Eclipse Popo User manual

Popo cams by Eclipse
360º Vehicle Surveillance System
4 channel VVR / all in one 4 channel vehicle video recorder
User Manual 2015 APR V1.0
Option
Mobile DVR
Camera

Popo cams by Eclipse 360º Surveillance Digital Recording System
i
Safety Precautions
Take and review some testing video initially to make sure the
images were recorded correctly. Please note that manufacturer,
its subsidiaries and affiliates, and its distributors are not liable for
consequential damages arising from any malfunction of main
device accessory, including memory device that results in the
failure of an image to be recorded or to be recorded in a way that
is machine readable.
Before using the product, please ensure that you read the safety precautions
described below. Always ensure that the product is used correctly.
• Please keep device away from children.
• Use only recommended power sources.
• Do not attempt to disassemble, alter or apply heat to the product.
• Avoid dropping or subjecting the product to severe impacts.
• To avoid the risk of injury, do not touch the interior of the product if it has
been dropped or otherwise damaged.
• Stop using the product immediately if it emits smoke, a strange smell, or
otherwise behaves abnormally.
• Do not use organic solvents such as alcohol, benzene, or thinner to clean
the product.
• Do not let the product come into contact with water (e.g. sea water) or
other liquids.
• Do not allow liquids or foreign objects to enter the VVR.
• Do not place the VVR near or in direct flame.
• Do not handle the power cord with wet hands.
• Do not use the equipment in a manner that exceeds the rated capacity of
the electrical outlet or wiring accessories. Do not use if the power cord or
plug are damaged, or not fully plugged into the outlet.
• Do not allow direct or metal objects (such as pins or keys) to contact the
terminals or plug.
• Avoid using, placing or storing the product in the humid or dusty areas.

Popo cams by Eclipse 360º Surveillance Digital Recording System
ii
Table of Contents
A. Features .................................................................................................. 1
B. Specification ......................................................................................... 2
C. Accessories ........................................................................................... 4
D. Product Dimension ............................................................................ 5
1. Mobile DVR Dimension ......................................................... 5
2. Appearance of Camera .......................................................... 7
E. Installation............................................................................................. 8
1. DVR Wiring Diagram .............................................................. 8
2. Camera Installation Diagram ............................................ 10
3. How to install Memory Card ............................................. 11
F. ON/OFF ............................................................................................... 12
G. Remote Controller Introduction ................................................ 14
H. Real Time Monitoring Mode ....................................................... 16
I. Playback Instruction ....................................................................... 17
1. To playback in main engine ............................................... 17
2. To Playback in PC ................................................................... 18
J. Menu Operation On The Mobile DVR ..................................... 21
1. Main Menu .............................................................................. 21
2. Menu OperatiOn And Parameter Setup ....................... 22
(1). Video recording setting ......................................... 22
(2). Parking setting .......................................................... 23
(3). Color adjustment ...................................................... 23
(4). Time setting ................................................................ 24
(5). Vehicle number setting .......................................... 24
(6). Format the disk ......................................................... 25
(7). Live screen mode setting ...................................... 25
(8). Power Management ................................................ 25
(9). Alarm setting .............................................................. 26
(10). Password setting ....................................................... 26

Popo cams by Eclipse 360º Surveillance Digital Recording System
iii
(11). G-Sensor setting ....................................................... 27
(12). Restore to Factory setting ..................................... 27
(13). Language setting ...................................................... 28
(14). Firmware upgrade .................................................... 28
(15). Firmware version ...................................................... 29
K. Player (On the personal computer) .......................................... 30
(1). Capture ......................................................................... 30
(2). Configuration ............................................................ 31
(3). Backup .......................................................................... 34
(4). Playback ....................................................................... 37
(5). Format .......................................................................... 37
(6). Footage playback speed ....................................... 38
(7). MAP ............................................................................... 38
(8). G-sensor ...................................................................... 39
(9). Footage playback speed ....................................... 39
(10). Volume ......................................................................... 40
(11). Control panel ............................................................. 40
(12). Direction and Latitude ............................................ 41
(13). Speed ............................................................................ 41
L. Format the SD card ......................................................................... 42
1. Format on the recorder ....................................................... 42
2. Format in your computer ................................................... 43
M. Restore the SD card ........................................................................ 46

Popo cams by Eclipse 360º Surveillance Digital Recording System
1
A. Features
All New Parking Surveillance Mode:
- Programmable recording time-reduce vehicle battery
exhausting.
- Programmable fps - prolong recording time.
Mobile DVR with 4CH 360° camera; Leaving no blind spots
of your surroundings.
H.264 Video compression technology with D1& CIF
resolution.
Quick search on event records-Easy and reliable.
Time & date are included in every footage.
Auto recording after power on.
SDHC card storage-free from shock and vibration.
Firmware updatable via USB.
Fully recording video, audio, G-sensor, and GPS inputs.

Popo cams by Eclipse 360º Surveillance Digital Recording System
2
B. Specification
Mobile DVR
Item Description
Signal type NTSC/PAL
OS Embedded Linux
Video input 1CH
Video output 1 CH AV
Audio input 1CH input
Audio output 1CH AV
Alarm-in 1 input
Interface Icon、Multi-language(English, Traditional Chinese, Simplified
Chinese)
Display FPS NTSC 120 fps
PAL 100 fps
Recording FPS NTSC 30fps@D1 (real time recording) per camera
PAL 25fps@D1 (real time recording) per camera
Playback FPS NTSC 30fps@D1 (real time playback)
PAL 25fps@D1 (real time playback)
Display mode Spherical 360 degree image
Multi-function Recording/Playback
Resolution
Display NTSC 720 x 480
PAL 720 x 576
Recording
NTSC 360*240@CIF
720*480@D1
PAL 360*288@CIF
720*576@D1
Compression
Quality H.264 1(poor) ~ 5(excellent)
Storage SDHC
Back up With CARBOX software

Popo cams by Eclipse 360º Surveillance Digital Recording System
3
Camera
Signal type NTSC PAL
Sensor 1/4 inch CMOS *4PCS
Video processor Digital
Pixel 640 (H)×480 (V) 640 (H)×576 (V)
Total pixel 300K 370K
Resolution 420 lines
Input voltage DC 12 ± 1V
Current 200mA (IR OFF)
Sync . system Internal Synchronization
Scan system 2:1 crossover
Sensitivity 10 V /(Lux-sec) / 0Lux(IR ON)
Signal to Noise
Ratio Max. 45 dB
Playback Mode time/date, event
Full screen Yes
LED indicator 3 LED (REC、GPS、POWER)
Brightness Yes
Contrast Yes
Signal off
Detection Yes
Buzzer Yes
GPS G-MOUSE (Optional) with Google Map display
G-SENSOR Yes
IR Yes
Extending IR Yes
Monitoring Mode Auto recording after power on
Power input (1) DC 8V~32V (2)ACC Auto Power-off Programmable
Dimension 115X90X30(mm)

Popo cams by Eclipse 360º Surveillance Digital Recording System
4
Auto-zenith
control Open automatically
Dynamic range 65 dB
Auto-balance Automatic
Shutter status Automatic
Viewing angle H : 360° V : 70°
Signal output 1 Vp-p standard video output,75 Ω
IR LED 4PCS
IR range 1m
Operation
Temperature - 10° C ~ +60°C
Notes: 1. Storage devices purchase separately.
2. No further notification on product specification changes.
C. Accessories
1. In the box：
(1) Device (2) Camera (3) Power cord (black/blue/red)
(4) Alarm cable (black/yellow) (5) IR extension cord
(6) Remote controller (7) Microphone (8) Velcro strap
(9) Sticker (10) Bracket mount (11) CD
(12) Quick start guide
2. Option：
(1) G-Mouse (2) SD card

Popo cams by Eclipse 360º Surveillance Digital Recording System
5
D. Product Dimension
1. Mobile DVR Dimension
(1). Power Light
(2). Recording Light
(3). GPS Light
(4).IR receiver
(5).SDcard Slot
(6). GPS Connector：To connect with G-Mouse (GPS sensor)
to start GPS function. It can record vehicle location,
speed, longitude and latitude.
(7). Audio output: “A”means “audio output”.
(8). Video output: “V”means “video output”
(9). Micphone hole：To connnect with microphone to

Popo cams by Eclipse 360º Surveillance Digital Recording System
6
recording audio.
(10). Alarm Input: Alarm input connector.
(11). Camera connector: In pair with AVM-360PV, it can
support 360 degree recording.
(12). IR extension cable connector: Once upon connecting
with the extension cable, the IR receiver will be adjusted
to the end of cable.
(13). PowerConnector: To cooperate with power management
function (in OSD), it can provide 「Delay Shutdown」
function.
Dimension (Unit: mm)

Popo cams by Eclipse 360º Surveillance Digital Recording System
7
2. Appearance of Camera
1. Lens 1 (Front)
2. Lens 2 (Right)
3. Lens 3 (Inner)
4. Lens 4 (Left)
5. Cable collect slot
6. 3M tape
Dimension (Unit: mm)

Popo cams by Eclipse 360º Surveillance Digital Recording System
8
E. Installation
1. DVR Wiring Diagram
Power Cable (Black/Blue/Red)
1. RED：Positive Port (DC8~32 input)
2. Blue : ACC control
3. Black: GND

Popo cams by Eclipse 360º Surveillance Digital Recording System
9
Alarm Cable
1. Yellow：Positive Alarm Input (12V)
2. Black：GND
Notice
(1). To protect your vehicle, please have professional technician to
install this mobile DVR.
(2). Please keep all the connecters clean from dust with temporary
tape during installation. If not, dust gets into connector may
cause connect failure.
(3). After complete wiring, please tape all connectors firmly to
prevent damaging by water or loosing.
(4). Power cable need to install behind the ACC (key starter) and
fuse to prevent running out the power of battery.
(5). Main Engine needs to be installed firmly in flat place to prevent
damaging by shocking.

Popo cams by Eclipse 360º Surveillance Digital Recording System
10
2. Camera Installation Diagram
1. Install camera on windshield
b
y
adhesive bracket.
2. Pick up a best location for
installation.
3. To adjust a best view angle. 4. To connect power cable to
Mini USB hole.
5. To connect the other end with the “Video In” slot in DVR.
Notice
(1). The best installation location of camera in the windshield
should be under the area that wiper could achieve.
(2). Before using, please adjust proper time-setting and time zone
setting in OSD directly.
Sticker Adhesive Spot

Popo cams by Eclipse 360º Surveillance Digital Recording System
11
3. How to install Memory Card
(1). To loose the screws then move the cover to install
memory card.
(2). See how to format in another chapter.
Note：SD Card is optional accessory
Notice
(1). Suggest to use Transcend SDHC Card (Class 10/ 4G at least)
(2). When using a new card, please format SD card in main
engine or in player first.
(3). Before using the memory disk, please format the disk first
using the software player in the CD-ROM. If not, device will
automatically erase all data in the memory disk before
recording.
(4). Please do not use Micro SD card adapt to SD card for using, it
may cause connect fail when vehicle moving and shocking.
(5). Memory card has life limit. Please check it regularly and to
playback the footages in your PC will be better for card using.

Popo cams by Eclipse 360º Surveillance Digital Recording System
12
F. ON/OFF
ON：
Insert SD card into slot in main engine, connect the power to
start. Waiting for around 30 seconds, it will be booted when
the power light on.
OFF：
Turn off the power supply, it will stop recording automatically. You
can take off the SD card to read footages in PC by card reader.

Popo cams by Eclipse 360º Surveillance Digital Recording System
13
Light Signal：
● Power Light (GREEN)：
No light = No power supply.
Light on = Stable power supply.
● Recording Light (RED)：
No light = No recording.
Light Blinked = On recording.
Light Blinked Fast = On force recording.
● GPS Light (BLUE)：
No light = Not position yet.
Light Blinked = Position successfully.
Notice: When you playback in main engine, it will stop
recording at the same time.

Popo cams by Eclipse 360º Surveillance Digital Recording System
14
G. Remote Controller Introduction
Button Description
CH 1~4 Choose 1-4 CH to display footages when in
real time monitoring or playback.
Force Record
Event Recording will be saved particularly.
It will save every 3 minutes before and after
the event to make sure it’s not be
overwritten.
Quad display Show quad display when in real time
monitor mode.
Mute When in real time monitor mode, do not
record audio.
CH2 display
Force Record
Quad display
Menu
Up, Down, Left, Right
Fast Forward
Stop
Pause
CH1 display
CH3 display
CH4 displa
y
Mute
Ente
r
Fast Rewind
Play

Popo cams by Eclipse 360º Surveillance Digital Recording System
15
Menu Open main menu or back to front page.
Up, Down,
Left, Right
When enter menu, use these 4 buttons to
choose function.
Enter Enter the function you choose or save the
setting you choose.
Fast Rewind Rewind the footage when playback.
Fast Forward Forward the footage when playback.
Play To playback footage when in real time
monitor mode.
Pause To pause the playing when in real time
monitor mode.
Stop To stop playing and back to front page
when playback.
How to check if the remote
controller is workable?
√ Check the mercury cell is installed in
correct direction. (Check the pole)
√ Check if the cell power is exhaust.
√ Check if the sensor is covered.
√ Check if it nears by Fluorescent
Lamp.

Popo cams by Eclipse 360º Surveillance Digital Recording System
16
H. Real Time Monitoring Mode
The screenshot of real time monitoring mode:
Signal Description
On recording.
GPS sensor position successfully.
Microphone on.
Hand Force Recording on.
G-Sensor is triggered, force recording
automatically on.
1/2/3/4 Display of channel 1/2/3/4
Vehicle speed. It needs to do setting through
player in advance. (Please see detail in part of
“SD card format.”)
Remote Controller Operation Instruction
● To show single 1~4 channel display，press
● To show quad display, press
● To open menu, press
● To playback, press