Ecler essentials eIC5154 User manual

v.20220323
eIC5154
IN-CEILING LOUDSPEAKERS
EN 54-24 Certified In-ceiling / In-wall Loudspeaker
USER MANUAL

2
INDEX
IMPORTANT REMARK ..........................................................................................................3
IMPORTANT SAFETY INSTRUCTIONS .............................................................................3
IMPORTANT NOTE................................................................................................................5
INTRODUCTION .....................................................................................................................5
Applications ......................................................................................................................................... 5
MAIN CHARACTERISTICS: ..................................................................................................5
CONNECTION..........................................................................................................................6
INSTALLATION.......................................................................................................................7
TECHNICAL DATA.................................................................................................................8
Circuit diagram .................................................................................................................................... 8
Mechanical diagrams......................................................................................................................... 9
Exploded view..................................................................................................................................... 9
Rear label............................................................................................................................................10
Certification plate.............................................................................................................................10

3
IMPORTANT REMARK
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
WARNING (If applicable): The terminals marked with symbol of “ ” may be of
sufficient magnitude to constitute a risk of electric shock. The external wiring connected
to the terminals requires installation by an instructed person or the use of ready-made
leads or cords.
WARNING:To prevent fire or shock hazard, do not expose this equipment to rain or
moisture.
WARNING:An apparatus with Class I construction shall be connected to a mains
socket-outlet with a protective earthing connection.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.

4
9. Do not defeat the safety purpose of the polarized or grounding type plug. A
polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade or the third
prong are provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at the plugs,
convenience receptacles, and at the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Unplug the apparatus during lightening sorts or when unused for long periods of
time.
13. Refer all servicing to qualified personnel. Servicing is required when the
apparatus has been damaged in any way, such as power supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.
14. Disconnecting from mains: When switching off the POWER switch, all the
functions and light indicators of the unit will be stopped, but fully disconnecting
the device from mains is done by unplugging the power cable from the mains
input socket. For this reason, it always shall remain easily accessible.
15. Equipment is connected to a socket-outlet with earthing connection by means of
a power cord.
16. The marking information is located at the bottom of the unit.
17. The apparatus shall not be exposed to dripping or splashing and that no objects
filled with liquids, such as vases, shall be placed on apparatus.
NOTE: This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
WARNING:This product must not be discarded, under any circumstance, as
unsorted urban waste. Take to the nearest electrical and electronic waste
treatment centre.
NEEC AUDIO BARCELONA, S.L. accepts no liability for any damage that may be caused
to people, animal or objects due to failure to comply with the warnings above.

5
IMPORTANT NOTE
Thank you for choosing our Ecler eIC5154 EN 54-24 certified in-ceiling/in-wall
loudspeaker!
It is VERY IMPORTANT to carefully read this manual and to fully understand its
contents before any connection in order to maximize your use and get the best
performance from this equipment.
To ensure optimal operation of this device, we strongly recommend that its maintenance
be carried out by our authorised Technical Services.
Ecler eIC5154 comes with a 3-year warranty.
INTRODUCTION
ECLER eIC5154 is a cost-effective in-ceiling loudspeaker that features a design which
conforms to EN54-24 standard (Fire detection and fire alarm systems, Voice alarms -
Loudspeakers). It performs a 5”woofer.
Applications
•Corporate and residential buildings
•Commercial premises
•Leisure centres
•Health and sports centres
•Meeting and conference rooms
•Auditoriums, museums
MAIN CHARACTERISTICS:
•One-way ABS speaker
•Power selector @ 100V 6/3/1,5/0,75/0,38 W
•5” woofer
•Available in traffic white (RAL 9016)
•EN 54-24:2008 certified

6
CONNECTION
Step A: open the loudspeaker from the clamp as shown in
the picture.
Step B: release the spring to open the fireproof dome.
Step C: pass the audio cable through the wire clamp.
Step D: connect the loudspeaker wire according to the
requirement in the label. Then install the loudspeaker.

7
INSTALLATION
Step 1: measure the mounting hole. It must be as the
cut-out size of the device. Pass the cable through the
cable gland. Follow steps A, B & C.
Step 2: loose the metal plates and rise them up to
the top. Insert the back can into the mounting hole.
Step 3: slide down the metal plates until they reach
the surface. Tight the fasteners inside the back can.
Step 4: follow step D. Then connect the audio cable to
the loudspeaker’s terminal block. Finally, insert the
mounting springs into the hooks and push the
loudspeaker into the back can.

8
TECHNICAL DATA
eIC5154
System
Effective frequency range1
120 Hz-20 kHz
Coverage angle2
165°x165° (HxV)
Sensitivity3
92 (1W/1m)
Power options
100V: 6W / 3W/ 1,5W / 0,75W / 0,38W
70V: 3W/ 1,5W / 0,75W / 0,38W / 0,19W
Transducers
Ways
1
Driver
5" woofer
Physical
Installation options
Ceiling
Certifications
EN54-24
Enclosure material
ABS
Finished color
Traffic white (RAL 9016)
Recommended cut out diameter
158 mm / 6.22"
Ceiling thickness
No limit min
40mm / 1.57" max
Dimensions (ØxD)
180x157mm / 7.09"x6.18"
Weight
1.2 kg / 2.65 lb
110dB below the sound pressure level at specified sensitivity
26dB below the sound pressure level than that at the direction of maximum level, Average from 1 kHz to 4 kHz.
3Measured on-axis, far field and referenced to 1 meter by inverse square law. Average from 100 Hz to 10 kHz.
Circuit diagram

9
Mechanical diagrams
Exploded view

10
Rear label
Certification plate

11
All product characteristics are subject to variation due to production tolerances.
NEEC AUDIO BARCELONA S.L. reserves the right to make changes or improvements in the design or
manufacturing that may affect these product specifications.
For technical queries contact your supplier, distributor or complete the contact form on our website,
in
Support / Technical requests.
Motors, 166‐168 08038 Barcelona ‐ Spain ‐ ([phone] | informati[email protected] | www.ecler.com