EASYBED Easybed Sofa User manual

1220 mm
1420 mm
1620 mm
1820 mm
EN
Mod.Easybed Sofa
Assembly instructions

Page 18
Use
Product descripon
-
-
Before using the hideaway bed, the user must make sure that on the sleeping surface
The bed system in composed by following items:
•
•
•
•
•
Guarantee
1. General descripon
EASYBED warrants its products for a period of 2 years from the date of purchase.
This warranty excludes commercial components. These parts are guaranteed by their
original manufacturer.
The guarantee is valid only for appliances that have been installed and used
Responsibility for any misuse is disclaimed.
This product’s use is very simple: before installing and using it, it’s mandatory to care-
fully read the booklet.
use and maintenance of the product.
It’s important that the booklet is kept together with the product.
This product has been developed for a non-professional use by private persons in
households. Its use is not intended to be used by people (children included) who’s
knowledge, unless they have been taught by a person that’s responsible for their sa-
fety. Children shall be surveyed and are not allowed to play with the device.
rules of this brief.
ALL INSTRUCTIONS OF THIS BOOKLET
SHALL BE CAREFULLY READ!!!

Page 19
Remarks: No liability is assumed by EASYBED in failure to comply with the
given advices.
2 . Safety
Safety standard
without danger of harm to himself and to others.
surface.
things or animals.
technical features, learnt through an accurate and complete reading of the present
user’s guide.
not allowed.
The use of accessories or spare parts other than those recommended by the supplier,
present a non proper and hazardous use of the product.
blankets or else.
WARNING !!!
Never place the product near any heat sources.
hinder its movement.
EASYBED releases the company from any civil or penal liability.
Tampering or replacement of bed parts are not autorized by EASYBED, are

Page 20
In some areas of the product there are some residual risks that couldn’t be avoided in
designing.
Each user has to be aware of the residual risks of this product in order to avoid
possible accidents.
These dangers are listed below:
1) HAZARDS OF CRUSHING
While moving the bedspring there are residual risks of crushing
hands between the moving parts of the mechanism and the
2) MAKE SURE that the area of the bedspring or on the bedspring
itself there are no people, animals or things that could collide
with its movement.
Residual risk areas
Placing of labels
The labels are to infor the users of possible risks during the mechanism’s
POSITION LABEL DESCRIPTION
On bedspring
Hand crushing

Page 21
have an extra bed, according to the needs, in a absolutely quick way, avoiding all unju-
MANUAL MECHNANISM
The manual hideaway bed’s movement happens by means of two gas springs put on
the sides of the structure, and recline the bedspring and by other two gas springs whi-
ch recline the upper panel, that becomes the bed’s footboard. (pag.42)
General
3. Use of the vercal hideaway bed and
its funcon
Make periodical check of all screwed on parts, including also the steadiness of the wall
Maintenance
4. Maintenance - cleaning - lubrificaon - disposal
The cleaning of all metal parts shall be made with a humid sponge or cloth.
Don’t use nay solvents or abrasive materials.
60 cycles with a lubricant.
Cleaning and lubrificaon
containers in accordance with the ruling standards.
DO NOT DUMP.
Disposal