Eco-Systems ECO-12K Manual

866.463.2611 •www.ecosystemsdisplays.com
Setups
Locked layer contains
placeholder marks.
Wire
Management
When assembled
Item
1
2
3
4
5
6
Qty.
1
1
1
1
1
1
Description
Base Plate
42.639”h Z31 Curved Vertical Extrusion
4”w Z32 Horizontal Extrusion
44.417”h RSG510 Round Vertical Extrusion
iPad Swivel Stop Mount
iPad Clamshell Case.
Steps:
1) Connect vertical extrusions [2] & [4] together using horiztonal
extrusion [3].
2) Attach base plate using provided bolts. See detail.
3) Connect iPad Swivel Stop Mount to vertical extrusion [4].
4) Attach iPad Clamshell using provided hex nuts. See detail.
5) Connect Graphic Infill.
2
3
4
1
5
6
Graphic Infill
Wire Management for iPad
Feed iPad charging cord through holes from top
to bottom of post as shown.
Hex
Nuts
Clam Shell rotates
between portrait
and landscape
viewing modes.
Swivel
Mounting Plate
Swivel iPad
Clamshell Attachment
Bolt iPad clamshell to mounting
plate with hex nuts.
Wire
Access
iPad
Lock
Lock
*
*
Order #XXXXX - ECO-12K iPad Stand

866.463.2611 •www.ecosystemsdisplays.com
A7
General Setup Instructions
•The setup instructions are created specifically for your configuration.
•Setup instructions are laid out sequentially in levels, including exploded
views and a logical series of steps for assembly. We encourage you to study
the instructions before attempting to assemble your exhibit.
Hex Tool for Assembling Exhibit Extrusion Lock Connectors
Numbering Instructions for Setups/Packing Inline Connection between Extrusions Baseplate Connection for Vertical Extrusions
Cleaning and Packing
•Use non-abrasive cleaners when cleaning extrusions or ECO Glass inserts.
•Use mild cleaners and soft materials such as cotton to clean all laminates.
•Keep exhibit components away form extreme heat and long exposure to
sun light. This will prevent warping and fading.
•Retain all packing material for ease of re-packing. This protects the exhibit
components and keeps each part organized.
Disassembling
•When disassembling exhibit, tighten all setscrews to prevent loss of hardware
in the shipping process.
General Info