DURAVIT Darling New DN 7255 User manual

Darling New # DN 7255
Installation instructions
Leben im Bad
Living bathrooms
Instructions for use
Power supply 110 V GFCI outlet must be provided on-site.
Distance between sensor and reflecting surfaces => 3” (75mm).
Without sensor switch = 0 (wall switch required), sensor left = L, sensor right = R.
The bathroom furniture range complies with the standards and guidelines applicable at the time of delivery and is designed for use in bathrooms.
Though designed for the wet environment, direct contact with water should be avoided, for example, when showering.
We reserve the right to make technical improvments and design modifications to the products illustrated.
MAL_Darling New_DN7255/15.04.1
# F49141
3x S8
2x 5x50
1x 4,5x35
A A B B
mm inch mm inch
600 23 5/8” 420 16 1/2”
# F49142

230 V
2x
3x
3
2x
1x
1 2 3 4
5 6 7
A 110 V GFCI outlet is required.
Mark the holes to be drilled for
the anchors.
Using a 3/8“ drill bit, drill the
anchor holes that have been
marked.
The plastic anchors provided
are for concrete wall
applications.
Thread the two mounting
screws into the top two
anchors, leaving the hooks
facing up.
Secure the L-bracket to the
wall with set screw on the
bottom.
Plug the mirror into the outlet
and line up the mounting
hooks with the inserts on
the back of the mirror.
Push mirror onto wall until
hooks are inserted securely.
Lay the bottom of the mirror
against the wall and tighten
the set screw to secure the
mirror in place.
Use the adjustment tool to
move mirror up and down for
the leveling.
MAL_Darling New_DN7255/15.04.1

Duravit NYC
105 Madison Avenue
New York, NY 10016
Toll Free 888-DURAVIT
Phone [phone]
Fax [phone]
[email protected]vit.com
www.duravit.nyc
Duravit USA, Inc.
2205 Northmont Pkwy., Ste. 200
Duluth, GA 30096
Toll Free 888-DURAVIT
Phone [phone]
Fax [phone]
[email protected]vit.com
www.duravit.us
Best.-Nr.DN7255/15.03.1