buttons to highlight
the item which you want to change.
4Press button and use / buttonsto select
yourpreferredlanguage.
5PresstheOKbutton to confirm.
6PresstheSETUPbutton to exit the SETUP mode.
TOSETPRESS
TOQUITPRESS
THEN
SETUP
OK
AB
OSDLANGUAGE
AUDIOLANG
SUBTITLELANG
MENU LANG
SPANISH
ENGLISH
FRENCH
LANGUAGE SETUP
EXITSETUP
AUDIOSETUP
-RAW
Thecoaxial output on therearpanelis connectedwith areceiverthatacceptsDolby
Digital, MPEG or other signals. It works for most of the coaxial connections.
-PCM
The coaxial output onthe rear panel is connected with areceiverthat accepts PCM SIGNALS.
Setting the Digital Audio Out (Only foruse inCOAXIALconnection mode)
Your DVDplayercan be connectedtoahomecinemasystemwith coaxialdigitalaudiojack to
realizehighqualitysound effects, digitalaudiooutput allowsyoutoselectRAW or PCMdigital
signal.
1In STOP mode, press the SETUP button on the
remote control, ” (System Setup)isselected.
2Use button to highlight ”(AudioSetup).
3Press button to highlight DIGITALOUT”.
4Press button and use / buttonsto select
RAW”or PCM”.
5PresstheOKbutton to confirm.
6PresstheSETUPbutton to exit the SETUP mode.
TOSETPRESS
TOQUITPRESS
THEN
SETUP
OK
AB
RAW
AUDIOSETUP
DIGITALOUT
PCM
EXITSETUP
DOWNMIX
IB-DVD1002(AT)-WM-E-032706.pmd 7/5/2006, 10:24 AM14

IB-DVD1002 (AT)-WM-E-032706
INITIALSETTING
14
VIDEOSETUP(VIDEOOUT)
1InSTOP mode, press the SETUP button on the
remotecontrol, ” (System Setup) is selected.
2Use button to highlight ” (Video Setup).
3Press button to highlight VIDEOOUT”.
4Press button and use / buttonsto select
YUV”or S-VIDEO”.
5PresstheOKbutton to confirm.
6PresstheSETUPbutton to exit the SETUP mode.
TOSETPRESS
TOQUITPRESS
THEN
SETUP
OK
A
B
S-VIDEO
YUV
VIDEOSETUP
VIDEOOUT
EXITSETUP
SettingtheDownmixAudio Out
1In STOP mode, press the SETUP button on the
remote control, ” (System Setup)isselected.
2Use button to highlight ”(AudioSetup).
3Press button and use button tohighlight
DOWNMIX”.
4Press button and use / buttonsto select
LT/RT”or STEREO”.
5PresstheOKbutton to confirm.
6PresstheSETUPbutton to exit the SETUP mode.
TOSETPRESS
TOQUITPRESS
THEN
SETUP
OK
A
B
LT/RT
AUDIOSETUP
DIGITALOUT
STEREO
EXITSETUP
DOWNMIX
Downmixaudio outputsetupallows you to select LT/RTorSTEREOaudiooutput mode.
-LT/RT
Select this item when the disc supporting ProLogicDolby Stereo isplayed. You havethe
opportunity to hear aprogram’ssoundtrack inthe most accurate and realisticpresentation
possible.
-STEREO
For 5-channel output,the leftand right track signalsareoutput simultaneously; For 2-channel
output, the ordinarystereo signal isoutput.
NOTE 1:YUV isasuperior videostandard. Itcanoptimizethetranslation of the Video,Y
means Luminance, Uand Vmean chrominance.
NOTE2: Ifsounddoesnotcome outofyour TV,tryusing other AUDIO INPUTjacks nearthe
Videojacksand make surejacksarepluggedin.
If the video connection isNormal or S-Video, pleaseset the Video Output to S-VIDEO; If you
want to use the Component Video connection or Progressive Scan video (see page 4), please
set the Video Output to YUV mode.
IB-DVD1002(AT)-WM-E-032706.pmd 7/5/2006, 10:24 AM15

IB-DVD1002 (AT)-WM-E-032706
1. BASIC PLAY
15
LABELSIDEUP
PUSHHERE
Disc
1After completing alloftheaudioandvideocableconnections,turnonyour TV andset it tothe
correct video-in channel (for more information, pleasesee boxbelow).
2Plug the player’sAC power cord into an AC wall outlet and press ON/STANDBYbutton on
the player or on the remote control.
3Press the OPEN button on theDVD player to open the disc
door.Place a disc gently on thetray (lableside up)andclosethe
door by pushingitdown.The DVD playerstarts toreadthedisc’s
tableofcontents (thismay take 10-20 seconds).
4Press VOLUME +or VOLUME –button to adjust the volume level on your TV’sREMOTE
and DVD’sREMOTE.
6Topauseplayback, press the button; Tostop playback, press the STOPbutton.
NOTE 1: Loadthe disc with the label side facing up,when
playing adouble-sided disc, load it with the desired
playing side face down.
NOTE 2: NO DISC”or ERR DISC”will showinthedisplayif
thediscisupsidedownor the discisbadlyscratched
or dirty,it will not play,pleaseclean it or change the
disc, alsoyou can buyadisc polisher to repairit.
NOTE: During play,press the STOPbutton once, the displaywill show PRE STOP ”,if
you press the STOP button the secondtime, the displaywill show STOP ”,and
now your system isin the full STOP mode.
7Toresume playback, press the button.
8Toskip to another track/chapter,press the / buttonsrepeatedlyduring playback.
5Some discs will start playing automatically,and otherswill displaythe Disc Contents Menu
onTVscreen. If themenu ispresented,usethe , , & buttonstohighlight yourselection
and press OK button to confirm. Toselectaplayoption, press numericbuttons(0-9).
9Toaccess the disc menu or title menu duringDVD play,press the MENU or TITLE button
on the remote control.
NOTE: This player hasascreen saver which will displayabouncing DVD oval if the player is
stopped or paused and no button ispressed for awhile.
HowtoFindyourTV’sVideoInput Channel
Make sure you havecompletedalltheconnections(see pages 4-5), you mayneed to
change your TV’svideo input mode to see the DVD player’smenu and movies. The video
input channel varieswith different brandsand models, many TV remote controlshavea
TV/VIDEO button which can be used to change to different video inputsand back to TV for
normal broadcast viewing. Onceyou selectedthe correct channel, your TV will show the
opening DVD screen. For more details, pleasesee your TV manual.
IB-DVD1002(AT)-WM-E-032706.pmd 7/5/2006, 10:24 AM16

IB-DVD1002 (AT)-WM-E-032706
2.USINGTHE SEARCH&SKIP FUNCTIONS
During play,you can searchquicklythrough achapter or track or usethe skip function to jump
to the next selection.
NOTE: In anyfast forward or fast backward mode,press the OK button to return to normal
playmode immediately.
SearchthroughaChapter or atrack
1During play,press and hold the FORWARD button on the REMOTE CONTROLto search
forward at afaster speed, the fast search speed changes as follows:
FORWARD X2 FORWARD X4 FORWARD X8 FORWARD X20
PLAY
2During play,press and hold the BACKWARD button on the REMOTE CONTROLto search
backward at afaster speed, the search speed changes as follows:
BACKWARD X2 BACKWARD X4 BACKWARD X8 BACKWARD
X20 PLAYY
16
Skippingchaptersor tracks
Duringplay,pressthe nextSKIP button on the REMOTECONTROL,itmoves to thenext
chapter/track; presstheprevious SKIP button on theREMOTECONTROL,it moves tothe
beginningofthe previouschapter/track.
3. REPEATPLAY
Allows you to repeat the current track, chapter,title, achosen section (A-B), or all of the disc.
Each time you press the REPEATbutton repeatedly,the repeat mode changesasfollows:
A-BCANCEL”SHOWSAND
NORMALPLAYRESUMES
REP: [CHAPTER] REP:[TITLE] REP: [REP ALL] REP: [OFF]
REPEATA-
REPEATA-B
A-B CANCEL
WILLREPEATTHISCHAPTER
OVER AND OVER
WILLREPEATTHIS
TITLE OVERAND OVER
WILLREPEATTHIS
DISC OVERANDOVER
ForDVD
REPEATATOBSEGMENTOVERAND OVER.
NOTE: When you select A-B”repeat play:
1. Press the REPEATbutton until REPEATA- ”appearsat the beginning of the segment
(point A)you want to playrepeatedly.
2.Press REPEATbutton again at theend of thesegment (point B), REPEATA-B”will
appear on the display.
3.The DVD player will automaticallyplaythe selected segmentsAto Bover and over till
you press REPEATbutton again.
NORMALPLAY
IB-DVD1002(AT)-WM-E-032706.pmd 7/5/2006, 10:24 AM17

IB-DVD1002 (AT)-WM-E-032706
17
For CD
3. REPEATPLAY
REP: [REP1] REP: [REPALL] REP: [OFF] REPEATA- REPEATA-B
A-BCANCEL
For MP3
REP: [REP1] REP: [REPDIR] REP: [REPALL] REP: [OFF] REPEATA-
REPEATA-B A-BCANCEL
4. PROGRAMMED PLAY
Youcan makeaprogram of up to 16 tracksintheorderyouwantthem to be playedduringthe
STOP mode. Thisfeature canbeusedon CD andMP3.
1Press ANGLE/PROGRAM button in the STOP mode, the screen will displaythe program
menu:
PROG
1____5____9____13_ ___
2____6_ ___10 ____14_ ___
3 _ _ _ _ 7 _ _ _ _ 11_ _ _ _ 15_ _ _ _
4__ _ _8_ _ __12 _ ___16_ _ __
PLAY CLEAR
3After programming, move the direction buttons to select PLAY”then press the OK button, the
playerwill start to playthe disc in the programmed order.
4Toskip to the next (programmed) track, press the NEXT button.
5Tostop programmed playback, press STOPbutton twice.
2Pressthenumericbuttonand thedirectionbuttonstoinputthetracknumber corresponding to
the order of the track on the CD/MP3 disc you wish.
IB-DVD1002(AT)-WM-E-032706.pmd 7/5/2006, 10:24 AM18

IB-DVD1002 (AT)-WM-E-032706
5. SEARCH FOR PREFERREDPLAY
Toselect ascene with the title, the chapter,
the track number and the time during play.
1Press the SEARCH button during play,
the screen will show ason the right:
2Move the LEFT &RIGHT DIRECTION
buttons( & )andpressthenumeric
buttonson theREMOTE to select thetitle,
the track, or the time, then press the OK
button to confirm.
3The player will jump to playthe section
you selected and the menu display
disappears from the screen.
PressSEARCHforCD
input thesecond
youwant tojumpto
inputtheminute
you want tojumpto
CD TRK02/12 00:03:111
trackyou want
tojump to
chapter youwant
tojump to
titleyouwant
tojump to
PressSEARCHfor DVD
for searching by title, chapter &time
DVD TT 01/02CH002/013 00:02:03
timeyouwant
tojump to
PressSEARCHfor MP3
input thesecond
youwant tojumpto
inputtheminute
you want tojumpto
MP3 TRK 0016/154 00:01:21
trackyou want
tojump to
6. ZOOM PLAY
1Press the ZOOM/SLOW button repeatedly to enlarge or reduce apicture. The display will show
as follows:
ZOOM 2 ZOOM3 ZOOM4 ZOOM1/2 ZOOM1/3 ZOOM1/4 ZOOM:OFF
2Press the DIRECTION buttons( , , & ) to move the enlarged picture alittle to up or
down, left or right.
3Toreturn to normal playfrom the ZOOM mode,press ZOOM/SLOW repeatedlytill the icon
shows ZOOM: OFF”.
NOTE: Some discs may not respond to the zoom feature and during some zoom functions the
picture edgesmay seem fuzzy,this isnormal.
(FOR DVD)
This function allowsyou to do aminimal zoom into apicture aswell asshift the zoom point.
18
IB-DVD1002(AT)-WM-E-032706.pmd 7/5/2006, 10:24 AM19

IB-DVD1002 (AT)-WM-E-032706
7. SLOW-MOTION PLAY
Adisc can also be played in slow-motion.
1Eachtimeyoupressandhold theZOOM/SLOWbuttonduringplay,the playbackspeed will
change asfollows:
SF 1/2 SF 1/4 SF 1/6 PLAYY
2Press OK button to resume normal play from any slow-motion mode.
(JUST FOR DVD)
NOTE 1: Sound will be silent during slow motion play.
NOTE 2: SF stands for SLOW FORWARD.
8.VIEWING FROMADESIRED ANGLE (DVDONLY)
Some DVDvideo discs maycontainsceneswhichhavebeenshotsimultaneouslyfroma
number of different camera angles. The jacket or caseof discs that are recorded with angles
will be marked with this icon:
3
Forthesediscs, the same scenecanbe viewedfrom anyofthesedifferent anglesusing the
ANGLE/PROGRAMbutton.
ANGLE1 ANGLE2 ANGLE3
NOTE:1. The recordedangles differ depending on thedisc used.
2.OnlysomeDVD discs have thisfeature.
3.This featureis onlyavailableonsomeDVDs.If it isnotavailableonyour DVD,ahand
” will showinthetopleftcorner..
9.SELECTINGAUDIOMODE
IfaDVDdisc contains aMulti-Audiosoundtrackfeature,youcanselectthedesiredaudio
languageby pressingtheAUDIO buttonrepeatedlyduringplay,playbackstatuswill bedisplayed
on the TV’sscreen.
Note 2:ThisDVD playerdoesnot supportDTS decoding. For DTSdisc,please select
otheroutput mode, such asAC-3; otherwise therewill be no sound output.
19
Note 1: Ifyoupressthe AUDIO button forseveral times, butthe desiredlanguageisnotselected,
itmeansthelanguageisnotavailable onthe disc.
NOTE:This operation works onlywith DVD discs on which multiplesubtitle languages are
recorded.Some DVDs haveno subtitles,somemay have5ormore.If no subtitlesare
recorded on your DVD, pressing this button will not change the subtitles.
Toremove subtitles, press the SUBTITLE button again till : [OFF] ”shows.
10.CHANGE SUBTITLE LANGUAGE (DVDONLY)
You can select adesired subtitle quickly and easily with the SUBTITLE button.
IB-DVD1002(AT)-WM-E-032706.pmd 7/5/2006, 10:24 AM20