EastPoint Belvidere 32103 User manual

ITEM# 1-1-32103
Olt / 2.441n BILLIARD TABLE
with DARTBOARD and CUE RACK
Assembly Instructions
Model # 32103
www.eastpointsports.com
TWO OR MORE ADULTS REQUIRED FOR ASSEMBLY

IMPORTANT
-
Lay out all parts before you begin
Please review the parts identifier and make sure that you have all parts before beginning assembly.
If any questions or issues, please contact us at 1-973-585-4747 BEFORE returning the product to the original place
of purchase.
Please keep your original sales receipt. Staple it on the adjacent page in the space provided for future reference/use.
it will be required to receive service help or parts under warranty.
CONTACT INFO|
| Hours Technical Support or Replacement Parts
| Monday to Friday Emailusat: [email protected]
(9:00am to 5pm EST) | Visit us at: www.eastpointsports.com
Call: 973-585-4747

BEFORE BUILDING -
Please inspect your playfield
Your Cabinet (Billiard table Playfield) is NOT replaceable. Any damage that exists to your playfield is not
reparable under warranty. If your playfield is damaged, the entire game must be returned to the original
place of purchase for an exchange.
Please attach
It will be required to receive service help or parts under warranty.
i
i
i
RECEIPT HERE ,
i
i

TOOLS
Required
« 1- Phillips Head Screwdriver « Electric Screwdriver or Power Driver
(Standard Size) — Not Included CAUTION - DO NOT OVER TIGHTEN. Over Tightening
will result in irreparable damage to the product. If using,
please make sure that the tool is set to a very low torque
to prevent damage to the product.
¢ 1-Flat Head Screwdriver
(Standard Size) — Not Included
e 1 -Wrench - Included - Socket Wrench Set
How to use the: Instructions Parts ID #
PARTS IDENTIFIER , ore
Part Name-~
_- Part Image
Before you begin assembly, please make sure that 1 g
you have all the parts listed and in the correct
quantities. This will ensure the quickest and most
organized assembly.
Part Quantity
Be sure to work on the assembly on a soft a
non-marring surface such as carpet or the inside of
the corrugate box top to prevent causing damage Item #7
to the table surface during assembly.
*s Step Used In
PARTS IDENTIFIER
Components
Support - Bar Leg Panel - Groove Leg Top
# 32103-O1ES # 32103-O02ES # 32103-03ES
Side Cabinet
# 32103-06ES
Leg Base Corner Brace
LY
# 32103-04ES # 32103-O5ES

Components cont.
End Cabinet
# 32103-07ES
Main Cabinet
# 32103-O08ES
Sa
Shim - Imm
C5
# 32101-11ES
STEP #8
Shim - 2mm
C2
#32101-12ES
STEP #8
Pocket Corner (Pre-Installed)
(5%
660
# 32103-13ES
PRE-INSTALLED
Shim - 3mm
#32101-13ES
STEP #8
——_
Pocket Side (Pre-Installed)
# 32103-12ES
PRE-INSTALLED

Hardware
6.5 x 35mm Allen Key Bolt
=
# 32103-6058
Allen Key
_
# 37003-6258
Ay 44. 5mm Screws
| ooo
#37003-60ES
8x 38mm Bolt
Ee
#32101-65ES
STEP #3,4and7
8 x 19mm Washer
©)
# 32101-6168
STEP #3,4,and7
“L" Bracket - Steel
(Pre-assembled on Part#1)
ra
STEP #5
Wrench
a
# 32101-6968
ee ge ele)
Nut - Hex - 8mm
«o)
# 32101-6668
Surface Leveler
(Pre-assembled on Part#68)
# 32103-69ES
4x18mm Screws
7
# 32103-70ES
6.5x 50mm Allen Key Bolt
=
# 32103-6765

Accessories
Chalk Triangle Brush
# 32103-31ES # 32103-32ES # 37003-27ES
Billiard Balls Cues
OOOC ee
3558 Ss
# 37003-26ES # 32101-32ES

BILLIARD TABLE.- instructions
(BEFORE) NOTE:
BEFORE BUILDING -
Please inspect your playfield
and layout all your parts
Your Cabinet (Billiard Table playfield)
is NOT replaceable. Any damage that
exists to your playfield is not reparable under
warranty. If your playfield is damaged, the entire
game must be returned to the original place of
purchase for an exchange.
Bee) a) lag ous
@)
Leg
Panel
-
Groove
Repeat
for
all
4
legs.
Pas eae
6.5x35mm Allen Key Bolt x32
Allen Key
( STEP2 )
COMPONENTS ee
NOTE:
T
os
(62)
G)
Leg
Top
NOTE:
Top
:Top
e
>
<a
attachment
attachment
Sera
LeaB
a
blocks
and
@
eg
base
piocks
and
te
9
Panel
-
Step
1
Assembly
should
face
roove
should
face
forward
forward
Step
1
Assembly
ees
(e104
va
leos.
NOTES

COMPONENTS
Ps
8x38mm Bolt (use 16 of 32)
8x19mm_ Washer (use 16 of 56)
Wrench
(eae
x4
Ea
(ola:
x16
x16
—
NOTE:
Repeat for all
four corners.
Do not
overtighten.
( STEP4 }
NOTE: Area cut away in
image to show screw holes
Step 3 Assembly
COMPONENTS
Step 2 Assembly
Step 3 Assembly
elas
8x38mm Bolt
8x 19mm Washer
Wrench
ola
x4
xX
|
[s
ae
x16
(2)
x16
—
Oy a
NOTE: Area
cut away in
image to show
screw holes
Repeat for all
four corners.
Do not
overtighten.

( STEP5 }
STEP 5A
Assembly for support bar Ss
STEP 5B
Attaching surface
levelers to backside
of playfield .
COMPONENTS
aes
Allen Key
6.5x 50mm Allen Key Bolt
COMPONENTS
Assembly 5A
elas
“L” Bracket - Steel
(Pre-assembled on Part#1)
(69) Surface Leveler
(Pre-assembled on Part#68)
Cine
xt |
x]
One
One
NOTES
Repeat for
both sides of
support bar.
Repeat for
both surface
levelers .
NOTE: Using two
adults pick up and
flip step 4/5 assemblies.
NOTE: Avoid sideways
pressure to legs when
flipping over
4x18mm Screw s
COMPONENTS eloe NOTES
Step 4 Assembly NOTE: Using
two adults pick
Step 5 Assembly up and flip step 4/5
assemblies.
Then carefully
position the main
cabinet into
position.
NOTE: Avoid
sideways pressure
to legs.

Bi
Step 6 Assembly x
8x38mm Bolt
8x19mm Washer (use 16 0f56) [x24
Wrench 1
Nut- Hex -8mm
x
Ix
s
No
No
Step 4 Assembly Main Cabinet
(_ sTePs_) means ary.
(9)
Imm
Shim
Use
The
Shims
as
needed
2mm
Shim
under
legs
to
level
the
table.
()
3mm
Shim
Step
7
Assembly
You
will
need
a
level to do this.
COMPONENTS (pe NOTE:
if your playfield
is not perfectly
level after using
your shims ,
ea
OTY.
adjust
your
Wrench
surface
levelers
using the wrench
supplied to move
the playfield up
and down.

Limited Warranty
As described in and as limited by this Limited Warranty, EastPoint Sports, Ltd. (the “Company”) warrants this Billiard Table, Dartboard and Cue Rack (the “Product”) to be free
from defects in workmanship and materials for a period of 90 days from the date of original purchase. The term defects shall mean any imperfections that impair the use of
the product. The Company reserves the right to request confirmation of Proof of Purchase when requesting parts or service in order to confirm that the game is within its
warranty period.
What is Covered: Except as provided herein, this Limited Warranty covers all defects in materials and workmanship. This Limited Warranty is void if the Product is:
Damaged through improper usage or storage, negligence, misuse, abuse, transportation damage, acts of nature, or accident (including failure to follow the
instructions supplied with the product)
Used in commercial applications, rentals or a commercial environment
Modified or repaired by anyone not authorized by the Company
What is Not Covered:
The Limited Warranty does not cover:
Expendable items such as cosmetic parts, game playing accessories, and any other items that may show signs of wear due to normal usage
Any transportation/delivery/installation costs incurred by the Consumer (either home from the original place of purchase or back to the original place of purchase)
What the Company Will Pay For:
If any part or component of the Product which is covered by this Limited Warranty is found by the Company to be defective, the Company will provide replacement
parts without charge. The Company's obligation to repair or replace the Product or any portion thereof, shall be limited to the original purchase price of the product.
If during the Limited Warranty period, the product is found to be defective, the Company will, at the Company's option, send parts, or make remuneration for the
Product (either the same or equivalent value) without charge.
How to Obtain Warranty Service: In order to enforce your rights under this Limited Warranty, you must follow these procedures:
You must return the ORIGINAL COPY OF YOUR SALES RECEIPT to the Company.
You must call the Company's Consumer Service Department at 1-877-279-7071 on Monday through Friday between the hours of 9:00 A.M. and 5:00 PM. (EST) to notify
the Company of the nature of the problem. At the Company's option, replacement parts or a new Product (either the same or equivalent value) will be sent to you
at no charge.
If you are instructed to return the Product to the Company for servicing, you are responsible for shipping the Product, at your expense, to the address designated
by the Company in packaging that will protect against further damage.
You must also include your name, address, daytime telephone number, Product model number, and a description of the problem.
The Company will pay for any shipping charges to return the repaired of replaced Product to you.
THIS LIMITED WARRANTY IS AVAILABLE ONLY TO THE ORIGINAL PURCHASER OF THE PRODUCT AND IS VALID ONLY IN THE UNITED STATES. THE COMPANY'S
LIABILITY IS LIMITED TO THE REPAIR, REPLACEMENT, OR REMUNERATION, AT ITS OPTION, OF ANY DEFECTIVE PRODUCT AND SHALL NOT INCLUDE ANY LIABILITY
FOR INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY KIND. THIS WARRANTY IS EXPRESSLY MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY AND THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR
PURPOSE. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR DO NOT ALLOW FOR EXCLUSION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES. TO THAT EXTENT, THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
This Limited Warranty gives you specific legal rights, but you may also have other rights that vary from state to state.
If you have any questions regarding this Limited Warranty or the operation of the Product, you may call or write us.
ALL WARRANTY CLAIMS MUST BE ACCOMPANIED BY A COPY OF THE SALES RECEIPT/PROOF OF PURCHASE. REPORT ANY DEFECTS TO:
4 ==
EASTPOINT
628 ROUTE 10, SUITE #5 WHIPPANY, NEW JERSEY 07981 + 1-973-585-4747

TABLE MAINTENANCE AND CARE
Table Top -
It is OK to gently vacuum the felt side of the billiard table with any standard handheld vacuum brush
attachment.
ayy
ee
My
EASTPOINT
S P O R T S
628 ROUTE 10, SUITE #5 WHIPPANY, NEW JERSEY 07981 - 1-973-585-4747