PANTONE 072 C
PANTONE 123 C
Customer service: 0871 855 6100
For more innovative products from Easylife please visit:
www.easylifegroup.com
Dear Customer
Thank you for purchasing the Portable Car Bubble Washer.
Washing the car has just got simpler, quicker and more economical. And it’s all down to
this super Portable Car Bubble Washer. No outside tap, no mains electricity outlet? No
problem. Just ll the 8 litre water tank, pump the handle to create pressure and you’re in
business. Ideal for cars, motor cycles and caravans and boats too, it’s supplied with two
cleaning attachments. Use the trigger-operated spray nozzle attachment for an initial power
hose-down, then the specially designed cleaning brush attachment that seeks out dirt like
a magnet. Finally, spray again for rinsing. Featuring an integral liquid cleaner reservoir that
feeds car shampoo straight into the brush, our wash and rinse Car Bubble Washer will give
you a showroom nish in no time. Measures H55xD18cm with a 3m hose.
BEFORE USE
Check for any visible damage to the tank and all components before using.
INSTRUCTIONS FOR USE
FILLING THE TANK
1. Press down and turn the pump handle to lock it in place.
2. Unscrew the pump assembly by turning the locked pump handle to the right.
3. Fill the tank with the required amount of water.
4. Replace the pump and tighten.
USING TO WASH/CLEAN
1. Release the pump handle locking mechanism by pressing down and turning the pump handle.
2. Pump the handle around 25 times to obtain working pressure.
3. The pump is equipped with a safety valve which releases excess pressure.
4. The Portable Car Bubble Washer is ready for use.
5. Screwhandlermlyontothehose.
6. Decidewhichattachmentisrequiredandscrewrmlyontothehandle.
7. Press the trigger to wash, release it to stop.
8. Foracontinuousowofwaterpushthetriggerlockuntilitclicksintoplace.Pushthetrigger
lockbacktoit’soriginalpositiontostoptheowofwater.
9. Change attachments as required.
STRUCTURE/COMPONENTS
No need
for an
outside tap,
electricity or
batteries
Paper weight 60gsm
Use the cleaning brush
together with the soap
dispenser to shampoo
wash & shine
Simply screw to attach or remove
the soap dispenser or brush
Use the spray nozzle
to power rinse (remove
the soap dispenser,
attaching at point A)
Handle
Handle
1. Pump Handle
2. Funnel
3. Pump Assembly
4. Safety Valve
5. Pump O-Ring
6. Nozzle
7. Brush
8.Hose
9. Pump
10. Trigger Lock
11. Trigger
12. Piston Seal
13. Pump Seal
14. Suction Pipe
15. Bottle
16. Filter
17. Base
Screw to attach or
remove nozzle
A
