ecLife THKFBV004 User manual

HARDWARE LIST
E12PCS
INSTALLATION INSTRUCTIONS
THKFBV004
FEEDBACK
NO.19070
Thank you very much for purchasing from us.
We have always been trying to provide the best service and
reliable products for every customer.
However, accident may happen sometimes, please contact
us to resolve any issue before leaving a negative feedback.
Many thanks and welcome to our shop again!
Contact number: 626-3625309
E-mail: [email protected]
www.ec-export.com
15
09
PARTS LIST HARDWARE LIST
Unit:inch
ASSEMBLY DIAGRAM
PARTS LIST INSTALLATIONS
STEP 2
STEP 3
STEP 1
Insert the Cam Screw into the shelves above.
Insert the wooden dowel pins into the shelves.
DIMENSIONS
YOU MAY NEED (NOT SUPPLIED)
B38PCS
HARDWARE LIST
D20PCS
HARDWARE LIST
A1PCS
NO.
1 1 A54
1
71 G
4
41D
10
21B54
1
1
1
1
1
2
81H
I
J
K
LK
G
2
2
4
2
2
2
2
2
4
51E
48
11
12
D11
DA1
DA2
DA3
DA4
13
14
15
31C54
91
61 F
2
2
20
NO.DESCRIPTION DESCRIPTION
CAM LOCK
CAM SCREW
CAM LOCK COVER
WOODEN DOWEL
SCREW
HINGE（mid)
HINGE（large)
HANDLE
HASCREW(φ4x20mm x2)
HASCREW(φ4x15mm x2)
QTY
QTY
CAUTION: Please confirm the parts list before installtion
STEP 5
C1PCS
Insert shelves #07 and
#08 downwards to their
corresponding positions.
Then tighten the cam lock with
the cover.
DA3
DA1
DA4 DA2
D11
X2
15
15
08
07
4PCS
M-1
STEP 4 HARDWARE LIST
A
C
8PCS
8PCS
32″
19.7″
31.5″
LR
X 2
M-1 M-2
02
03
01
04
05
06
07
08
09
10
11
12
13
14
15
06
06
HARDWARE LIST

HARDWARE LIST
HARDWARE LIST
A9PCS
HARDWARE LIST
A4PCS
STEP 6
STEP 7
C
C
9PCS
4PCS
STEP 8
STEP 9
A
A
C
C
8PCS
6PCS
8PCS
6PCS
2PCS
STEP 10
STEP 11
STEP 12 STEP 14
STEP 13
To ensure proper cabinet alignment, refer to the above
illustrations for instructions about adjusting the cabinet
height, depth and lateral movement.
A.height adjustment B.depth adjustment C.side to side adjustment
D.after adjustment A/B/C,tighten screws.
HARDWARE LIST
Use F SCREWS to connect the hinge bracket to the
cabinet.
Note: see step 11 to adjust the door's position.
I
H
F
E
G
G
2PCS
2PCS
16PCS
2PCS
16PCS
2PCS
HARDWARE LIST
DA4
DA4
DA1 DA3
D11
DA2
DA3
DA1
DA2
HARDWARE LIST
A16PCS
C16PCS
4PCS
M-2
HARDWARE LIST
E
12PCS
1. Many cleansers contain abrasive and chemical
substance which is not suitable for cleaning stainless
steel, enamel, plating or plastic products. You may use
mild cleansers or soaps to clean the surfaces. Wipe any
splashes of cleaner solutions from the surface with a
clean soft cloth.
2. Maintain ventilation in the bathroom and separate the
dry area from the damp one if conditions permit. Try to
open the door and windows of the bathroom to maintain
adequate ventilation.
3. This cabinet is built to withstand normal bathroom
humidity. For best results, keep this vanity dry and
take necessary steps to minimize bathrom humidity by
opening windows and doors and using the exhaust fan (if
available).
4. To maintain the cabinet door, clean and wipe the door
regularly with a soft cloth. Wipe condensation with a dry,
soft cloth. Keep away from res and high temperatures.
5. Please do not sit, lean or step on the basin cabinet.
CARE AND CLEANING
STEP 15
E F
F
E
G
J
H
HARDWARE LIST
L
2PCS
2PCS