Easy EASYultra User manual

EASYultra
Installation manual

EASYultra wall panels consist of an aluminium frame, containing glass wool and the
visible side is nished with a soft impact-resistant breglass top foil.
The application of the wall panels is to absorb sound reections to reduce reverberation
in interior spaces and thus improve the acoustics. You hang the wall panels on a supplied
french cleat.
For more information about this product, please visit our website or contact us by phone.
Points of attention
• Watch out for sharp objects when unpacking and assembling ;
• Provide a clean work area to avoid stains on the wall panel during installation.
General
Need help?
Contact us!
[phone]
[e-mail]

Drill
Pen/pencil
Optional
Cross line laser
Level
Necessities
Components
French cleat
Wall panel
1x
1x
Optional

Place the french cleat against the wall and
mark it. Drill holes in the wall and place the
plugs in them. Then screw the french cleat
onto the wall.
01
Tip: Use a cross-line laser or level to align the wall
panel. Fix the french cleat to the wall.
Fix the french cleat to
the wall

02
Hang the wall panel on the french cleat. The
panel will hang directly against the wall.
Place the wall panel

EN22.1
#weareacoustics
This text has been compiled with the utmost care. The same applies to the test results and further certicates.
However, no rights may be derived from this text and modications are subject to change. It is not possible to
guarantee certain properties or the suitability of our products for a specic application. Please refer to our additional
conditions or contact us.