ECX WRA-LSL-X01-B User manual

ASSEMBLY INSTRUCTIONS
PAGE 1
LATTICE STACKING CUBE - CUBICLE
WRA-LSL-X01-B
WRA-LSL-X01-B

PARTS LIST:
PAGE 2
LATTICE STACKING CUBE - CUBICLE
° Side ladders (2)
° Center ladders (3)
° Top & bottom stabilizers (4)
TOOLS REQUIRED:
* Utility knife
* Cordless drill or Phillips head screwdriver
° 1-1/4" screws (30)
WRA-LSL-X01-B
1. Attach side and center ladders to bottom stabilizers using (10)
of the 1-1/4” screws through the pilot holes.
A) Place left side ladder and
screw to bottom stabilizer using
(2) screws.
B) Place one middle ladder
and screw into bottom
stabilizer using (2) screws.
(do the same with the
remaining two center ladders)
C) Place right side ladder and screw into bottom stabilizer using (2)
screws.
NOTE: Make sure that the angled cuts of the bottle supports are all facing
forward.
Bottom of rack

PAGE 3
4 COLUMN CASE RACK
2. Assemble the top stabilizers using (10) 1-1/4" screws thru the
pilot holes.
WRA-LSL-X02-B