
Once installed, the product cannot be detached. Please strictly follow each
step in the installation manual.
• Please check all parts and components to ensure that there are no damages
or missing items before starting the construction of the product. If you have
any problems or discover any missing parts, please contact customer service
at support@eastoak.com
• Some parts may contain sharp edges. Wear protective gloves if necessary
during assembly.
• When using power tools, please adjust the gear to the minimum, otherwise it
will cause damage to the parts.
• DO NOT assemble this item alone for your safety. Two people are necessary
for smooth and safe installation.
• Item identication: For ease of identication, all parts are labeled to
correspond to the step number in which the part is used.
• Check all panels for tightness before usage.
• It is of utmost importance to assemble all parts according to the directions.
Do not skip any step.
• In case of re, do not attempt to extinguish any burning polypropylene with water.
• Wear safety goggles and always follow the manufacturer’s instructions when
using power tools.
• Using a stiff brush or abrasive cleaner could damage the box.
• After rain, wipe the box with cloth before opening.
• Do not stand on the lid.
• To prevent the risk of suffocation, do not allow children to play inside the box.
• Exercise caution when moving fully loaded product. This product is not
intended for transporting heavy objects.
IMPORTANT CAUTION
ASSEMBLY INSTRUCTIONS
CARE & SAFETY
PARTS LIST
B (X2)
(X1)
C (X2)
M (X2)
Upper Cover Board
Base
Left and Front
Side Boards
Right and Front
Side Boards
Rear Side Board
Connection Buckling StripInternal Reinforcing Rib
Movable Cleaning Tray
(X1)D1
(X1)
(X2) (X1) (X1)
P
G+A G+A
A+Logo
J+K1