Eagle Modular Bag-n-Box User manual

ASSEMBLY INSTRUCTIONS
Modular Bag–n–Box
EG9977 Revised 09/23
Note: Quantities of components vary, depending on order.
CAUTION
INSPECT CONTENTS IMMEDIATELY AND FILE CLAIM WITH DELIVERING
CARRIER FOR ANY DAMAGE. SAVE YOUR BOX AND ALL PACKING MATERIALS.
YOU ARE RESPONSIBLE FOR DAMAGE TO YOUR UNIT IF RETURNED IMPROPERLY PACKED.
shelf
shelf
split sleeve
front ledge
post
slanted shelf
Step 2 - Assemble bottom shelf.
split
sleeves
bottom
shelf
split
sleeve
post
Step 1 - Attach split sleeves
(for bottom shelf) to posts.
Note: the wider part of the taper
goes toward the bottom.
split
sleeve
shelf
collar
post
Eagle Foodservice Equipment, Eagle MHC, and SpecFAB®are divisions of Eagle Group. ©2023 by the Eagle Group
• 100 Industrial Boulevard, Clayton, Delaware 19938-8903 U.S.A.
• Phone: [phone] • 800/441-8440
• Fax: [phone] • www.eaglegrp.com
INSTRUCTION SHEET
#A218844
(continued on back page)

Step 3 - Assemble slanted shelf.
Note: Assemble the rear split
sleeves 2 grooves higher than
the front split sleeves.
Assembly is complete.
split
sleeve
shelf
collar
post
Step 4 - Add front ledge to the slanted shelf.
Step 5 - Assemble top shelf.
ASSEMBLY INSTRUCTIONS
Modular Bag–n–Box
(End)
Eagle Foodservice Equipment, Eagle MHC, and SpecFAB®are divisions of Eagle Group. ©2023 by the Eagle Group
• 100 Industrial Boulevard, Clayton, Delaware 19938-8903 U.S.A.
• Phone: [phone] • 800/441-8440
• Fax: [phone] • www.eaglegrp.com
front
ledge
post
slanted
shelf
split
sleeve
shelf
collar
post