Edimax IC-5160GC User manual

IC-5160GC
Quick Installation Guide
06-2016 / v1.0

2
Package Contents
QIG
CD-ROM
Power
Adapter
Ethernet
Cable
Screws
IC-5160GC
Connector Wires
USB Garage
Accessory
Wall Mount
Screwdriver

3
LED Status
LED
LED Color
LED Status
Description
Power
Green
On
Network camera is on and
connected to cloud server.
Quick Flashing
Network camera is restarting.
Slow Flashing (1 x
per second)
Network camera is starting up or
network camera is not connected
to cloud server.
LAN
Green
On
Network camera is connected to
the local network.
Quick Flashing
LAN activity (transferring data).
Slow Flashing (1 x
per second)
WPS is active.
Internet
Orange
On
Connected to Internet.
Quick Flashing
Network camera is restarting.
Slow Flashing (1 x
per second)
Not connected to Internet.

4
Camera Setup
Follow the instructions below to connect your network camera to your Wi-Fi
using the EdiLife smartphone app. Refer to the chapter Garage Door to
connect the product to your garage door terminal.
Your network camera’s unique SSID is displayed on the product label on
the network camera and consists of “EdiView.Setup **” where ** are the
last two characters of your camera’s unique MAC address.
1. Connect the network camera to a
power supply using the included
power adapter.
2. Wait a moment for the camera to
power on. The green power LED will flash slowly when it’s ready.

5
3. Use a smartphone or tablet to search, download and install the EdiLife app
from Google Play or the Apple App Store.
4. For iOS users, go to your iPhone’s Wi-Fi settings and connect to your
network camera’s SSID (EdiView.Setup **), before opening the EdiLife app.
Continue to Step 7.
5. Android users open the EdiLife app and tap the +icon in the top-right
corner of the screen.

6
6. Android users select your camera from the available wireless device list
and wait a moment for the app to make a connection.
Tap refresh in the top right corner if your
camera isn’t listed.
7. For better security, enter a new device name and password when
prompted. Tap Done to continue.

7
8. Select your Wi-Fi from the list and enter your Wi-Fi password. Tap OK to
continue.
Tap refresh in the top right corner if your Wi-Fi
isn’t listed.
9. Please wait a moment while your camera connects to your Wi-Fi. When
you see the Setup complete screen, click the LIVE icon or tap the arrow to
continue.

8
10. Setup is complete. The camera’s green power LED & orange Internet
LED should display on. Your camera should be listed on the EdiLife home
screen. Tap your camera to see a live stream which you can view anytime
you are connected to the Internet.
You can configure your camera’s settings and functions using the icons
below the live image.
11. If you have a microSD card, insert the card into the microSD slot on
the back on the network camera.

9
WPS
The WPS (Wi-Fi Protected Setup) button is a quick and easy alternative to
establish a secure wireless connection between your network camera and
your wireless router/access point.
1. Press and hold the WPS button on your wireless router/access point for
the correct length of time to activate its WPS.
Please check the instructions for your
wireless router/access point for how long
you need to hold down its WPS button to
activate WPS.
2. Within two minutes, press the WPS/Reset button on the network camera
for 2 –5 seconds to activate WPS. The green LAN LED will flash slowly to
indicate that WPS is active.
Take care not to hold the WPS/Reset button too long and reset
your network camera.
3. The devices will establish a secure
wireless connection. The green LAN
LED will flash quickly for two minutes
to indicate a successful WPS
connection.

10
Using Your Network Camera
As well as the EdiLife app, you can use the camera’s web-based management
interface to see a live stream and to configure the camera’s functions such as
motion and sound detection.
Go to the camera’s IP address in a web browser on a computer connected to
the same local network:
You can find your network camera’s IP address using EdiView Finder on a
computer, or using the EdiLife smartphone app (go to Settings). Check the
user manual for help.

11
Garage Door
The product can be connected to a garage door motor/terminal using the
included connector cable. After installation, use the EdiLife app to remote
control your garage door from your smartphone.
Disconnect your IC-5160GC and garage door terminal from any power
supplies before attempting installation. Refer to the manufacturer’s
instructions for your garage door model and always proceed with caution
when wiring electrical appliances. If you have any doubts consult a
professional technician.
1. Plug the USB garage accessory into the USB port on the bottom of your IC-
5160GC.
2. Use a screwdriver to loosen the screws on the top of the USB garage
accessory.

12
3. Insert the ends of the two connector wires firmly into the +and –
terminals on the underside of the USB garage accessory.
4. Tighten the screws on top of the USB garage accessory to secure the wires
in place.

13
5. Remove the case on your garage door terminal/motor and follow the
manufacturer’s instructions to connect the other end of the included wires.
Check the manufacturer’s documentation when opening and connecting
your terminal. Procedure varies according to brand and model. Example
shown below:

14
6. Check everything is correctly attached and that your terminal is closed and
secure, and then connect the IC-5160GC to a power supply.
7.The USB garage accessory’s green LED should display on.
8. And the camera’s green power LED & orange Internet LED should display
on.

15
9.Open the EdiLife app and you can open/close your garage door using the
icon on the Live view page. Other settings can be found in Advanced.

16
Wall Mount
A wall mount is included in the package contents to fix your camera to the
wall. The stand requires some assembly. It’s recommended to connect your
product to the garage door terminal/motor before installing the wall mount.
1. Attach the wall-mount to a wall using the included screws as shown below:
2. Attach the rear of the network camera to the mounting stand and tighten
into place, as shown below:

17
Reset
If you experience problems with your network camera, you can reset the
camera back to its factory default settings. This resets all settings back to
default.
1. Press and hold the WPS/Reset button found on the side panel for at least
10 seconds.
2.Release the button when the orange Internet LED is flashing quickly.
3. Wait for the network camera to
restart. The camera is ready when the
green power LED is flashing slowly.
After setup, the green power LED
will display on to indicate a
successful connection to the cloud
server.

18
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio technician for help.
FCC Caution
Any changes or modifications not expressly approved by the party responsible for compliance could void the
authority to operate equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels
is not possible. This device and its antenna(s) must not be co-located or operating in conjunction with any other
antenna or transmitter.
R&TTE Compliance Statement
This equipment complies with all the requirements of DIRECTIVE 1999/5/EC OF THE EUROPEAN PARLIAMENT AND
THE COUNCIL of March 9, 1999 on radio equipment and telecommunication terminal equipment and the mutual
recognition of their conformity (R&TTE). The R&TTE Directive repeals and replaces in the directive 98/13/EEC
(Telecommunications Terminal Equipment and Satellite Earth Station Equipment) As of April 8, 2000.
Safety
This equipment is designed with the utmost care for the safety of those who install and use it. However, special
attention must be paid to the dangers of electric shock and static electricity when working with electrical
equipment. All guidelines of this and of the computer manufacture must therefore be allowed at all times to
ensure the safe use of the equipment.
EU Countries Intended for Use
The ETSI version of this device is intended for home and office use in Austria, Belgium, Bulgaria, Cyprus, Czech,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Turkey, and United Kingdom. The ETSI
version of this device is also authorized for use in EFTA member states: Iceland, Liechtenstein, Norway, and
Switzerland.
EU Countries Not Intended for Use
None

19
EU Declaration of Conformity
English: This equipment is in compliance with the essential requirements and other relevant
provisions of Directive 1995/95/EC, 2011/65/EC.
Français: Cet équipement est conforme aux exigences essentielles et autres dispositions de la
directive 1995/95/CE, 2011/65/CE.
Čeština:Toto zařízení je v souladu se základními požadavky a ostatními příslušnými ustanoveními
směrnic 1995/95/ES, 2011/65/ES.
Polski: Urządzenie jest zgodne z ogólnymi wymaganiami oraz szczególnymi warunkami
określonymi Dyrektywą UE 1995/95/EC, 2011/65/EC..
Română:Acest echipament este în conformitate cu cerinţele esenţiale şi alte prevederi relevante ale
Directivei 1995/95/CE, 2011/65/CE.
Русский: Это оборудование соответствует основным требованиям и положениям Директивы
1995/95/EC, 2011/65/EC.
Magyar: Ez a berendezés megfelel az alapvető követelményeknek és más vonatkozó irányelveknek
(1995/95/EK, 2011/65/EK).
Türkçe: Bu cihaz 1995/95/EC, 2011/65/EC direktifleri zorunlu istekler ve diğer hükümlerle ile
uyumludur.
Українська: Обладнання відповідає вимогам і умовам директиви 1995/95/EC, 2011/65/EC.
Slovenčina: Toto zariadenie spĺňa základné požiadavky a ďalšie príslušné ustanovenia smerníc
1995/95/ES, 2011/65/ES.
Deutsch: Dieses Gerät erfüllt die Voraussetzungen gemäß den Richtlinien 1995/95/EC, 2011/65/EC.
Español: El presente equipo cumple los requisitos esenciales de la Directiva 1995/95/EC,
2011/65/EC.
Italiano: Questo apparecchio è conforme ai requisiti essenziali e alle altre disposizioni applicabili
della Direttiva 1995/95/CE, 2011/65/CE.
Nederlands: Dit apparaat voldoet aan de essentiële eisen en andere van toepassing zijnde bepalingen
van richtlijn 1995/95/EC, 2011/65/EC..
Português: Este equipamento cumpre os requesitos essênciais da Directiva 1995/95/EC, 2011/65/EC.
Norsk: Dette utstyret er i samsvar med de viktigste kravene og andre relevante regler i Direktiv
1995/95/EC, 2011/65/EC.
Svenska: Denna utrustning är i överensstämmelse med de väsentliga kraven och övriga relevanta
bestämmelser i direktiv 1995/95/EG, 2011/65/EG.
Dansk: Dette udstyr er i overensstemmelse med de væ sentligste krav og andre relevante
forordninger i direktiv 1995/95/EC, 2011/65/EC.
suomen kieli: Tämä laite täyttää direktiivien 1995/95/EY, 2011/65/EY oleelliset vaatimukset ja muut
asiaankuuluvat määräykset.
-----------------------------------------------------------------------------------------------------------------------
WEEE Directive & Product Disposal
At the end of its serviceable life, this product should not be treated as household or general waste. It
should be handed over to the applicable collection point for the recycling of electrical and electronic
equipment, or returned to the supplier for disposal.

20
Declaration of Conformity
We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the
equipment described below complies with the requirements of the European R&TTE
directive (1999/5/EC, 2006/95/EC) .
Equipment:
Fisheye Wi-Fi Network Camera with Garage Door Control
Model No.:
IC-5160GC
The following European standards for essential requirements have been followed:
Spectrum:
ETSI EN 300 328 V1.9.1 (2015-02)
EMC:
EN 301 489-1 V1.9.2 (2011-09);
EN 301 489-17 V2.2.1 (2012-09)
EMF:
EN 62311:2008
Safety (LVD):
IEC 60950-1:2005 (2nd Edition);Am1:2009;Am2:2013
EN-60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013
Edimax Technology Europe B.V. a company of :
Fijenhof 2, Edimax Technology Co., Ltd.,
5652 AE Eindhoven No. 3, Wu Chuan 3rd Road,
THE NETHERLANDS Wu-Ku Industrial Park,
New Taipei City, Taiwan
Date of Signature:
Apr. 30, 2016
Signature:
Printed Name:
Albert Chang
Title:
Director
Edimax Technology Co., Ltd.
Signature:
Printed Name:
Vivian Ma
Title:
Director
Edimax Technology Europe B.V.