Eaton NFX9000 User manual

Program Instructions
Press “ENTER” to access the 10 Groups, Group 0-9: Display will show “0” = Group 0
Press “+” or “–” to select Group 1 - 9
When the required Group is displayed, press “ENTER” to go into that Group
Display will show the Group Parameter Code number:
Example: 1 - 00 = Group 1, Parameter 00
Press “+” or “–” to go to the required parameter number:
Example: 1 - 09 = Group 1 Par 09 = Acceleration
Press “ENTER” to view the parmeter set value
Example “d 10.0” = 10 seconds
Press the “+” or “–” to change the value
Press “ENTER” to stor the new value
Once the required Parameters are set, press “MODE” to go back to the previous level
Continue to press “MODE” until you return to the RUN screen...LED position = FWD or REV and STOP
Effective October 2011
NFX9000 Adjustable
Frequency Drives
Quick Reference Guide
IL04002001E
Quick Reference for NFX9000 Adjustable Frequency Drives

2
Quick Reference for NFX9000 Adjustable Frequency Drives
eaton corporation www.eaton.com
Quick Reference Guide IL04002001E
Run Display
Monitor Displays
Program Instructions
At any time, pressing the “MODE” button will toggle between five “read only” screens
F Set Reference Frequency
H Running Output Frequency
A Output Current
U Output Voltage
Frd Set Direction
Eaton Corporation
Electrical Sector
1111 Superior Ave.
Cleveland, OH 44114
United States
877-ETN-CARE (877-386-2273)
Eaton.com
© 2011 Eaton Corporation
All Rights Reserved
Printed in USA
Publication No. IL04002001 / BFO
November 2011
Eaton is a registered trademark of Eaton
Corporation.
All other trademarks are property of their
respective owners.