DynaColor DH820E User manual

00P3DH720ZXSEA2
Integrated High Speed Dome Camera
User’s Manual
Indoor / Outdoor
Ver 1.2

User’s Manual
1
Table of Contents
1. Overview ................................................................................................................................ 2
1.1 Features ...................................................................................................................... 3
1.2 Package Contents ....................................................................................................... 4
1.3 Dimension.................................................................................................................... 6
2. Camera Cabling ..................................................................................................................... 7
2.1 Product Application ...................................................................................................... 7
2.2 Switch / Connector Definition ....................................................................................... 8
2.3 Communication Switch Setting .................................................................................... 9
2.4 ID Setting ................................................................................................................... 10
2.5 Camera Control Protocol Setting ............................................................................... 11
2.6 Power Connector ....................................................................................................... 12
2.7 Apply Alarm I/O ......................................................................................................... 12
2.8 RS-485 Connector Definition ..................................................................................... 12
3. Operation and Configuration.............................................................................................. 13
3.1 Display Format .......................................................................................................... 13
3.2 Setup ID Display ........................................................................................................ 14
3.3 Setup Title Display ..................................................................................................... 14
3.4 Setup Title Name ....................................................................................................... 14
3.5 Setup Time ................................................................................................................ 15
3.6 Setup Schedule ......................................................................................................... 16
Appendix A: Technical Specification ........................................................................................ 17
Appendix B: Switch Settings Index Table ................................................................................. 19
Camera ID Setup .................................................................................................................. 19
Protocol Setup ...................................................................................................................... 26

User’s Manual
2
1. Overview
The Dome Camera delivers up to 432x zoom ratio (A3 Model) to capture clear
image in the distance. Continuous Auto Focus, Back Light Compensation, Auto
Exposure and Digital Slow Shutter functions are provided for clear and high
quality image. Removable IR cut filter ensures 24 hours operation, while Privacy
Masks are specially designed to avoid any intrusive monitoring at specific region;
all of the salient functions can be incorporated to meet your needs. The Home
function allows users to specify a preset position as the <home position> or
<home functions> (Sequence / Auto-pan / Cruise). Under the mode, Dome
Cameras can come back to the preset home position or functions when the
camera has been idle for a user-defined period of time. Additionally, the unique
Schedule function enables users to program a preset point or function
(Sequence / Auto-pan / Cruise) so that these actions can be automatically
performed in certain period of time.
The Dome Camera provides variable pan / tilt speeds ranging from a fast patrol
of 400° per second to a slow ramble of 5° per second with 0.225° pan / tilt
accuracy for fast and accurate tracking ability. The 360° endless rotation and
-10°~190° tilt travel make tracking the object passing directly beneath the dome.
Maximum 256 preset points can be programmed for precise location of target
areas, and users can also define Sequence lines, Auto-Pan lines and Cruise
routes for the camera to operate automatically. In addition, RS-485
communication port is available for remote control purposes.
The Integrated High Speed Dome Camera provides 4 alarm inputs and 2 alarm
relay outputs, and the smart alarm management mechanism can be
programmed through the OSD setup menu; certain function (Preset / Sequence
/ Auto-Pan / Cruise) can be activated when an alarm is triggered.
Large set of built-in protocols provide connectivity to other surveillance systems.
The built-in protocols include DSCP, Pelco, VCL, Philips, AD-422, etc, which
allow the Dome Camera series to be integrated with other suppliers'
surveillance systems.

User’s Manual
3
1.1 Features
Precise and Accurate Performance
 Auto Calibration
 Preset accuracy of 0.225°
 Preset speed up to 400° /sec.
 Proportional Pan & Tilt Speed
 Preset Position / Sequence / Auto-Pan / Cruise
Dynamic Applications
 Multi-language OSD
 Schedule function
 Multiple built-in Protocols
 Up to 20 masking zones
 4 alarm inputs, 2 alarm output
 Motion Detection
 Flexible mountings
 Compact lightweight design for easy installation
 All-in-one type
Superior Camera Image Quality
 Minimum illumination 0.01 Lux (B / W)
 Digital Slow Shutter
 Electronic Shutter
 Wide Dynamic Range
 Auto White Balance
 Backlight Compensation
 Auto Exposure
 Image Inverse
 Removable IR Cut Filter
 Digital Noise Reduction
 Electronic Image Stabilizer

User’s Manual
4
1.2 Package Contents
Please check the box contains the items listed here. If any item is missing or
has defects, DO NOT install or operate the product and contact your dealer for
assistance.
Indoor Dome Camera Package
Camera Body Optical Cover
Hard Ceiling Mount
M4 Screw (x4)
Plastic Anchors (x4)
Quick Guide CD: Operation Manuals

User’s Manual
5
Outdoor Dome Camera Package
Dome Camera with
Outdoor Mount Kit
M3 Standard Screw (x1)
M3 Security Screw (x1)*
M5 Standard Screw (x1)
M5 Security Screw (x1)*
Waterproof Rubber
Quick Guide
CD: Operation Manuals
Optical Cover
Lubricant Security Torx*
*Optional: For Vandal Proof Cover only.

User’s Manual
6
1.3 Dimension
Indoor
Outdoor

User’s Manual
7
2. Camera Cabling
Please follow the instructions below to complete SDI High Speed Dome Camera
cable connections.
2.1 Product Application
Connect the Dome Camera to other devices as shown in the diagram to
complete a video surveillance solution.
NOTE: To extend the network distance up to 1.2 km (4000 feet) and to
protect the connected devices, it is highly recommended to place a
repeater at the mid-point. However, a repeater may be needed in the
network distance less than 1.2 km if the used cables are not the CAT 5,
24-gauge cables; refer to 2.7 RS-485 Connector Definition. Refer to the
repeater’s manual for detailed information.

User’s Manual
8
2.2 Switch / Connector Definition
Configuring the Dome Camera’s ID and communication protocol are required
before connecting the Dome Camera to other devices. The switches used for
configuring these settings are located on the camera’s back plate. Additionally,
the 22-Pin Connector for Data Cable connection and ISP Connector for
firmware upgrade kit connection are also set on the back plate.
Please refer to the diagram and table accompanied with for use of each switch /
connector.
Indoor Outdoor
Item Definition Remark
A I/O ALARM I/O
B ID Dome Camera ID Setup DIP Switch
C BNC BNC Video Output
D SETTING Communication Switch Setting
E Protocol Camera Control Protocol Setting
F RS485 RS485 Connector
G AC24V Connector Power connector

User’s Manual
9
2.3 Communication Switch Setting
The Camera’s communication switches are specified in the table below.
Communication Switch SW 1
RS-485 Setting
SW 2
SW 3
SW 4
SW 5 Reserved
SW 6 Reserved
RS-485 is the interface that communicates the Camera and its control device;
for this reason, the RS-485 setup of the Camera and the control device must be
the same. The RS-485 default setting is half-duplex (see the diagram follows).
Please do not change the default setting without qualified specialist or supplier’s
notice.
RS-485 Setting
Half-duplex Full-duplex

User’s Manual
10
2.4 ID Setting
Please assign an ID number to a Camera if there is more than one Camera in
the same network. The camera’s ID can be setup using the 10-bit ID Dip Switch,
which is located on the Camera’s back plate. If the Camera’s ID number is 6, for
instance, the ID switch SW 2 and SW 3 should be set to “ON” and the rest
should be set to “OFF” as shown below. Dip Switch configuration for ID No.
0~10 are listed in the table below. To complete ID setups, please refer to the
User Manual.
For switch configuration details, please refer to Appendix B: Switch Settings
Index Table.
NOTE: No two Cameras should be given the same ID, or
communication conflict may occur.

User’s Manual
11
2.5 Camera Control Protocol Setting
Define the protocol you are going to use basing on the devices of your
surveillance system. Generally, use one protocol even the devices are provided
from different manufacturers. Please refer to the table below for all supported
protocols with their matching switch numbers and baud rate and choose a
protocol for your Camera.
The table below shows various protocols with their matching switch numbers
and baud rate.
Switch No. Protocol Baud Rate
00 VCL 9600
01 Pelco D 2400
02 Pelco P 4800
04 Chiper 9600
05 Philips 9600
07 DSCP 9600
08 AD422 4800
09 DM P 9600
11 Pelco D 4800
12 Pelco D 9600
13 Pelco P 2400
14 Pelco P 9600
15 JVC 9600
21 Kalatel-485 9600
22 Kalatel-422 4800
Use the 6-bit dip switch (Camera Control Protocol Switch) to set your camera’s
control protocol and its baud rate. If select protocol “Pelco D”, which is of switch
no. 01 and baud rate 2400, for instance, set the SW-1 to “ON,” with the rest to
“OFF” as shown below.
For switch configuration details, please refer to Appendix B: Switch Settings
Index Table.

User’s Manual
12
2.6 Power Connector
Please refer to the illustrations below for power connector definition before
wiring.
SW 1 AC24V_1
SW 2 GND
SW 3 AC24V_2
2.7 Apply Alarm I/O
The Camera supports 4 digital alarm inputs and 2 digital alarm outputs. Please
make sure the alarm connections are properly wired before starting to configure
alarm related settings. Please refer to the pin definition table below for alarm
system wiring.
Pin
Definition
Pin
Definition
1 ALARM_OUT_NO_1
7 ALARM_OUT_COM_2
2 ALARM_OUT_NC_1
8 GND
3 ALARM_OUT_COM_1
9 ALARM_IN_4
4 GND
10
ALARM_IN_3
5 ALARM_OUT_NO_2
11
ALARM_IN_2
6 ALARM_OUT_CN_2
12
ALARM_IN_1
2.8 RS-485 Connector Definition
Please refer to the illustrations below for RS485 connector definition before
wiring.
RS485 Connector
SW 1 R-
SW 2 GND
SW 3 R+
SW 4 T-
SW 5 T+

User’s Manual
13
3. Operation and Configuration
3.1 Display Format
The information shown on the screen is described in terms of OSD display,
position and function description in the table below.
No.
Function
OSD
Display
D
escription
1
Motion MOTION Alarm Detect Message
2
Alarm ALARM 1 Alarm Message
3
F
ocus Modes
&
Backlight
A Auto Focus Mode
M
Manual Focus Mode
X Back Light Compensation OFF
B Back Light Compensation ON
4 Booting
Message
XX…(Dome Type); ID: 001 (Default)
DSCP / 9600 (Default)
INITIALIZING
Shows Dome Type, ID Address,
Protocol and Baud Rate
5 Error
Message
PAN ERROR
TILT ERROE
CAM MODULE ERROR
Shows system initializing error
message
6 Zoom
Ratio x1 Present Zoom Ratio (Optical Zoom/Digital Zoom)
7 Title

Maximum 20 characters for each title.
 16 sets of title are available.
8 Camera ID 001 Show the camera ID
9 Time XXXX / XX / XX XX : XX Year / Month / Day Hour: Minute
10
Position
Display XX YYY / YY
XX:
facing direction of PTZ
including N, E, Z, W, NE, SE,
SW, SN
YYY / YY: angle of PZT, 0~359 /
10~-90

User’s Manual
14
3.2 Setup ID Display
Press the direction key down to turn the MAIN MENU page from 1 to 2, and then
the menu item <ID DISPLAY> will be shown on the top. Users are allowed to
choose whether the Camera’s ID will be displayed on screen for identifying the
domes. Display the ID address of the selected Camera on the right bottom of
the screen by turning it <ON>. To hide the ID address of the selected dome, set
the item <OFF>.
3.3 Setup Title Display
Users are allowed to name a view area, where the title will be displayed on
screen for easy recognition.
Select <ON> to display the title set for a view area on screen while the camera
shooting the view area.
When <TITLE DISPLAY> is set <OFF>, no title will be displayed on screen even
titles have been set in advance.
3.4 Setup Title Name
Up to 16 zone titles can be set with maximum 20 characters for each title.
Follow the steps to set a camera title.
STEP 1: Operate the Camera to a view area where you want to set a title for
it.
STEP 2: Turn on the OSD and go to the <MAIN PAGE 2> to select <TITLE
SETTING>.
STEP 3: Select a number to represent the view area.

User’s Manual
15
STEP 4: Press the <CAMERA MENU> key (ENTER) on the keyboard to go
into the editing page.
TITLE SETTING: 01
0
1
2
3
4
5
6
7
8
9
EXIT
A
B
C
D
E
F
G
H
I
J
SAVE
K
L
M
N
O
P
Q
R
S
T
DELETE
U
V
W
X
Y
Z
:
/
.
,
TITLE:
ABC
STEP 5: Choose a character with direction keys and then press the
<CAMERA MENU> key (ENTER) to input. For example: <A>
<CAMERA MENU>, <B> <CAMERA MENU>, <C> <CAMERA
MENU>
TITLE: ABC
STEP 6: To delete input characters, move the cursor to <DELETE> and press
<CAMERA MENU> to delete the selected character.
STEP 7: When the setting is completed, move the cursor to <SAVE> and
press <CAMERA MENU> to save.
3.5 Setup Time
The time setting function is used to set the TIME related parameters of the
integrated high speed dome. Each item in the menu is listed as follows.
 TIME DISPLAY
Select <ON> to display time information on the screen or <OFF> not to
display.
 YEAR / MONTH / DAY
The items are for setting up the system date.
 HOUR / MINUTE
The items are for setting up the system time.

User’s Manual
16
3.6 Setup Schedule
The schedule function enables users to program a preset point or function
(Sequence / Auto-pan / Cruise) automatically to perform in a specific period of
time.
 SWITCH
Select <ON> to enable or <OFF> to disable the schedule function.
 POINT
Users are allowed to arrange 32 sets of schedule point, i.e. each set of
schedule point can be assigned one kind of schedule modes.
 HOUR / MINUTE
The items are for setting up the time to execute each schedule point.
 MODE
This is for setting the schedule function of the selected schedule point;
the options are including None, Preset, Sequence, Autopan, Cruise, IR
Function, please refer to SDI High Speed Dome Camera OSD Menu for
more details about the setup steps of each mode,.
 SCHEDULE RESET
Users can reset the whole schedule with the item.

User’s Manual
17
Appendix A: Technical Specification
A2 Model
A3 Model
Camera
Image Sensor 1 / 4” Sony CCD
Optical Zoom 26x 36x
Digital Zoom 1 ~ 12x variable
Effective Pixels NTSC: 480k
PAL: 570k
Horizontal Resolution 650 TVL
Scanning System NTSC / PAL
Synchronization Internal / Line Lock
Video Output 1.0 Vp - p / 75 Ω, BNC
S / N Ratio > 50 dB (AGC Off)
Minimum Illumination 0.08 lux (Color), 0.005 lux (B / W)
Focal Length 3.4 ~ 88.4 mm 3.4 ~ 122.4 mm
Focus Mode Auto / Manual
White Balance Auto / Manual
Iris Control Auto / Manual
Electronic Shutter 1 / 1 ~ 1 / 10k sec.
AGC Control Auto / Manual
Backlight Compensation On / Off
Operation
Pan Travel 360° endless
Tilt Travel - 10° ~ 190°
Manual Speed 0.5° ~ 90° /s
Presets 256
Preset Accuracy 0.225°
Preset Speed 5° ~ 400° /s
Sequence 8
Auto Pan 4
Cruise 8
Privacy Mask 20 (w / o motion detection window)
16 (w / motion detection window)
Proportional Pan & Tilt On / Off (Pan and tilt speed proportional to zoom ratio)
Resume after Power loss Yes
Home Function Preset / Sequence / Auto pan / Cruise
Auto Flip Image / Mechanical / Off
Digital Slow Shutter On / Off
Motion Detection On / Off
Wide Dynamic Range On / Off
Day / Night: IR Cut Filter On / Off
Image Freeze On / Off
Image Inverse On / Off
Noise Reduction 2D On / Off
3D On / Off
Electronic Image Stabalizer On / Off
Multiple Languages English / French / German / Italian / Japanese / Polish / Portuguese /
Russian / Spanish / Turkish / S. Chinese / T. Chinese
Built-in Protocol DSCP / Pelco P / Pelco D / AD422 / Philips / Kalatel / VCL / JVC
Zone Title 16
Alarm Input 4 sets / 5V 10kΩ pull up
Output 2 sets / Relay output, max. 2A DC 30V / 0.5A AC 125V
Alarm Reaction Preset / Sequence / Auto Pan / Cruise

User’s Manual
18
General
Environment Indoor / Outdoor
Controller Interface RS-485
Operating Temperature
Indoor 0°C ~ 40°C (32°F ~ 104°F)
Outdoor
- 40°C ~ 50°C (- 40°F ~ 122°F)
Dimension Indoor
∅
171.7 x 228.7 mm
∅
6.7 x 9 in.)
Outdoor
∅
191.9 x 382.1 mm (
∅
7.5 x 11.1 in.) w / Sunshield
Weight Indoor 1.6 kg (3.57 lb)
Outdoor
2.3 kg (5.11 lb)
Power Source Indoor AC 24V ± 10%
Outdoor
AC 24V ± 10%
Power Consumption Indoor 20 W
Outdoor
50 W (w / Heater)
Regulatory CE / FCC / RoHS / IP66 (Outdoor)

User’s Manual
19
Appendix B: Switch Settings Index Table
Please refer to the switch settings below for Mini Speed Dome Camera’s ID and protocol
setup.
Camera ID Setup
ID No.
SWITCH SETTING
SW-1 SW-2 SW-3 SW-4 SW-5 SW-6 SW-7 SW-8 SW-9 SW-10
0 OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF
1 ON OFF OFF OFF OFF OFF OFF OFF OFF OFF
2 OFF ON OFF OFF OFF OFF OFF OFF OFF OFF
3 ON ON OFF OFF OFF OFF OFF OFF OFF OFF
4 OFF OFF ON OFF OFF OFF OFF OFF OFF OFF
5 ON OFF ON OFF OFF OFF OFF OFF OFF OFF
6 OFF ON ON OFF OFF OFF OFF OFF OFF OFF
7 ON ON ON OFF OFF OFF OFF OFF OFF OFF
8 OFF OFF OFF ON OFF OFF OFF OFF OFF OFF
9 ON OFF OFF ON OFF OFF OFF OFF OFF OFF
10 OFF ON OFF ON OFF OFF OFF OFF OFF OFF
11 ON ON OFF ON OFF OFF OFF OFF OFF OFF
12 OFF OFF ON ON OFF OFF OFF OFF OFF OFF
13 ON OFF ON ON OFF OFF OFF OFF OFF OFF
14 OFF ON ON ON OFF OFF OFF OFF OFF OFF
15 ON ON ON ON OFF OFF OFF OFF OFF OFF
16 OFF OFF OFF OFF ON OFF OFF OFF OFF OFF
17 ON OFF OFF OFF ON OFF OFF OFF OFF OFF
18 OFF ON OFF OFF ON OFF OFF OFF OFF OFF
19 ON ON OFF OFF ON OFF OFF OFF OFF OFF
20 OFF OFF ON OFF ON OFF OFF OFF OFF OFF
21 ON OFF ON OFF ON OFF OFF OFF OFF OFF
22 OFF ON ON OFF ON OFF OFF OFF OFF OFF
23 ON ON ON OFF ON OFF OFF OFF OFF OFF
24 OFF OFF OFF ON ON OFF OFF OFF OFF OFF
25 ON OFF OFF ON ON OFF OFF OFF OFF OFF
26 OFF ON OFF ON ON OFF OFF OFF OFF OFF
27 ON ON OFF ON ON OFF OFF OFF OFF OFF
28 OFF OFF ON ON ON OFF OFF OFF OFF OFF
29 ON OFF ON ON ON OFF OFF OFF OFF OFF
30 OFF ON ON ON ON OFF OFF OFF OFF OFF