Eaton TRIPP LITE Series User manual

1
PRODUCT
REGISTRATION
Register your product
today for a chance to
win an ISOBAR®surge
protector in our monthly
drawing!
Tripplite.Eaton.com/
warranty
Owner’s Manual
Español 13
Français 23
Deutsch 33
Italiano 43
Model:
AWC-001
USB 2.0 Desktop/Laptop
1080p Webcam with
Internal Microphone
Purchased
product may
differ from
image.

2
Package Contents
• AWC-001 USB 2.0 Webcam
• User Documentation
• Captures High-Definition (HD) 1080p video at 30
frames per second and 2 megapixel images for
livestreaming or conference calls.
• 70° wide-angle lens reduces dead angles and
advanced H.264 video compression ensures
high-quality transmission.
• Rotatable clip makes it easy to mount onto
laptops or monitor screens and tripod threads
allow the webcam to mount onto a tripod for
extra stability.
• Built-in noise reduction microphone captures
audio within 20 ft. to ensure clear
communication and sound quality.
• Compatible with Windows®and Mac®operating
systems and Skype, Zoom and YouTube
software.
• Plug-and-play—no software or drivers to install.
Product Features

3
• USB 2.0 port or later
• Windows 7, 8, 10 or later
• Mac 10.10 or later
• Android™ 5.0 or later
• Chrome OS
System Requirements

4
1Open the clip base.
2Mount the webcam to the monitor or laptop.
Note: Make sure the foot on the clip base is flush
with the back of your monitor.
3Rotate the webcam to the desired angle.
1 in.
(25.5 mm)
USB
2 in. (49 mm)
1.7 in. (41.7 mm)
1.2 in.
(31.0 mm)
3.7 in. (94.3 mm)
1.9 in.
(48 mm)
1 in.
(25.5 mm)
USB
2 in. (49 mm)
1.7 in. (41.7 mm)
1.2 in.
(31.0 mm)
3.7 in. (94.3 mm)
1.9 in.
(48 mm)
Note: Tripod threads on the bottom of the clip base allow the
webcam to be mounted onto a tripod.
Mounting Instructions
1
1
2
2
3
3

5
Plug the webcam into a USB-A interface on your
PC, laptop or TV STB. The webcam will install
automatically in about 60 seconds.
To take advantage of livestreaming or video calls,
both you and the recipient must install video-
calling applications (such as Skype or Zoom) and
webcam hardware.
1 in.
(25.5 mm)
USB
2 in. (49 mm)
1.7 in. (41.7 mm)
1.2 in.
(31.0 mm)
3.7 in. (94.3 mm)
1.9 in.
(48 mm)
Connection/Installation
Video Calling

6
Q: How do I know if my camera is recognized by
the operating system?
A: Connect the webcam to any USB 2.0/3.0 port.
Once the webcam is connected, it may take a
moment before it is recognized by the
computer. To check if the webcam is
recognized by your computer’s operating
system, check the following:
Control Panel>System and Security>System>
Device Manager
Q: How do I know if my video calling application is
using my webcam?
A: All video applications include an option setting
to review the audio and video device. When
using the video application, review the
following:
The audio selection to ensure the webcam
microphone is selected.
• If not, change the selection to the AWC-001
webcam.
The video selection to ensure the webcam is
selected.
• If not, change the selection to the AWC-001
webcam.
Frequently Asked Questions

7
Q: How do I determine if the webcam is properly
installed on my computer?
A: For Windows operating systems: Go to:
Computer Management>Device
Manager>Cameras.
A: For Mac operating systems: Click on the
Finder icon in the Dock. From the Finder
window sidebar, click on Applications and
open the Photo Booth app. Click on the
Camera dropdown from the Photo Booth
toolbar. “USB 2.0 Camera” should be listed as
the default webcam.
Q: Why is my webcam not working with Skype or
Facebook?
A: Software like Skype and Facebook often use
the integrated webcam by default. To use the
AWC-001 webcam, go to the software’s video
settings and select the AWC-001 webcam as
the video source. For example, with Skype, go
to: Settings>Audio & Video to select the video
source.
Frequently Asked Questions

8
Pixel Size 2.8 μm x 2.8 μm
Operating & Storage
Temperature
14°F to 140°F
(-10°C to 60°C)
Image Resolution
2 megapixels
Pixel Range
320 x 240, 640 x 480,
1280 x 720, x 1920 x 1080
Frame Rate
30 fps
Lens Size 0.3 in. (7.6 mm)
Interface USB 2.0 (backwards
compatible with USB 1.1)
Data Format YUY2/MJPEG
Viewing Angle 70°
DC Voltage 5V
Current 200mA
Cable Length 4.9 ft. (1.5 m)
USB Specication USB 2.0 (backward
compatible with USB 1.1)
Specifications

9
1-Year Limited Warranty
We warrant our products to be free from defects in
materials and workmanship for a period of one (1) year
from the date of initial purchase. Our obligation under this
warranty is limited to repairing or replacing (at its sole
option) any such defective products. Visit Tripplite.Eaton.
com/support/product-returns before sending any
equipment back for repair. This warranty does not apply to
equipment which has been damaged by accident,
negligence or misapplication or has been altered or
modified in any way.
EXCEPT AS PROVIDED HEREIN, WE MAKE NO WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. Some states do not permit limitation or exclusion
of implied warranties; therefore, the aforesaid limitation(s)
or exclusion(s) may not apply to the purchaser.
EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL WE BE
LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF
THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE. Specifically, we are not liable for any costs,
such as lost profits or revenue, loss of equipment, loss of
use of equipment, loss of software, loss of data, costs of
substitutes, claims by third parties, or otherwise.
Warranty and Product Registration

10
Product Registration
Visit Tripplite.Eaton.com/warranty today to register your
new product. You'll be automatically entered into a drawing
for a chance to win a FREE Eaton Tripp Lite series product!*
* No purchase necessary. Void where prohibited. Some
restrictions apply. See website for details.
Warranty and Product Registration

11
FCC Notice, Class B
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help. Any changes or modifications to this
equipment not expressly approved by Eaton could void
the user's authority to operate this equipment.
Compliance

12
WEEE Compliance Information for Customers and
Recyclers (European Union)
Under the Waste Electrical and Electronic
Equipment (WEEE) Directive and implementing
regulations, when customers buy new electrical
and electronic equipment from Eaton, they are
entitled to:
• Send old equipment for recycling on a one-for-
one, like-for-like basis (this varies depending on
the country)
• Send the new equipment back for recycling
when this ultimately becomes waste
Use of this equipment in life support applications where
failure of this equipment can reasonably be expected to
cause the failure of the life support equipment or to
significantly affect its safety or effectiveness is not
recommended.
Eaton has a policy of continuous improvement.
Specifications are subject to change without notice. Photos
and illustrations may differ slightly from actual products.
Compliance
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
© 2023 Eaton
All Rights Reserved
Publication No.
23-08-262 /
93-3CF6_revB
December 2023
Eaton is a registered
trademark.
All trademarks are
property of their
respective owners.

13
Manual del Propietario
English 1
Français 23
Deutsch 33
Italiano 43
Modelo:
AWC-001
Cámara Web USB 2.0 para
Computadora de Escritorio
o Laptop 1080p con
Micrófono Interno
El producto
comprado puede
diferir de la
imagen.

14
Contenido del Empaque
Características del Producto
• Cámara Web USB 2.0 AWC-001
• Documentación del usuario
• Capturavideodealtadenición(HD)1080pa30
fotogramas por segundo y 2 megapíxeles para
sonido en vivo o llamadas en conferencia.
• El lente gran angular de 70° reduce los ángulos
muertosylacompresióndevideoH.264
avanzada garantiza una transmisión de alta
calidad.
• El clip giratorio facilita la instalación en laptops
o pantallas de monitor y las roscas de trípode
permiten que la cámara web se instale en un
trípode para estabilidad adicional.
• El micrófono incorporado para reducción de
ruidocapturaaudiodentrode6.1m[20pies]
para asegurar una comunicación y calidad de
sonido claras.
• Compatible con sistemas operativos Windows®y
Mac®y software Skype, Zoom y YouTube.
• Conectar y Usar—No requiere instalar
programas ni controladores.

15
Requisitos del Sistema
• Puerto USB 2.0 o posterior
• Windows7,8,10oposterior
• Mac 10.10 o posterior
• Android™ 5.0 o posterior
• OS Chrome

16
1Abra la base del clip.
2Instale la cámara web sobre el monitor o la
laptop.
Nota: Asegúrese de que el pie en la base del clip esté al
ras con la parte posterior de su monitor.
3Gire la cámara web al ángulo deseado.
1 in.
(25.5 mm)
USB
2 in. (49 mm)
1.7 in. (41.7 mm)
1.2 in.
(31.0 mm)
3.7 in. (94.3 mm)
1.9 in.
(48 mm)
1 in.
(25.5 mm)
USB
2 in. (49 mm)
1.7 in. (41.7 mm)
1.2 in.
(31.0 mm)
3.7 in. (94.3 mm)
1.9 in.
(48 mm)
Nota: las roscas para trípode en la parte inferior de la base del
clip permiten instalar la cámara web en un trípode.
Instrucciones de Instalación
1
1
2
2
3
3

17
Enchufe la cámara web en una interfaz USB A en su
PC,laptopodecodicadordeTV.Lacámaraweb
seinstalaráautomáticamenteenunos60segundos.
Para aprovechar las llamadas en vivo o en video,
tanto usted como el destinatario deben instalar
aplicacionesdellamadasdevideo(comoSkypeo
Zoom)yhardwaredecámaraweb.
1 in.
(25.5 mm)
USB
2 in. (49 mm)
1.7 in. (41.7 mm)
1.2 in.
(31.0 mm)
3.7 in. (94.3 mm)
1.9 in.
(48 mm)
Conexión e Instalación
Videollamada

18
Preguntas Frecuentes
P: ¿Cómo sé si mi cámara es reconocida por el
sistema operativo?
R: Conecte la cámara web a cualquier puerto USB
2.0 o USB 3.0. Una vez que la cámara web esté
conectada, puede tomar un momento antes
de que la computadora la reconozca. Para
comprobar si la Cámara Web es reconocida
por el sistema operativo de su computadora,
compruebe lo siguiente:
Panel de Control>Sistema y
Seguridad>Sistema> Administrador de
Dispositivos
P: ¿Cómo sé si mi aplicación de llamadas de video
está usando mi cámara web?
R: Todas las aplicaciones de video incluyen
unaconguraciónopcionalpararevisar
el dispositivo de audio y video. Al usar la
aplicación de video, revise lo siguiente:
Laseleccióndeaudioparaasegurarqueel
micrófono de cámara web esté seleccionado.
• Si no es así, cambie la selección a la cámara
web AWC-001.
Laseleccióndevideoparagarantizarquela
cámara web esté seleccionada.
• Si no es así, cambie la selección a la cámara
web AWC-001.

19
Preguntas Frecuentes
P: ¿Cómo determino si la cámara web está
correctamente instalada en mi computadora?
R: Para sistemas operativos Windows: vaya a:
Administración de Computadora>Administrador
de Dispositivos>Cámaras.
R: ParasistemasoperativosMac:Hagaclick
en el icono de buscador en la estación
de conexión. Desde la ventana lateral del
buscador, haga click en aplicaciones y abra
laaplicacióndelPhotoBooth.Hagaclicken
el menú desplegable de la cámara desde la
barra de herramientas del Photo Booth. Debe
listarse “Cámara USB 2.0” como la cámara web
predeterminada.
P: ¿Por qué mi cámara web no está trabajando
con Skype o Facebook?
R: Software como Skype y Facebook a menudo
usan la cámara web integrada de forma
predeterminada. Para usar la cámara web
AWC-001,vayaalaconguracióndevideodel
software y seleccione la cámara web AWC-001
como la fuente de video. Por ejemplo, con
Skype,vayaa:Conguraciones>AudioyVideo
para seleccionar la fuente de video.

20
Especificaciones
Tamaño de Píxeles 2.8μmx2.8μm
Temperatura
de Operación y
Almacenamiento
-10°Ca60°C
[14°Fa140°F]
Resolución de Imagen 2 megapíxeles
Rango de Píxeles 320x240,640x480,
1280x720,x1920x1080
Cuadros por Segundo 30 cuadros por segundo
TamañodelaLente 7.6mm[0.3"]
Interfaz USB2.0(compatiblecon
versiones anteriores de
USB1.1)
Formato de Datos YUY2 / MJPEG
Ángulo de
Visualización
70°
VoltajeCD 5V
Corriente 200mA
LongituddelCable 1.5m[4.9pies]
EspecicaciónUSB USB2.0(compatiblecon
versiones anteriores de
USB1.1)
Other manuals for TRIPP LITE Series
23
This manual suits for next models
1
Table of contents
Languages: