Dynex DX-S1000 User manual
USER GUIDE
GUIDE DE L’UTILISATEUR • GUÍA DEL USUARIO
Car Audio Speakers
Haut-parleurs pour l’auto
Altavoces para audio de automóvil
DX-S1000
DX-S1000.fm Page 1 Saturday, January 13, 2007 11:01 PM
2Contents
Dynex DX-S1000
Car Audio Speakers
Contents
Introduction ......................................................................................2
Important safety instructions............................................................2
Setting up the car audio speakers......................................................2
Legal notice.......................................................................................4
Warranty ...........................................................................................5
Français .................................................... 7
Español....................................................12
Introduction
Thank you for purchasing the DX-S1000 Car Audio Speakers. Although Dynex has attempted
to make sure all of the information contained within this manual is accurate, please be aware
that any part of it is subject to change without notice.
Important safety instructions
Setting up the car audio speakers
This symbol alerts the user to the presence of important
instructions. Failure to heed these instructions can result in injury
or damage to the speakers.
If you feel unsure about installing this system yourself, have it
installed by a qualified audio technician.
Before installation, disconnect the battery negative (-) terminal to
prevent damage to the speakers, fire and/or possible injury.
The following are basic installation instructions. If you feel unsure
about personally installing this speaker system, Dynex
recommends using the services of aprofessional car audio
installation center.
DX-S1000.fm Page 2 Saturday, January 13, 2007 11:01 PM
Mounting the car audio speakers 3
Before installation, follow these guidelines:
1Carefully read and understand the instructions before installing this product.
2Disconnect the negative terminal from the battery before installing thisproduct.
3If additional wiring is needed, we recommend running all wires prior to mounting
your speaker in place.
4Use thehighest quality connectorsfor a reliable installation and to minimize signal or
power loss.
5Use caution before you drill or cut. Be careful not to cut or drill into gas tanks, fuel
lines, brake or hydraulic lines, vacuum lines or electrical wiring when working on any
vehicle.
6Never run speaker wires underneath your vehicle. Running speaker wires inside the
vehicle provides the best protection from exhaust heat and environmental elements.
7Avoid running wires over, near, or through sharp edged surfaces. Use rubber grommets
to protect any wires routed through metal, especially the firewall.
8When running the speaker cable from the amplifier, avoid running it near sources of
high current (i.e. wiring harnesses, battery cables).
Mounting the car audio speakers
To mount the car audio speakers:
1Determine where the speakers will be mounted. Make sure the area is large enough
forthe speaker to mount evenly and deepenough for the speaker to fit.
2Refer to the specification chart on the following page to determine the proper
diameter hole tocut for yourspeaker model.
3If supplied, use the plastic mounting ring as a template to mark the locations for the
mounting screws.
4Drill the holes witha 1/8" bit.
5Be sure to observe proper polarity when connecting the wires. The speaker's positive
terminal is indicated with a "+".
Standard rear
deck installation
Standard door
installation
Mounting
ring Speaker Mounting
hole cut-out
Grille
Grille Mounting
ring Speaker Mounting
hole cut-out
DX-S1000.fm Page 3 Saturday, January 13, 2007 11:01 PM
4Legal notice
6Fit thering and speaker to the cutout.Mount themusingthe enclosed screws. If
supplied, fit the grille inside the ring and press gently, but firmly, into place.
The diagram featured above is to be used in conjunction with the specifications guide below:
Legal notice
Copyright
© 2006 Dynex. DYNEX and the DYNEX logo are trademarks of Best Buy Enterprise Services,
Inc. Other brands and product names are trademarks or registered trademarks of their
respective holders.Specifications and features are subject to change without notice or
obligation.
For service and support call (800) 305-2204.
Specification Measurement
Mounting height 7/16
Top-mounting depth 2 ¼
Tweeter protrusion ¼
Bottom-mounting depth 2 11/16
Cut-out diameter 5 ½
Sensitivity (dB) 86
Frequency response 80-20 K
Recommended power (watts RMS) 60
Peak power handling (watts IPP) 120
Grille (yes or no) Yes
Cut-out diameter
Top-mounting depth Bottom-mounting depth
Mounting height Tweeter protrusion
DX-S1000.fm Page 4 Saturday, January 13, 2007 11:01 PM
Warranty 5
Warranty
90 Day Limited Warranty
Dynex Products (“Dynex”) warrants to you, the original purchaser of this new car audio
speakers (“Product”), that the Product shall be free of defects in the original manufacture
of the material or workmanship for a period of 90 days from the date of your purchase of
the Product (“Warranty Period”). This Product must be purchased from an authorized
dealer of Dynex brand products and packaged with this warranty statement. This warranty
does not cover refurbished Product. If you notify Dynex during the Warranty Period of a
defect covered by this warranty that requires service, terms of this warranty apply.
HOW LONG DOES THE COVERAGE LAST?
The Warranty Period lasts for 90 days from the date you purchased the Product. The
purchase date is printed on the receipt you received with the product.
WHAT DOES THIS WARRANTY COVER?
During the Warranty Period, if the original manufacture of the material or workmanship of
the Product is determined to be defective by an authorized Dynex repair center or store
personnel, Dynex will (at its sole option): (1) repair the Product with new or rebuilt parts; or
(2) replace the Product at no charge with new or rebuilt comparable products or parts.
Products and parts replaced under this warranty become the property of Dynex and are
not returned to you. If service of Products and parts are required after the Warranty Period
expires, you must pay all labor and parts charges. This warranty lasts as long as you own
your Dynex Product during the Warranty Period. Warranty coverage terminates if you sell
or otherwise transfer the Product.
HOW TO OBTAIN WARRANTY SERVICE?
If you purchased the Product at a retail store location, take your original receipt and the
Product to the store you purchased it from. Make sure that you place the Product in its
original packaging or packaging that provides the same amount of protection as the
original packaging. If you purchased the Product from an online web site, mail your
original receipt and the Product to the address listed on the web site. Make sure that you
put the Product in its original packaging or packaging that provides the same amount of
protection as the original packaging.
WHERE IS THE WARRANTY VALID?
This warranty isvalid only to the originalpurchaser of the Product inthe United States and
Canada.
WHAT DOES THE WARRANTY NOT COVER?
This warranty does not cover:
•
Customer instruction
•
Installation
•
Set up adjustments
•
Cosmetic damage
•
Damage due to acts of God, such as lightning strikes
•
Accident
•
Misuse
•
Abuse
•
Negligence
•
Commercial use
•
Modification of any part of the Product
This warranty also does not cover:
•
Damage due to incorrect operation or maintenance
•
Connection to an incorrect voltage supply
DX-S1000.fm Page 5 Saturday, January 13, 2007 11:01 PM
Table of contents
Languages:
