Easypix Panox MX200 User manual

panox®
mX200
ACTION CAM
NOTE
After reaching a max. video recording time of
29 minutes the camera will automatically stop.
It can only be restarted manually.
Before using your camera in the water please verify
that all lids and locks are tightly closed and sealed
on the camera and the underwater case.
After use, clean the housing of salt and chlorine
water and then let it dry.
The camera should not be exposed to large
temperature and humidity differences to avoid
condensation inside the housing or behind the lens.
After underwater use, the case must be kept open
to avoid condensation or rust.
DECLARATION OF CONFORMITY
easypix herebly declares that the product GoXtreme Rallye is in conformity
to all the essential requirements of Directive 1999/5/EC.
The declaration of conformity can be downloaded here:
http://www.easypix.info/download/pdf/doc_panox_mx200.pdf
For technical help please visit our support area on www.easypix.eu.

Operation
indicator
Charging
indicator
Shutter/Select Button
Down/Setting Button

Down/Setting Button
Shutter/Select Button

720p 30fps (by interpolation)
VGA 30fps
Press the “down” button
to go into setting menu:

5M*/3M*/2M*/1M*/VGA (*by interpolation)
1) HD 720p* 30fps (*by interpolation)
480p (640x480) 30fps