DWG INTPM User manual

Compatible Model
Optional Accessories
Installation Instruction Diagram
s
Dimensions
• CVC5300DPVF
• CVC5845DNV, CVC5945DNV
• CVC5735DNV, CVC5835DNV, CVC5935DNV
• HT7246iHR, HT7247iHR, HT7250iHR
• HT7248FFi, HTD8FFi
• HTINTD8, HTINTD9, HTINTD10
• OINT03D1G
Pendant Mount
The following items are included in this package.
1-1. Install mount onto the ceiling by using the screws provided.
• INTPM
• 1 Bracket Base Adaptor
• 1 Wrench
• 4 Tapping Screws #8 x 25
• 4 Hexagon Socket Screws M5 x 10
• 3 Machine Screws M4 x 15
• 3 Machine Screws M4 x 22
• 2 Machine Screws M4 x 18
Side ViewFront View
INTPM / INTPMW
Package Contents
Installation Guide
3.90” dia
3.90” dia
1.26” dia
1.06” dia
5.59” dia
1.02”
21.42”
13.15”
1.47”
TAPPING SCREW #8X25, 4EA
CEILING BRACKET BASE
CEILING
CEILING BRACKET BASE
CEILING PIPE
MACHINE SCREW SET M8X8, 2EA
FRONT
MACHINE SCREW SET M8X8, 2EA
CVCJBD
Dome Junction Box
JB03TG
Large Round Junction Box
DWG • 516-933-4900 • dwgdistribution.com

Installation Instruction Diagram Installation Instruction Diagram
INTPM / INTPMW
Installation Guide
MACHINE SCREW M4X15, 3EA
TURRET JUNCTION ASSEMBLY
TURRET JUNCTION BASE SPONGE
MACHINE SCREW M4X15, 3EA
TURRET BASE
TURRET ASSEMBLY
TURRET BODY
MACHINE SCREW M4X22, 3EA
BASE ASSEMBLY
BODY ASSEMBLY
MACHINE SCREW M4X15, 3EA
DOME BODY ASSEMBLY
OUTER COVER
DOME BASE ASSEBMLY
2. Arrange each piece as shown in the image below.
3. Fasten the camera onto the mount.
*Compatible models
CVC5845DNV(W)
CVC5945DNV(W)
CVC5300DPVF(W)
HTD8FFi
HTINTD8(W)
HTINTD9(W)
HTINTD10(W)
OINT03D1G
*Compatible models
HT7246iHR
HT7247iHR
HT7250iHR
HT7248FFi
*Compatible models
CVC5735DNV(W)
CVC5835DNV(W)
CVC5935DNV(W)
MACHINE SCREW M4X15, 2EA
JUNCTION ASSEMBLY
JUNCTION BASE SPONGE
1-2. Install INTPM onto ceiling.
1-3. Install CVCJBD junction box onto INTPM as shown in the image below.
1-4. Install INTPM onto ceiling.
1-5. Install JB03TG junction box onto INTPM as shown in the image below.
DWG • 516-933-4900 • dwgdistribution.com