Dynavin DVN UFT02 User manual

www.dynavin.de
DVN UFT02DVN UFT02
Installation GuideInstallation Guide
CAN-bus adapter DVN UFT02
CAN-bus adapter for remote control of the most important functions of a
Dynavin radio via steering wheel buttons, if present in the vehicle.
• Supports multifunction steering wheel
• Synchronisation of time
• Synchronisation of language menu
• For Fiat Ducato 2014-today
• For vehicles that were delivered from the factory with the Fiat radio from the
factory
• Infotainment steering wheel adapter
• Control via the steering wheel buttons

www.dynavin.de 2
DVN UFT02 Installation Guide
Scope of delivery
For use in Citroen / Fiat depending on the original radio
Camera cable
supplied loose
Connect if
necessary
Plugged in: 1 and 2
Fiat: do not connect
(leave empty)
Citroen:
Plug cable in 1 and 4
State of delivery:
Cable is loose
Connect cable

www.dynavin.de 3
DVN UFT02 Installation Guide
For use in Fiat with DCX without OBD box
For use in Fiat with DCX with OBD box
OBD box
Do not use
this cable
Connect cable

DVN UFT02 Installation Guide
Rev. 2.0
Dynavin GmbH
Siemensstr. 7
76316 Malsch
Germany
E-Mail: inf[email protected]
© 2021 Dynavin GmbH
All rights reserved.
Reprinting and reproduction, even in part, is prohibited.
The characteristics of the products are correct at the time of creation of the printed product.
The colour of the products may vary.
We accept no liability for any typesetting errors.
Check with your dealer whether the actual specifications meet your requirements.
We reserve the right to make changes.