EDM IPC503 User manual
Electronics Design &
Manufacturing PTY LTD
QUICK GUIDE
SMART SOLUTIONS FOR SMART HOMES
Bullet -IPC503
Rev 1.0
What's in the box
Consult the checklist below for all components.
1
Power adapter
Tool Package Instruction Manual
Bullet - Main Unit
Description
Status light
Solid red light: Camera network is abnormal
Blinking red light: Awaiting WiFi connection
Solid blue light: Camera running correctly
Blinking blue light: Connecting
Microphone
SD card slot
Reset
2
DC12V±10%Power
Captures sounds for your video
Speaker
Speak through the APP and talk from the camera
Supports local SD Card storage (Max.128G)
Press and hold for 5 seconds with pin until you hear
the reset tone (This will return the device to factory
default)
Microphone
Speaker
Reset
Status light
SD card slot
3
Install
1Secure the Bullet camera to your roof or wall with the supplied
screws.
1Adjust your camera’s view to the perfect angle using the 3-axis of
rotation then tighten screws with supplied allen key.
(as shown in the picture below) (Please don't over tighten screws)
Connect
Please keep network available
Download
Set up router
4
This device only supports 2.4GHz WiFi frequency, it does not support
5GHz frequency or special characters such as !@#$%^&*(). Please set the
relevant parameters of the router before WiFi configuration. When your
router is configured successfully,allow your phone and device to be
within strong WiFi range to ensure a stable connection.
Interactive Home is available for both IOS and Android. Search “Interactive
Home” on the Apple / Google Play Store, or scan the QR-Code below.
5
Registration Process
Open the interactive Home APP, click "Register",
read the "Privacy Policy" and click "Agree" .
Step 2
Step 1
Input a valid Mobile number or Email address and click
"Get Authentication Code". Once received, input the Veri-
fication Code to finalize login.
QR Code Configuration
Getting started
Process
Open the Interactive Home APP, click "+" or "Add Device".
1.
2.
Step 1
6
Follow the instructions and make sure your passwords are input-
ed correctly.
If this device has previously been registered, reset the device by
holding down the reset button using pin. You will hear a chime
tone and the LED will change from blue to red.
3. Once you have created a home and named your desired rooms
you should be all set to connect your smart device.
Step 2
Step 3
7
Input WiFi password and click "Confirm" & scan the QR Code
with a device. (You can change the network connection
before pairing)
Select “Camera” then “Bullet Cam”. Power the device on and make
sure the indicator is flashing rapidly or a prompt tone is heard.
About 20cm
Step 4
Step 5
8
Click "I heard the beep" when the device chimes and the
configuration should complete within 30s. If no beep is
heard select “Nothing Happened” and follow the instruc-
tions.
Once the device is added, you are able to change the nick-
name and room assignment from this menu (These settings
can be changed in the Home Management settings).
Eva Cam
Bullet Cam - IPC503
Bullet Cam - IPC503
FAQ
9
Q: Why doesn't my camera detect the SD card?
A: It is recommended to plug in the SD card before powering
on the device. Confirm whether the SD card format is FAT32. TF
card wont be identified when the internet environment is
weak.
Q: Why I can’t get push notifications?
A: Please confirm you have opened the Interactive Home APP
and allowed the push notification permissions. Otherwise
change this setting within your phone settings.
Q: How to change camera to a different WiFi network?
A: Firstly, hold down the reset button for 5 seconds till you
hear a chime tone. Then you connect your phone to the new
WiFi and set up camera again.
Q: The device cannot be previewed properly?
A: Check whether the network is normal, you can place the
camera closer to the router, and if not, it is recommended to
reset the device and add it again.
Flip your video stream 180˚for maximum flexibility.
Supports 24/7 continuous recording with high capacity SD storage
(Up to 128GB).
Never miss a moment, even in complete darkness, with powerful
night-vision technology. Night-vision view up to 10m
Functions
Video flip
Motion detection
Record
Day & Night
10
Built-in motion sensors detect movement and will send push
notifications via APP alerts.
Daytime Night
11
Product Ecosystem
Cameras, Lighting devices, Smart switches and Garage door con-
trollers are all able to work together seamlessly from the one APP.
This allows your whole home to be controlled and viewed at the
touch of a button.
Interactive Home
Automation is a big part of the Interactive Home APP. Allowing
time and triggers within our ecosystem to determine specific
actions of your chosen devices. This allows your home to think for
itself without you having to lift a finger.
Home Automation:
Electronics Design &
Manufacturing PTY LTD
ABN: 62 626 667 981
Email: [email protected]
Phone: +61-2 9672 1777
18 Brumby street
Seven Hills, Sydney
NSW, Australian, 2147
Contact Us
Support
AS/NZS 4268:2017, AS/NZS 2772.2:2016, AS/NZS CISPR 32:2015
EN 50130-4:2011/A1:2014, EN 55032:2015, EN 55024:2010/A1:2015
EN 61000-3-2: 2014,EN 61000-3-3:2013
ETSI EN 301 489-1 V2.2.0 (2017-03), ETSI EN 301 489-17 V3.2.0 (2017-03)
ETSI EN 300 328 V2.1.1 (2016-11), EN 62311:2008
EN 60950-1:2006+A11:2009, +A1:2010+A12:2011+A2:2013
Approvals
Table of contents
