Eco4us EH-Sc1 User manual

Operating Instructions
Model: EH-Sc1
Bamboo Bathroom Scale

Thank you for choosing the Bamboo Kitchen Scale
by Eco4us. To ensure proper operation and maintain the
lifespan and accuracy of the scale, please read this
instruction manual carefully before initial use.
Features
• Eco-Friendly Bamboo Surface
• High Precision Strain Gauge Sensor System
• Capacity: 330lbs. / 150kg.
• Large LCD Display with Backlight
• Auto On / Auto Off
• Low Battery Indicator
• Overload Indicator
• Units of Measurements: lb/kg/st
• Powered By: 2x3V Lithium Batteries - CR2032 (Included)
Operation
1. Locate included batteries and battery compartment
on underside of scale. Open the cover and install batteries
and replace cover. Make sure positive side of batteries
is facing upward.

3. Place scale on hard, flat surface.
4. Wait until LCD display is off/clear.
5. Step onto the scale and weight will be displayed.
6. Remain on scale platform. LCD will begin flashing when
weight is locked in, usually 2-3 seconds. LCD will stop
flashing and display your weight for approximately 10
seconds.
7. Scale will turn off automatically.
Caution
1. To ensure consistent readings, we recommend taking
weight measurements at the same time each day.
2. When the screen displays “LO”, this is a low battery
warning indicator. Please replace the batteries.
3. When the screen displays “Err”, this is the overload
warning indicator.
2. To change the unit of measurement lbs/kg/st, press the
“Unit” button located on the back of the scale.

Eco4us, Inc.
www.eco4us.com
Always place scale on a solid, flat surface and make sure
scale is stable before use.
330lbs. or 150kg.
Clean scale with a soft, slightly damp cloth. The scale is not
waterproof and should not come in contact with water. The
Bamboo surface can be cleaned using mild cleaner.
This scale is a high precision measuring device, please
handle with care.
If the scale fails to turn on, make sure the batteries
have been installed properly and that the battery’s
power is not low.