EDIC-mini Weeny A110 User manual

Short Operating Instruction for EDIC-mini Weeny
Purpose
Еdic-mini Weeny Recorders are professional devices intended for making high quality record of voice messages into built-in flash memory. The
recordings can be further uploaded onto the PC/tablet/smart phone and other devices supporting external carrier connection. The family includes
small-sized voice recorders featuring digital microphones and internal flash memory. The records have digital markers, which helps to prevent
record from unauthorized changes, as well as significantly increase its evidentiality.
Main technical characteristics of the recorders
Model
Power supply
Dimensions
(mm)
Weight
(g)
Autonomy
(hours)*
Signal-to-
noise, dB
Sensitivity
Bit depth
(bit)
Sampling rates
(kHz)
Frequency band
(kHz)
Weeny A110
rechargeable battery 20mA
29x24х4
4
17
65
15
up to 24
8;16;22
0,1-10
Weeny A111
rechargeable battery 55mA
37.5х24х3,5
6
50
65
15
up to 24
8;16;22
0,1-10
Weeny A112
rechargeable battery 16mA
38х24х2
4
14
65
15
up to 24
8;16;22
0,1-10
Weeny A113
rechargeable battery 20mA
37х15х4,5
4
17
65
15
up to 24
8;16;22
0,1-10
*recording duration is specified for record mode 8kHz/16 bit, the autonomy is lower with higher sampling rate or bit depth. Current in standby
mode 1 μA. Current in record mode 8kHz / 16bit 1.4 mA.
- PC communication interface - USB 2.0.
- Permissible temperature of operation and storage 0 .. + 50C
- Operating lifetime 3 years
Main Features
1. Voice Activation System (VAS)
2. Timers to start recording at the preset time (daily or once)
3. Linear and circular recording
4. Built-in clock, calendar, attachment of records to time and date
5. Password protection of the access to records
6. Built-in markers to determine records' authenticity
7. Control and indication: on / off buttons and LED
8. Support Windows/Mac/Linux/Android/Apple and other OS supporting external device connection
Recorder’s memory fil depends on the selected recording mode:
RecordMode
Max time until memory is full (unless VAS or circular recording is enabled)
0 –PCM 22 kHz 24 bit
1 hour
1 –PCM 22 kHz 16 bit
1 hour 30 min
2 –PCM 16 kHz 24 bit
1 hour 30 min
3 –PCM 16 kHz 16 bit
2 hours 15 min
4 –PCM 8 kHz 24 bit
3 hours
5 –PCM 8 kHz 16 bit
4 hours 30 min
6 –uLaw 8 kHz 8 bit
9 hours
7 –ADPCM 8 kHz 4 bit
18 hours

Getting Started
For recorders with rechargeable batteries, first make sure the rechargeable battery is fully charged. Charge the battery if necessary by using
interface cable from the delivery set to connect the Recorder to the PC or power supply (e.g. of a smartphone) with output voltage 5V and a
standard USB output.
Charging process is accompanied by smooth lightening and attenuation of LED with an interval of 1 to 4 seconds, depending on the current
battery charge level. The shorter the interval, the fuller battery charge level is. With battery fully charged, this interval decreases to zero. Full
charging takes about 2.5 hours.
When charging is completed, disconnect the cable from the computer or charger.
Important!!! In order to avoid deep discharge and related damage of the rechargeable battery, the Recorder must not be stored with a discharged
battery and the device must be charged at least at least as specified in the table with parameters of the recorders. The failure of the battery due to
its deep discharge is a violation of the rules of operation.
Recording
To enable recording keep the START button pressed for about a second until the LED starts flashing. The LED flashes 3 times, and recording
starts. During recording the LED flashes in two series, the number of flashes indicating:
Number of flashes
Battery charge level (1st series)
Free memory capacity (2nd series)
1
80-100%
75-100%
2
20-80%
50-75%
3
2-20%
25-50%
4
1-25%
To stop recording, keep the OFF button pressed until the LED lights continuously.
Recording also automatically stops when the battery is completely discharged or when the memory is full.
Recording can also be enabled with the start of charging process.
Record Playback
To playback, copy or delete the records made, connect the Recorder to the PC using interface cable. The Recorder is recognized in the PC as a
removable media (flash drive). The Recorder's drive contains records in wav format (to playback them use any media player) and a config.ini
configuration file with the settings of the Recorder.
Important!!! Creating or saving files (except for the settings file) on the Recorder's drive is unavailable.
For more detail on operating records, file name interpretation see full Operation Manual
Setting the Recorder's Parameters
To configure the Recorder's parameters, set its internal clock and password, open config.ini in any word processor and set the desired parameters.
The Recorder's clock synchronizes automatically with the PC as the configuration file is saved.
For more detail on the Recorder's configuration see full Operation Manual
RESET
In case of a malfunction of a rechargeable battery recorder, use any metal object (paper clip) to close the reset contacts (RESET on the case).
In Box:
Recorder
Interface cable
Operation manual
Package box

Warranty
The manufacturer undertakes warranty repair liabilities for 1 year from the date of purchase, but no longer than 2 years from the date of
manufacture of the product (warranty does not cover batteries), other rules are regulated by the Law "On Protection of Consumers' Rights".
Further there is usually a long list of cases when the user loses warranty. We have a different approach. We make use of every warranty case as
an opportunity to find out the causes and make our products better. Therefore, we are always grateful for any comments and proposals regarding
our products, as well as the detailed description of the conditions and causes that led to failure. We appreciate time and skills of our customers,
and if the problem is not that complicated, we do not mind if you try to solve the problem yourself. If the attempt to repair was fairly neat, you do
not lose your warranty. In case of major breakdowns, chemical exposure or mechanical damage to the Recorder, the manufacturer will not be
able to continue the warranty service of this device. Our products have no seals.
If you are experiencing problems with the use of our products, we recommend the following:
1. Go to www.ts-market.com and see a list of common problems (FAQ section) and their solutions. Perhaps there is a solution to your problem.
2. If the problem persists, contact technical support at [e-mail] with the detailed description of your problem, the conditions it
appeared, the exact product name according to the passport, firmware, software, operating system, and other relevant information. Remember,
the better you describe the problem, the sooner it is resolved. Calls and mails like "It doesn't work at all!" are least effective. E-mail
correspondence is most effective because it preserves history and minimizes misunderstanding. You will receive a response to your
request by e-mail within 24 hours (excluding weekends and holidays).