Eagle Group HFL-5000 User manual

ASSEMBLY INSTRUCTIONS
HFL - 5000 Handwashing System
CAUTION
IN PECT CONTENT IMMEDIATELY AND FILE CLAIM WITH DELIVERING CARRIER FOR ANY DAMAGE.
SAVE YOUR BOX AND ALL PACKING MATERIALS.
YOU ARE RE PON IBLE FOR DAMAGE TO YOUR UNIT IF RETURNED IMPROPERLY PACKED.
PART #352863
EG10048 Revised 06/10
Eagle Foodservice Equipment, Eagle MHC, pecFAB®, and Retail Display are divisions of Eagle Group. ©2010 by the Eagle Group
• 100 Industrial Boulevard, Clayton, Delaware 19938-8903 U.S.A. • www.eaglegrp.com
• Phone: [phone] • (Foodservice) 800/ 1-8 0 • (MHC/Retail) 800/637-5100
• Fax: [phone]
Please note before assembly:
• Determine where you want to install the system. Make sure to leave
enough wall space to accommodate all components.
• For plumbing rough-ins, refer to instructions packed with hand sink.
(continued on Page )
•Eagle Group hand sink
•T&S®electronic-eye faucet
•PURELL®hand sanitizing dispenser
•GOJO®hand soap dispenser
•San Jamar electronic paper towel
dispenser
•FoodHandler®glove rack
•Tucel nail brush
Parts List
(SIDE VIEW)(FRONT VIEW)
shor 90˚
elbow
30˝-long
flexible
s ainless
s eel hose
24˝ sensor cable
spou
(lock washer removal
conver s o swivel ac ion)
elec ronic-eye
housing
wall-moun able
con rol module
(AC/DC)
144˝-long
power cord
and AC
adap er
(2) 18˝ flexible
s ainless s eel
hoses ( o wa er
supply lines)
*LOCATION OF WATER INLET ROUGH-IN RECOMMENDED TO BE WITHIN AREA OF SINK BODY, ABOVE P-TRAP.
*
mixing valve
Details f Electr nic-Eye Faucet

Eagle Foodservice Equipment, Eagle MHC, pecFAB®, and Retail Display are divisions of Eagle Group. ©2010 by the Eagle Group
• 100 Industrial Boulevard, Clayton, Delaware 19938-8903 U.S.A. • www.eaglegrp.com
• Phone: [phone] • (Foodservice) 800/ 1-8 0 • (MHC/Retail) 800/637-5100
• Fax: [phone]
ASSEMBLY INSTRUCTIONS
#HFL - 5000 Handwashing System
(End)
Step 1: Attach faucet to hand sink,
per faucet instructions.
Step : Assemble hand sink to wall,
per instructions packed with
hand sink.
fauce
hand
sink
34˝
recommended
working heigh
Step 3: Attach remaining
components to wall,
arranging in desired
configuration.
(Note: Each component has its
own instructions. Follow carefully
for mounting to wall.)