Eagle Double Gowning Rack User manual

#5
acorn
nuts
#2
screws
PART #317309
EG9881 Revised 06/08
figure 2.2
ASSEMBLY INSTRUCTIONS
Double Gowning Rack
Eagle Foodservice Equipment, Eagle MHC, SpecFAB, and Retail Display are divisions of Eagle Group. ©2008 by the Eagle Group
• 100 Industrial Boulevard, Clayton, Delaware 19938-8903 U.S.A. • www.eaglegrp.com
• Phone: [phone] • (Foodservice) 800/441-8440 • (MHC/Retail) 800/637-5100
• Fax: [phone]
CAUTION
INSPECT CONTENTS IMMEDIATELY AND FILE CLAIM WITH DELIVERING CARRIER FOR ANY DAMAGE.
SAVE YOUR BOX AND ALL PACKING MATERIALS. YOU ARE RESPONSIBLE FOR DAMAGE TO
YOUR UNIT IF RETURNED IMPROPERLY PACKED.
Step 1 - Attach glides to post assemblies.
Mount adjustable static proof stem glides to bottom of
post assemblies (two glides per assembly).
Mount bottom horizontal support bar to both
post assemblies with #3 bolts.
Step 2 - Attach bottom horizontal support bar to post assemblies.
Slide on dust covers as shown in
figure 2.1 and figure 2.2 . Assemble using #2 screws
and #5 acorn nuts.
vertical post
assembly
bottom horizontal
support bar
vertical post
assembly
#4 glides
figure 2.1
dust cover
component
dust cover
lid
(continued on page 2)
Fasteners
item # quantity description
#1 . . . . . . . . . . * . . . . . . . . . 1 ⁄4˝-20 x 1 ⁄2˝ Screw
#2 . . . . . . . . . . 8. . . . . . . . . 1 ⁄4˝-20 x 13 ⁄4˝ Screw
#3 . . . . . . . . . 12 . . . . . . . . 3 ⁄8˝-16 x 7 ⁄8˝ Bolt
#4 . . . . . . . . . . 4. . . . . . . . . 3 ⁄8˝ Stem Glide
#5 . . . . . . . . . . * . . . . . . . . . 1 ⁄4˝ Acorn Nut
#6 ** . . . . . . . . 8. . . . . . . . . 1 ⁄4˝ Black Plug **
Tools required for assembly:
slotted screwdriver, 3⁄8˝ socket wrench, and 9⁄16˝ open-end wrench.
* 8 for removable-hanger models, 16 for nonremovable-hanger models.
** For removable-hanger models only (see Step 5)
#1 #2 #3
#4
#5 #6

ASSEMBLY INSTRUCTIONS
Double Gowning Rack
Eagle Foodservice Equipment, Eagle MHC, SpecFAB, and Retail Display are divisions of Eagle Group. ©2008 by the Eagle Group
• 100 Industrial Boulevard, Clayton, Delaware 19938-8903 U.S.A. • www.eaglegrp.com
• Phone: [phone] • (Foodservice) 800/441-8440 • (MHC/Retail) 800/637-5100
• Fax: [phone]
figure 5.1
Step 5 - Install hangers.
Insert hangers into each hanger rail as shown in figure 5.1 and figure 5.2 .
Optional outer hanger rail cover
Slide optional outer hanger rail cover over each hanger rail, and install using #1 screws and #5 acorn nuts.
Tighten #3 bolts.
If removable-hanger gowning rack was ordered, fill remaining holes on each hanger rail with #6 plugs,
then tighten #3 bolts (mentioned in Step 3) to complete assembly. Otherwise, refer to instructions below.
post
assembly
hanger rail #3 bolt
side of hanger rail
with louver
side of hanger rail
with hole
hanger
hanger
rail
Step 3 - Attach hanger rails.
On each side, attach hanger rail using #3 bolts. Do not tighten
bolts yet. Repeat on remaining side.
Step 4 - Attach top horizontal support bar.
Repeating Step 2, mount top bar and dust cover assemblies.
#5 acorn nut
#3 bolt
#1
screw
outer
hanger rail
cover
inner
hanger rail
figure 5.2
top horizontal
support bar
(End)