Cortex FT10 User manual

FT10 FREE WEIGHT
FUNCTIONAL TRAINER
Product may vary slightly from the item pictured due to model upgrades
Read all instructions carefully before using this product. Retain this owner’s manual
for future reference.
NOTE: This manual may be subject to updates or changes. Up to date manuals are available through our website at www.lifespanfitness.com.au

FT10 Free Weight Function Trainer
2
TABLE OF CONTENTS
1. IMPORTANT SAFETY INSTRUCTIONS_____________________________________ 3
2. PARTS LIST_____________________________________________________________ 4
3. ASSEMBLY INSTRUCTION________________________________________________ 6
4. WARRANTY____________________________________________________________ 12

FT10 Free Weight Function Trainer
3
WARNING - Read all instructions before using this machine.
1. IMPORTANT SAFETY INSTRUCTIONS
Install the product on a flat level surface
Place your unit on a solid, level surface when in use
Never allow children on or near the machine.
Keep hands away from all moving parts.
Never drop or insert any object into any openings.
Care must be taken when lifting or moving the equipment so as not to injure your back. Always use
proper lifting techniques and/or seek assistance if necessary.
Keep children and pets away from the machine at all times. DO NOT leave children unattended in the
same room with the machine.
Only 1 person at a time should use the machine.
If the user experiences dizziness, nausea, chest pain, or any other abnormal symptoms, STOP the
workout at once. CONSULT A PHYSICIAN IMMEDIATELY
Do not use the machine near water or outdoors.
Keep hands away from all moving parts.
Always wear appropriate workout clothing when exercising. DO NOT wear robes or other clothing that
could become caught in the machine. Running or aerobic shoes are also required when using the
machine.
Use the machine only for its intended use as described in this manual. DO NOT use attachments not
recommended by the manufacturer.
Do not place any sharp objects around the machine.
Disabled person should not use the machine without a qualified person or physician in attendance.
Never operate the machine if the machine is not functioning properly.
A spotter is recommended during exercise.

FT10 Free Weight Function Trainer
4
2. PARTS LIST

FT10 Free Weight Function Trainer
5

FT10 Free Weight Function Trainer
6
3. ASSEMBLY INSTRUCTION
STEP 1
a. Attach The connection frame (2) to Right bottom framework and Right bottom connection
frame (4) and Left bottom connection frame (5), using Screw rod (28), Screw M10X85 (37),
Flat washer Ф10 (35) and Lock nut M10 (36).
b. Attach The connection frame (2) to The foot rack (3), using Screw M10X75 (48), Flat
washer Ф10 (35) and Lock nut M10 (36).

FT10 Free Weight Function Trainer
7
STEP 2
a. Attach Rear bottom frame (1) to The pipe run (27) and The connection frame (2), using
The reinforcing plate (32), Screw M10X85 (37), Flat washer Ф10 (35) and Lock nut M10 (36).
b. Attach The pipe run (27) to Top connection frame (6), Support frame (9) and The sliding
plane (16), using Rubber (33), Screw M10X75 (48), Flat washer Ф10 (35) and Lock nut M10
(36).
c. Attach Long connection frame (13) to Top connection frame (6) and The connection frame
(2), using Screw M10X85 (37), Flat washer Ф10 (35) and Lock nut M10 (36). The same as
Long connection frame (19).

FT10 Free Weight Function Trainer
8
STEP 3
a. Attach Top connection frame (6) to The right beam frame (7) and The Left beam frame (8),
using Screw rod (28), Screw M10X85 (37), Flat washer Ф10 (35) and Lock nut M10 (36).
b. Attach Adjust the tube (29) to The right beam frame (7) and Right bottom connection
frame (4), using The right to sdjust (11), The pulley Ф89 (34), Screw M10X65 (39), Flat
washer Ф10 (35), Lock nut M10 (36). The same as The left beam frame (8) and Left bottom
connection frame (5).

FT10 Free Weight Function Trainer
9
STEP 4
a. Attach Cross connection frame (10) to The right beam frame (7) and Top connection
frame (6), using The reinforcing plate (31), Screw M10X85 (37), Screw M10X80 (38), Flat
washer Ф10 (35) and Lock nut M10 (36).
b. Attach The right hand (15) to Cross connection frame (10), using Screw M10X85 (37), Flat
washer Ф10 (35) and Lock nut M10 (36). The same as The left hand (14) and Cross
connection frame (10).
c. Attach The cover plate (30) to Long connection frame (13) and Long connection frame
(19), using Screw M6X10 (45), Flat washer Ф6 (43) and Spring washer Ф6 (44).
d. Attach Double pulley bracket (21) to The right to adjust (11), using Screw M12X100 (42),
Flat washer Ф12 (40) and Lock nut M12 (41). The same as The left to adjust (12) and Double
pulley bracket (21).

FT10 Free Weight Function Trainer
10
STEP 5
a. Follow below drawing to assembly cable.

FT10 Free Weight Function Trainer
11
STEP 6
a. Attach Spring wings Ф50 (47) to barbell frame (17).
b. Adjust the cable according to the structure shown below.

FT10 Free Weight Function Trainer
12
4. WARRANTY
AUSTRALIAN CONSUMER LAW
Many of our products come with a guarantee or warranty from the manufacturer. In addition, they
come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled
to a replacement or refund for a major failure and compensation for any other reasonably
foreseeable loss or damage.
You are entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure. Full details of your consumer rights may be found at
www.consumerlaw.gov.au
Please visit our website to view our full warranty terms and conditions:
http://www.lifespanfitness.com.au/warranty-repairs
Warranty and Support:
Please email us at [email protected]om.au for all warranty or support issues.
For all warranty or support related enquiries an email must be sent to lodge a support case in our system.