ED Ellen DeGeneres 1658VA-60-267-900-SR User manual

1
ATTACH YOUR RECEIPT HERE
Serial Number__________________ Purchase Date__________________
Questions, problems, missing parts? Before returning to your retailer, call our customer service
department at
1-855-571-1044 , 9 a.m. - 5 p.m., EST, Monday - Friday.
60-IN VANITY WITH TOP
OR
OPTION 1
(Semi-Recessed Sink)
OPTION 2
(Undermount Sink)
Español p. 29
1658VA-60-267-900-SR ED by Ellen Collection 1658 60 in Vanity Rustic Taupe/Semi-recessed Carrara Marble Top
1658VA-60-267-900-UM ED by Ellen Collection 1658 60 in Vanity Rustic Taupe/Carrara Marble Top
1658VA-60-267-907-SR ED by Ellen Collection 1658 60 in Vanity Rustic Taupe/Semi-recessed Pure White Top
1658VA-60-267-907-UM ED by Ellen Collection 1658 60 in Vanity Rustic Taupe/Pure White Top
1658VA-60-267-926-SR ED by Ellen Collection 1658 60 in Vanity Rustic Taupe/Semi-recessed Engineered Calacatta Top
1658VA-60-267-926-UM ED by Ellen Collection 1658 60 in Vanity Rustic Taupe/Engineered Calacatta Top
1658VA-60-278-900-SR ED by Ellen Collection 1658 60 in Vanity Washed Oak/Semi-recessed Carrara Marble Top
1658VA-60-278-900-UM ED by Ellen Collection 1658 60 in Vanity Washed Oak/Carrara Marble Top
1658VA-60-278-907-SR ED by Ellen Collection 1658 60 in Vanity Washed Oak/Semi-recessed Pure White Top
1658VA-60-278-907-UM ED by Ellen Collection 1658 60 in Vanity Washed Oak/Pure White Top
1658VA-60-278-926-SR ED by Ellen Collection 1658 60 in Vanity Washed Oak/Semi-recessed Engineered Calacatta Top
1658VA-60-278-926-UM ED by Ellen Collection 1658 60 in Vanity Washed Oak/Engineered Calacatta Top
MODEL NUMBER DESCRIPTION
MODEL #
1658VA-60-267-900-SR; 1658VA-60-267-900-UM; 1658VA-60-267-907-SR;
1658VA-60-267-907-UM; 1658VA-60-267-926-SR; 1658VA-60-267-926-UM;
1658VA-60-278-900-SR; 1658VA-60-278-900-UM; 1658VA-60-278-907-SR;
1658VA-60-278-907-UM; 1658VA-60-278-926-SR; 1658VA-60-278-926-UM

2
TABLE OF CONTENTS FOR OPTION 1 (Semi-Recessed Sink)
TABLE OF CONTENTS FOR OPTION 2 (Undermount Sink)
Package Contents...........................................................................................................................3
Hardware Contents..........................................................................................................................3
Safety Instructions...........................................................................................................................3
Preparation......................................................................................................................................4
Assembly or Installation Instructions...............................................................................................4
Care and Maintenance...................................................................................................................13
Warranty.........................................................................................................................................13
Replacement Parts List.................................................................................................................14
Package Contents.........................................................................................................................16
Hardware Contents........................................................................................................................16
Safety Instructions.........................................................................................................................16
Preparation....................................................................................................................................17
Assembly or Installation Instructions..............................................................................................17
Care and Maintenance..................................................................................................................26
Warranty........................................................................................................................................26
Replacement Parts List.................................................................................................................27

3
PACKAGE CONTENTS (Semi-Recessed Sink)
SAFETY INSTRUCTIONS
Please read and understand this entire manual before attempting to assemble, operate or install the
product.
WARNING
• There are several assembly steps, including unpacking, that require two adults.
CAUTION
• Follow these instructions closely, take your time, and use care while assembling this vanity.
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
PART DESCRIPTION QUANTITY CARTON
A Vanity 1
B Top 1
D Sink 2
C Backsplash 1
Box 2 of 3
Box 1 of 3
Box 3 of 3
GLeft Door (preassembled
to vanity (A)) 2
Box 2 of 3
FTip-out Door (preassembled
to vanity (A)) 2
HRight Door (preassembled
to vanity (A)) 2
I Shelf 2
J Floor Plumbing Cutout Lid 2
KUpper Drawer
(preassembled to vanity (A)) 1
LMiddle Drawer
(preassembled to vanity (A)) 1
MLower Drawer
(preassembled to vanity (A)) 1
N Drawer Divider 2
S Center Support Leg 1
E Sink Template 2
Sink Template Sink Template
B
C
D
D
E
E
A
F
G
H
I
I
J
K
L
M
N
S
HARDWARE CONTENTS (NOT SHOWN ACTUAL SIZE)
AA
Touch Up Pen
Qty. 1
BB CC DD
Long Handle
(2 Options)
Champagne
brass (Qty. 6)
Matte Black
(Qty. 6)
Short Handle
(2 Options)
Champagne
brass (Qty. 4)
Matte Black
(Qty. 4)
Wrench
Qty. 1

4
INSTALLATION INSTRUCTIONS (Semi-Recessed Sink)
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and hardware contents list. If any part is missing or damaged, do not attempt
to assemble the product.
Estimated Installation Time: 45 minutes (24 hours for silicone caulk to dry).
Tools Required for Installation (not included): Phillips screwdriver, utility knife or scissors, silicone
caulk, power drill with drill bit, measuring tape, level
2
3
1
F
K
L
M
G
H
2
2. Gently open the tip-out door (F) and use the
wrench (DD) to loosen the screws holding
the solid wood tip-out tray. Once loosened,
simply lift and slide up to remove (per
diagram 2). This provides access to the two
door handle screws.
The hardwares are packaged separately in the
box. Select your desired hardware finish, and
attach the hardware to the drawer(s)/door(s),
as illustrated in the diagram.
Repeat the same step for the doors (G & H) and
drawers (K & L & M).
Note: This vanity base comes with two
different door/drawer handle options.
1. With 2 people, place the vanity on its back on
a flat, scratch free surface. Locate the center
support leg (S) and screw into the base of the
vanity. Once complete, lift the vanity back up
into the upright position.
1
S
A
BB
Hardware Used
Long Handle-
Champagne brass x 6
BB Long Handle-
Matte Black x 6
CC Short Handle-
Champagne brass x 4
CC Short Handle-
Matte Black x 4
DD Wrench x 1

5
INSTALLATION INSTRUCTIONS (Semi-Recessed Sink)
3. If you need to adjust the tip-out door, do so in the following manner.
To adjust tip-out door left or right, loosen screws (a) on both hinges, adjust tip-out door, and
retighten screws.
To adjust tip-out door up or down, turn screws (b) on both hinges, in or out.
To adjust tip-out door in or out, loosen screws (c) on both hinges, adjust tip-out door, and
retighten screws.
4. Re-hang the wood tray back inside of the top
tip-out door (F).
3
3
a
1
a
1
C
3
C
1
1
b
22
2
2
2
2
4
F
1
2

6
6. Take out the top (B) and backsplash (C)
according to the steps indicated by the
drawings on the right, and place them face
up onto a scratch free surface such as a
foam sheet that came in the packaging.
INSTALLATION INSTRUCTIONS (Semi-Recessed Sink)
WARNING
Vanity (A) MUST be secured to wall.
Note: Clean area where the vanity (A) will be
permanently located prior to beginning installation,
ensuring the vanity (A) will not interfere with any
water supply and drain lines once mounted.
5. With two people, carefully place vanity (A)
against the wall in its final location.
While holding the vanity base firmly against the
wall, use the pre-assembled levelers on the
bottom of each leg of the vanity (A) to level the
item. Twisting the levelers counterclockwise
will raise the height of the vanity (A), and
twisting them clockwise will lower the vanity.
Once the vanity is in place, against the wall,
and level from front to back and side to side,
drill a hole through the vanity mounting area
and into the wall studs (as illustrated in
diagram 5). Using appropriate mounting
hardware (not included), secure the vanity (A)
to a wall stud. If possible, secure the vanity
(A) to two wall studs for increased stability.
5
12
A
6
Remove the top foam sheet
Foam sheet
C
C
Remove the backsplash and place
it on a scratch free surface
Remove the foam sheet
B

7
INSTALLATION INSTRUCTIONS (Semi-Recessed Sink)
Note: A
t this stage it may be easier to install
the faucet and drain kit (not included) to top (B)
per the manufacturer’s instructions, before
moving on to Step 7.
7.
Apply stain free silicone caulk (not included) to
the top edge of vanity (A). With the help of
another adult, gently lower top (B) onto the
vanity (A). Wipe away any excess caulk with a
soft cloth, and wait approximately 24 hours for
it to dry.
8. Put the sink template (E) on the top (B).
The holes in the cardboard needs to be
aligned with the hole in the stone top.
Make sure the sink template and stone top are
flush along the back edge.
Repeat for the remaining sink template.
7
1
2
2
A
B
8
Sink Template Sink Template
B
E
E

8
INSTALLATION INSTRUCTIONS (Semi-Recessed Sink)
9. Apply a thin bead of silicone caulk (not included)
onto the stone top close to the edge of the sink
cut out as pictured.
Repeat for the remaining stone top.
10. With the help of another adult, Gently lower
the sink onto the stone top using even
pressure to set the sink properly.
Make sure the sink over-flow hole is at the
front of wood cabinet.
If some silicone caulk has over-flowed please
clean it up at that time with water.
Repeat for the remaining sink.
9
Sink Template Sink Template
B
E
E
10
Sink Template Sink Template
D
D
B

9
11. Apply silicone caulk (not included) to unpolished
side and bottom of backsplash (C). Position
backsplash (C) on top (B) and against wall.
Clean any excess caulk before allowing
to dry.
INSTALLATION INSTRUCTIONS (Semi-Recessed Sink)
12. The back of the vanity is open for accessibility
for drain(s) and water line(s) hookup. If your
plumbing comes out of the back wall, insert
the floor plumbing cutout lid (J), as shown in
Illustration 12. This will close the hole and
increase your storage space.
If your plumbing comes out of the floor, this
hole provides accessibility for drain and water
line hookup.
11
1
22
C
B
12
J
A

10
INSTALLATION INSTRUCTIONS (Semi-Recessed Sink)
13. From the front of the assembly, insert shelf
pins at desired height, ensuring they are
level. Place shelf (I) on top of shelf pins.
Repeat for the remaining shelf (I).
14. If you need to adjust the doors, do so in the following manner.
To adjust door up or down, loosen screws (a) on both hinges, adjust door, and retighten screws.
To adjust door left or right, turn screws (b) on both hinges, in and out.
To adjust door in or out, loosen screws (c) on both hinges, adjust door, and retighten screws.
13
1
2
I
I
14
2
2
22
2
2
b
1
1
c
1
c
3
a
1
a
3

11
INSTALLATION INSTRUCTIONS (Semi-Recessed Sink)
15. Insert two drawer divider (N) into the notch of
upper drawers (K) inside.
15
N
K
16. As shown in the diagram, fully extend the
drawer and locate the plastic levers on the
metal glide tracks. Push the left-side and
right-side levers at the same time to
disengage the drawer from the drawer glides.
Gently lift the drawer up to remove it from
vanity (A).
16
A
12

12
INSTALLATION INSTRUCTIONS (Semi-Recessed Sink)
Assembly is now complete. Install desired
faucet and drain assemblies (neither included)
per the manufacturers’ instructions to complete
the installation.
17. To reinstall drawer(s) into vanity (A), fully
extend metal glide tracks. Gently lower and
slide drawer box into rear glide catch. Next,
lower drawer box down to completely rest
on extended glides. Then, push plastic levers
to lock the drawer box in place.
Repeat for remaining drawers.
Note: Drawer box alignment can be adjusted,
if necessary. As shown in the diagram, spin
the adjustment wheel to the left to raise the
drawer box, or to the right to lower the drawer
box. The left and right-side glide heights can
also be adjusted independently in order to find
the drawers best alignment position.
CAUTION
DO NOT force drawer or damage to glide(s) may
occur. If drawer does not slide in with ease,
remove and try again from the start.
17
A
2
1
3

13
CARE AND MAINTENANCE
WARRANTY
IMPORTANT
• Dust the vanity regularly with a soft, non-lint producing cloth or household dusting product.
• You can clean the vanity with a gentle, non-abrasive household cleaner.
• Make sure to dry the wood immediately with a soft cloth or towel.
• The stone top can be cleaned using standard marble cleaning agents available at your local
supplier.
• Tips for using touch-up pen (AA): For scratches, stroke in direction of scratch; for worn areas,
stroke in direction of wood grain. Rub off excess colorant promptly with a soft cloth.
• Shade variations and patterns are an inherent characteristic of stone (e.g. granite, marble,
engineered stone). Stone tops will vary from product to product. Use caution placing items
such as soap or any fragranced material on the stone surface. Use a soap dish, coaster or
similar item to protect the surface if placing any soap or fragranced products on the stone.
• If soap or fragranced products come in contact with the stone top, rinse the surface with water
and dry using a soft non-abrasive cloth.
• WARNING: Must use cleaning agents safe for stone. Check your cleaning agents use
restrictions before using on any stone. Damage to the stone may result. Vanity Manufacturer not
responsible for damage caused by improper cleaning agents or soaps used. Warranty will not
cover damage caused by the use of improper soaps or cleaning agents.
• DO NOT use products to clean the stone top that contain acetone, lemon, vinegar or other
acids as these may cause damage to the stone surface.
• Periodically reseal the stone top using an appropriate stone sealer available from your local
home store. Follow the manufacturer’s directions on how to apply.
The manufacturer warrants this item against defects in materials and workmanship for a period of
one (1) year from the date of original retail purchase. This warranty applies only to the original
purchaser. This warranty does not apply to any damage on the product by accident, misuse, or
modified, improper installation or by affixing accessories not produced by the manufacturer. The
manufacturer will not be held liable for damages caused from cleaners or soaps that etch or stain
the stone top. The manufacturer is not accountable whatsoever for product installation during the
warranty period. There is no further expressed warranty. The manufacturer shall not be legally
responsible for incidental, consequential or special damages arising at or in connection with
product use or performance except as may otherwise be accorded by law. The manufacturer
disclaims any and all implied warranties.

14
REPLACEMENT PARTS LIST FOR 1658VA-60-267-SR (Semi-Recessed Sink)
For replacement parts, call our customer service department at 1-855-571-1044, 9 a.m. - 5 p.m.,
EST, Monday - Friday.
AA Touch-up pen M-1108
1658-CB LONG HANDLE
T-1007
BB Long Handle-champagne brass
1658-MB LONG HANDLELong Handle-matte black
1658-CB SHORT HANDLE
CC Short Handle-champagne brass
1658-MB SHORT HANDLEShort Handle-matte black
WRENCH 01DD Wrench
B1044EE Shelf Pin
FF
Leveler
C-90-107
HH
Hinge
GG PUDTC-14X3-HANDLEDrawer Glide Set
PART DESCRIPTION PART#
Tip-out Door
F1658VA-48/60-267-TIP-OUT DOOR
Left Door
G1658VA-60-267-DOOR SET
Right Door
H
Shelf
I1658VA-60-267-SHELF
Floor Plumbing Cutout Lid
J267 FP LID
Drawer Divider
N1658VA-267-DIVIDER
Tip-out Tray
O1658VA-48/60-267-WOOD TRAY
Upper Drawer Front
P1658VA-267-UPPER DRAWER FRONT
Middle Drawer Front
Q1658VA-267-MIDDLE DRAWER FRONT
Lower Drawer Front
R1658VA-267-LOWER DRAWER FRONT
Center Support Leg
S1658VA-60-267-C LEG
D SN047B
Sink
CPUBS-25-907-60 60" Pure White Backsplash
PUBS-25-900-60
60" Carrara Marble Backsplash
B3500VT-60-907 Complete Set 60" Pure White Top
PUBS-25-926-60
60" Engineered Calacatta Backsplash
3500VT-60-926
Complete Set 60" Engineered Calacatta Top
3500VT-60-900
Complete Set 60" Carrara Marble Top
E SN047B-TEMPLATE
Sink Template
Sink Template
Sink Template
D
G
I
J
F
O
C
E
B
P
Q
H
R
S
N
EE FF HHDDAA GG
BB CC

15
REPLACEMENT PARTS LIST FOR 1658VA-60-278-SR (Semi-Recessed Sink)
For replacement parts, call our customer service department at 1-855-571-1044, 9 a.m. - 5 p.m.,
EST, Monday - Friday.
AA Touch-up pen M-1108
1658-CB LONG HANDLE
T-1007
BB Long Handle-champagne brass
1658-MB LONG HANDLELong Handle-matte black
1658-CB SHORT HANDLE
CC Short Handle-champagne brass
1658-MB SHORT HANDLEShort Handle-matte black
WRENCH 01DD Wrench
B1044EE Shelf Pin
FF
Leveler
C-90-107
HH
Hinge
GG PUDTC-14X3-HANDLEDrawer Glide Set
PART DESCRIPTION PART#
Tip-out Door
F1658VA-48/60-278-TIP-OUT DOOR
Left Door
G1658VA-60-278-DOOR SET
Right Door
H
Shelf
I1658VA-60-278-SHELF
Floor Plumbing Cutout Lid
J278 FP LID
Drawer Divider
N1658VA-278-DIVIDER
Tip-out Tray
O1658VA-48/60-278-WOOD TRAY
Upper Drawer Front
P1658VA-278-UPPER DRAWER FRONT
Middle Drawer Front
Q1658VA-278-MIDDLE DRAWER FRONT
Lower Drawer Front
R1658VA-278-LOWER DRAWER FRONT
Center Support Leg
S1658VA-60-278-C LEG
D SN047B
Sink
CPUBS-25-907-60 60" Pure White Backsplash
PUBS-25-900-60
60" Carrara Marble Backsplash
B3500VT-60-907 Complete Set 60" Pure White Top
PUBS-25-926-60
60" Engineered Calacatta Backsplash
3500VT-60-926
Complete Set 60" Engineered Calacatta Top
3500VT-60-900
Complete Set 60" Carrara Marble Top
E SN047B-TEMPLATE
Sink Template
Sink Template
Sink Template
D
G
I
J
F
O
C
E
B
P
Q
H
R
S
N
EE FF HHDDAA GG
BB CC

16
PACKAGE CONTENTS (Undermount Sink)
SAFETY INSTRUCTIONS
Please read and understand this entire manual before attempting to assemble, operate or install the
product.
WARNING
• There are several assembly steps, including unpacking, that require two adults.
CAUTION
• Follow these instructions closely, take your time, and use care while assembling this vanity.
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
PART DESCRIPTION QUANTITY CARTON
A Vanity 1
B Top 1
D Sink 2
C Backsplash 1
Box 2 of 3
Box 1 of 3
Box 3 of 3
GLeft Door (preassembled
to vanity (A)) 2
Box 2 of 3
FTip-out Door (preassembled
to vanity (A)) 2
HRight Door (preassembled
to vanity (A)) 2
I Shelf 2
J Floor Plumbing Cutout Lid 2
KUpper Drawer
(preassembled to vanity (A)) 1
LMiddle Drawer
(preassembled to vanity (A)) 1
MLower Drawer
(preassembled to vanity (A)) 1
N Drawer Divider 2
S Center Support Leg 1
B
C
D
D
A
F
G
H
I
I
J
K
L
M
N
S
HARDWARE CONTENTS (NOT SHOWN ACTUAL SIZE)
II JJ KK LL MM
Lock Washer
Qty. 8
Nut
Qty. 8
Wrench
Qty. 1
Bolt
Qty. 8
Sink Bracket
Qty. 8
AA
Touch Up Pen
Qty. 1
BB CC
Long Handle
(2 Options)
Champagne
brass (Qty. 6)
Matte Black
(Qty. 6)
Short Handle
(2 Options)
Champagne
brass (Qty. 4)
Matte Black
(Qty. 4)
DD
Wrench
Qty. 1

17
INSTALLATION INSTRUCTIONS (Undermount Sink)
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and hardware contents list. If any part is missing or damaged, do not attempt
to assemble the product.
Estimated Installation Time: 45 minutes (24 hours for silicone caulk to dry).
Tools Required for Installation (not included): Phillips screwdriver, utility knife or scissors, silicone
caulk, power drill with drill bit, measuring tape, level
2
3
1
F
K
L
M
G
H
2
1
S
A
1. With 2 people, place the vanity on its back on
a flat, scratch free surface. Locate the center
support leg (S) and screw into the base of the
vanity. Once complete, lift the vanity back up
into the upright position.
Note: This vanity base comes with two
different door/drawer handle options.
BB
Hardware Used
Long Handle-
Champagne brass x 6
BB Long Handle-
Matte Black x 6
CC Short Handle-
Champagne brass x 4
CC Short Handle-
Matte Black x 4
DD Wrench x 1
2. Gently open the tip-out door (F) and use the
wrench (DD) to loosen the screws holding
the solid wood tip-out tray. Once loosened,
simply lift and slide up to remove (per
diagram 2). This provides access to the two
door handle screws.
The hardwares are packaged separately in the
box. Select your desired hardware finish, and
attach the hardware to the drawer(s)/door(s),
as illustrated in the diagram.
Repeat the same step for the doors (G & H) and
drawers (K & L & M).

18
INSTALLATION INSTRUCTIONS (Undermount Sink)
3. If you need to adjust the tip-out door, do so in the following manner.
To adjust tip-out door left or right, loosen screws (a) on both hinges, adjust tip-out door, and
retighten screws.
To adjust tip-out door up or down, turn screws (b) on both hinges, in or out.
To adjust tip-out door in or out, loosen screws (c) on both hinges, adjust tip-out door, and
retighten screws.
4. Re-hang the wood tray back inside of the top
tip-out door (F).
3
3
a
1
a
1
C
3
C
1
1
b
22
2
2
2
2
4
F
1
2

19
INSTALLATION INSTRUCTIONS (Undermount Sink)
WARNING
Vanity (A) MUST be secured to wall.
Note: Clean area where the vanity (A) will be
permanently located prior to beginning installation,
ensuring the vanity (A) will not interfere with any
water supply and drain lines once mounted.
5. With two people, carefully place vanity (A)
against the wall in its final location.
While holding the vanity base firmly against the
wall, use the pre-assembled levelers on the
bottom of each leg of the vanity (A) to level the
item. Twisting the levelers counterclockwise
will raise the height of the vanity (A), and
twisting them clockwise will lower the vanity.
Once the vanity is in place, against the wall,
and level from front to back and side to side,
drill a hole through the vanity mounting area
and into the wall studs (as illustrated in
diagram 5). Using appropriate mounting
hardware (not included), secure the vanity (A)
to a wall stud. If possible, secure the vanity
(A) to two wall studs for increased stability.
5
12
A

20
INSTALLATION INSTRUCTIONS (Undermount Sink)
6. Take out the top (B) and backsplash (C)
according to the steps indicated by the
drawings on the right, and place them face
down onto a scratch free surface such as a
foam sheet that came in the packaging.
7 Apply silicone caulk (not included) to
the top edge of sink (D). With the help of
another adult, lower the sink onto the back
side of the stone top.
Make sure the sink over-flow hole is facing
the front of stone top.
Be sure to align the sink well with the stone top
cut out allowing for equal stone overhang on the
front, back and sides of the ceramic sink (D).
Repeat for the remaining sink.
Note: To install the sink onto the top correctly,
ensure that the two "BACK" stamps on the sink
and the top are aligned on the same sides.
Use the guide lines marked on the sink and
bottom side of stone top to assist with sink
location.
6
Remove the top foam sheet
Remove the foam sheet
Remove the cutout foam
sheet & hardware
Remove the top and place it
on a scratch free surface
Remove the backsplash and place
it on a scratch free surface
C
Foam sheet
C
B
BACK
FRONT
BACK
FRONT
B
BACK
FRONT
BACK
FRONT
Foam sheet
1
2
12
B
BACK
FRONT
BACK
FRONT
Hardware
Pack
Hardware
Pack
7
BACK
1
2
2
2
2
BACK
BACK
BACK
BACK
D
D
B
Sink Lip
Top
BACK
BACK