E-LITES 1240Zoom User manual

1
12*40W 4in1 Zoom led Bar
USER MANUEL
User Manual
KEEP THIS MANUAL FOR FUTURE NEEDS

2
Unpacking
Thank you for choosing 1240Zoom Led Mover. For your own safety, please read this manual before installing the
device. This manual covers the important information on installation and applications. Please install and operate the
fixture with following instructions. Meanwhile, please keep this manual well for future needs.
LED740zoom is made of a new type of high temperature strength of engineering plastics and cast aluminum casing
with nice outlook. The fixture is designed and manufactured strictly following CE standards, complying with international
standard DMX512 protocol. It’s available independently controlled and linkable with each other for operation. And it is
applicable for large-scale live performances, theater, studio, nightclubs and discos.
4-IN-1 LEDs(RGBW) which features high brightness and stability. Please carefully unpack it when you receive the
fixture and check whether it is damaged during the transportation. And please check whether the following items are
included inside the box:
Lamp---------One Signal Cable----One
Hanging Bracket-------Two Power Cable----One
User Manual----One
Specifications
Item number:ELB-12X40W
Power Supply: AC 90-260V, 50/60Hz
LED : 12PCS *40W RGBW 4IN1 LED
Dimmer:0-100% linear dimmer
Zoom range 3-40°
Two independent zoom zones
Tilt moving angle: 90°/16bit
Strobe: 1-25Hz
Life Span: 100000hrs
Control Mode: DMX512, master-slave, sound, auto
DMX Channels:21/52/62/16CHs
Display: LCD Menu Display
Power :PowerCon connection in & out
DMX : 3pin or 5pin in & out
Protect Rate: IP20
Housing: Cast aluminum
N. W.: 15 kg
G. W.: 17kg
Dimension: 1020*100*300mm
Carton package: 1100*180*355mm
Key Features
40W high power Leds installed.

3
High efficient optical lens systerm.
3-40degree wide zoom range.
Nice beam effect & Nice wash effect.
Color: RGBW mixture
Dimmer: 0-100% linear dimming system
Display: LCD Menu Display
Protection: Auto temperature control system with big cooling fan.
Quiet, smooth and fast PAN/TILT movement
Low noise and efficient FAN cooling system
Built-in pre-programs with macro effects.
POWERCON power connector
45℃max ambient temperature
IP20 protection rating
3&5-Pin XLR DMX input/output
LED rainbow effect.
Perfectly suitable for stage, theatre, TV studio, rental, DISCO and more
Maintenance and Cleaning
The following points have to be considered during the inspection:
1. All screws for installing the devices or parts of the device have to be tightly connected and must not be corroded. 2.
There must not be any deformations on the housing, color lenses, fixations and installation spots (ceiling, suspension,
trussing). 3. Mechanically moved parts must not show any traces of wearing and must not rotate with unbalances. 4.
The electric power supply cables must not show any damage, material fatigue or sediments.
Further instructions depending on the installation spot and usage have to be adhered by a skilled installer and any safety
problems have to be removed.
In order to make the lights in good condition and extend the life time, we suggest a regular cleaning to the lights.
1) Clean the inside and outside lens each week to avoid the weakneness of the lights due to accumulation of dust.
2) Clean the fan each week.
3) A detailed electric check by approved electrical engineer each three month, make sure that the circuit contacts are
in good condition, prevent the poor contact of circuit from overheating.
We recommend a frequent cleaning of the device. Please use a moist, lint- free cloth. Never use alcohol or
solvents.There are no serviceable parts inside the device. Please refer to the instructions under “Installation
instructions”.Should you need any spare parts, please order genuine parts from your local dealer.
Safety Instructions
This device has left the factory in perfect condition. In order to maintain this condition and to ensure a safe operation, it
is absolutely necessary for the user to follow the safety instructions and warning notes written in this user manual.
If the device has been exposed to temperature changes due to environmental changes, do not switch it on immediately.
The arising condensation could damage the device. Leave the device switched off until it has reached room

4
temperature.
This device falls under protection-class I. Therefore it is essential that the device be earthed.
The electric connection must carry out by qualified person.
The device shall only be used with rate voltage and frequency.
Make sure that the available voltage is not higher than stated at the end of this manual.
Make sure the power cord is never crimped or damaged by sharp edges. If this would be the case, replacement of the
cable must be done by an authorized dealer.
Always disconnect from the mains, when the device is not in use or before cleaning it. Only handle the power cord by the
plug. Never pull out the plug by tugging the power cord.
During initial start-up some smoke or smell may arise. This is a normal process and does not necessarily mean that the
device is defective, it should decrease gradually.
Please don't project the beam onto combustible substances.
Fixtures cannot be installed on combustible substances, keep more than 50cm distance with wall for smooth air flow, so
there should be no shelter for fans and ventilation for heat radiation.
If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or
his service agent or a similar qualified person in order to avoid a hazard.
Operation Instructions
-The moving head is for wash & Beam effect for on-site decoration purpose.
-Don’t turn on the fixture if it’s been through severe temperature difference like after transportation because it might
damage the light due to the environment changes. So make sure to operate the fixture until it is in normal temperature.
-This light should be keep away from strong shaking during any transportation or movement.
-Don’t pull up the light by only the head, or it might cause damages to the mechanical parts.
-Don’t expose the fixture in overheat, moisture or environment with too much dust when installing it. And don’t lay any
power cables on the floor. Or it might cause electronic shock to the people.
-Make sure the installation place is in good safety condition before installing the fixture.
-Make sure to put the safety chain and check whether the screws are screwed properly when installing the fixture.
-Make sure the lens are in good condition. It’s recommended to replace the units if there are any damages or severe
scratch.
-Make sure the fixture is operated by qualified personnel who knows the fixture before using.
-Keep the original packages if any second shipment is needed.
-Don’t try to change the fixtures without any instruction by the manufacturer or the appointed repairing agencies.
-It is not in warranty range if there are any malfunctions from not following the user manual to operate or any illegal
operation, like shock short circuit, electronic shock, lamp broke, etc.
DMX-512 control connections
Connect the provided XLR cable to the female 3-pin XLR output of your controller and the other side to the male 3-pin
XLR input of the moving head. You can chain multiple
Moving heads be connected together through serial linking. The cable needed should be two core, screened cable with
XLR input and output connectors. Please refer to the diagram below.
DMX-512 connection with DMX terminator

5
For installations where the DMX cable has to run a long distance or is in an electrically noisy environment, such as in a
discotheque, it is recommended to use a DMX terminator. This helps in preventing corruption of the digital control signal
by electrical noise. The DMX terminator is simply an XLR plug with a 120 Ω resistor connected between pins 2 and
3,which is then plugged into the output XLR socket of the last fixture in the chain. Please see illustrations below.
1
2
3
PIN 3
PIN 2
120Ω
Display chart
12x40w zoom bar
Version：V1.00
Address
1-512
RUN
DMX512
Auto
Sound
DMX MODE
CH16
CH21
CH52
CH64
TEST
ALL
SET
DISPLAY
No/Yes
Signal Keep
No/Yes
Slave
No/Yes
INFO
Version
Vx.xx
Tilt
ZOOM1
ZOOM2
MANUAL
Red
Green
Blue
Strobe
RESET
All Reset
No/Yes

6
DMX channel(16/64/21/52CH)
16CH
Function
DMX Value
Description
1
Tilt
0-255
0-100%
2
Tilt Fine
0-255
0-100%
3
Zoom1
0-255
0-100%
4
Zoom2
0-255
0-100%
5
Dimmer
0-255
0-100%
6
Strobe
0-19
No Effect
20-255
Strobe slow to fast
7
Red
0-255
0-100%
8
Green
0-255
0-100%
9
Blue
0-255
0-100%
10
White
0-255
0-100%
11
Color Macro
0-10
No Function
11-30
R 100%,G 50-100-50%,B 0
31-50
R 100%-0,G 100%, B,0
51-70
R 0,G 100%,B 0-100%
71-90
R 0,G 100%-0,B 100%
91-110
R 0-100%, G 0, B 100%
111-130
R 100%,G 0, B 100%-0
131-150
R 100% ,G 0-100% ,B 0-100%
151-170
R 100%-0 , G 100%-0 , B 100%
171-200
R 100%,G 100%, B 100%
201-205
Color 1
206-210
Color 2
211-215
Color 3
216-220
Color 4
221-225
Color 5
226-230
Color 6
231-235
Color 7
236-240
Color 8
241-245
Color 9
246-250
Color 10
251-255
Color 11

7
12
Foreground Dimmer
0-255
0-100%
13
Background
0-10
No Function
11-255
Background Color
14
Background Dimmer
0-255
0-100%
15
Show
0-10
No Function
11-15
Show1
16-20
Show2
21-25
Show3
26-30
Show4
31-35
Show5
36-40
Show6
41-45
Show7
46-50
Show8
51-55
Show9
56-60
Show10
61-65
Show11
66-70
Show12
71-75
Show13
76-80
Show14
81-85
Show15
86-90
Show16
91-95
Show17
96-100
Show18
101-105
Show19
106-110
Show20
111-115
Show21
116-120
Show22
121-125
Show23
126-130
Show24
131-135
Show25
136-140
Show26
141-145
Show27
146-150
Show28
151-155
Show29
156-160
Show30

8
161-165
Show31
166-170
Show32
171-175
Show33
176-180
Show34
181-185
Show35
186-190
Show36
191-195
Show37
196-200
Show38
201-205
Show39
206-210
Show40
211-215
Show41
216-220
Show42
221-235
Show43
236-245
Sound1
246-255
Sound2
16
Show Speed
0-127
Show Speed Slow to Fast &XY
128-254
Show Speed Slow to Fast
255
reset
64CH
Function
DMX Value
Description
1
Tilt
0-255
0-100%
2
Tilt Fine
0-255
0-100%
3
Zoom1
0-255
0-100%
4
Zoom2
0-255
0-100%
5
Dimmer
0-255
0-100%
6
Strobe
0-19
No Effect
20-255
Strobe slow to fast
7
Red
0-255
0-100%
8
Green
0-255
0-100%
9
Blue
0-255
0-100%
10
White
0-255
0-100%
11
Color Macro
0-10
No Function
11-30
R 100%,G 50-100-50%,B 0
31-50
R 100%-0,G 100%, B,0
51-70
R 0,G 100%,B 0-100%

9
71-90
R 0,G 100%-0,B 100%
91-110
R 0-100%, G 0, B 100%
111-130
R 100%,G 0, B 100%-0
131-150
R 100% ,G 0-100% ,B 0-100%
151-170
R 100%-0 , G 100%-0 , B 100%
171-200
R 100%,G 100%, B 100%
201-205
Color 1
206-210
Color 2
211-215
Color 3
216-220
Color 4
221-225
Color 5
226-230
Color 6
231-235
Color 7
236-240
Color 8
241-245
Color 9
246-250
Color 10
251-255
Color 11
12
Foreground Dimmer
0-255
0-100%
13
Background
0-10
No Function
11-255
Background Color
14
Background Dimmer
0-255
0-100%
15
Show
0-10
No Function
11-15
Show1
16-20
Show2
21-25
Show3
26-30
Show4
31-35
Show5
36-40
Show6
41-45
Show7
46-50
Show8
51-55
Show9
56-60
Show10
61-65
Show11
66-70
Show12
71-75
Show13

10
76-80
Show14
81-85
Show15
86-90
Show16
91-95
Show17
96-100
Show18
101-105
Show19
106-110
Show20
111-115
Show21
116-120
Show22
121-125
Show23
126-130
Show24
131-135
Show25
136-140
Show26
141-145
Show27
146-150
Show28
151-155
Show29
156-160
Show30
161-165
Show31
166-170
Show32
171-175
Show33
176-180
Show34
181-185
Show35
186-190
Show36
191-195
Show37
196-200
Show38
201-205
Show39
206-210
Show40
211-215
Show41
216-220
Show42
221-235
Show43
236-245
Sound1
246-255
Sound2
16
Show Speed
0-127
Show Speed Slow to Fast &XY
128-254
Show Speed Slow to Fast
255
reset

11
17
White1
0-255
0-100%
:
21CH
Function
DMX Value
Description
1
Tilt
0-255
0-100%
2
Tilt Fine
0-255
0-100%
3
Zoom1
0-255
0-100%
4
Zoom2
0-255
0-100%
5
Dimmer
0-255
0-100%
6
Strobe
0-19
No Effect
20-255
Strobe slow to fast
7
1 Color Select
0-10
No Function
11-25
Red
24-40
Green
41-55
Blue
56-70
White
71-85
R +G
86-100
R+B
101-115
G+B
116-130
R+W
131-145
G+W
146-160
B+W
161-175
R+G+W
176-190
R+B+W
191-205
G+B+W
206-255
R+G+B+W
：
18
12 Color Select
0-10
No Function
11-25
Red
24-40
Green
41-55
Blue
56-70
White
71-85
R +G
86-100
R+B
101-115
G+B

12
116-130
R+W
131-145
G+W
146-160
B+W
161-175
R+G+W
176-190
R+B+W
191-205
G+B+W
206-255
R+G+B+W
19
Background Dimmer
0-255
0-100%
20
Show
0-10
No Function
11-15
Show1
16-20
Show2
21-25
Show3
26-30
Show4
31-35
Show5
36-40
Show6
41-45
Show7
46-50
Show8
51-55
Show9
56-60
Show10
61-65
Show11
66-70
Show12
71-75
Show13
76-80
Show14
81-85
Show15
86-90
Show16
91-95
Show17
96-100
Show18
101-105
Show19
106-110
Show20
111-115
Show21
116-120
Show22
121-125
Show23
126-130
Show24
131-135
Show25
136-140
Show26

13
141-145
Show27
146-150
Show28
151-155
Show29
156-160
Show30
161-165
Show31
166-170
Show32
171-175
Show33
176-180
Show34
181-185
Show35
186-190
Show36
191-195
Show37
196-200
Show38
201-205
Show39
206-210
Show40
211-215
Show41
216-220
Show42
221-225
Show43
226-230
Show44
231-235
Show45
236-245
Sound1
246-255
Sound2
21
Show Speed
0-127
Show Speed Slow to Fast &XY
128-254
Show Speed Slow to Fast
255
reset
52CH
Function
DMX Value
Description
1
Tilt
0-255
0-100%
2
Tilt Fine
0-255
0-100%
3
Zoom1
0-255
0-100%
4
Zoom2
0-255
0-100%
5
Red1
0-255
0-100%
6
Green1
0-255
0-100%
7
Blue1
0-255
0-100%
8
White1
0-255
0-100%

14
9
Red2
0-255
0-100%
10
Green2
0-255
0-100%
11
Blue2
0-255
0-100%
12
White2
0-255
0-100%
…
……
…
…