Ego Power+ PH1420E User manual

OPERATOR'S MANUAL
56-VOLT LITHIUM-ION
CORDLESS POWER HEAD
MODEL NUMBER PH1420E
WARNING: To reduce the risk of injury, the user must read and understand the
Operator’s Manual before using this product. Save these instructions for future reference.
MNL_EGO_PH1420E_AV01.01_230413

Front Handle
Threshold Ring
Coupler
Quick-release
Lever
Front Handle
Wing Nut
Barrier
Bar
Clamping Block
C1 C2
3. Rear Handle
1. Air Outlet
2. Air Inlet
Wing Knob
Arrow on the Coupler
Arrow on the Attachment Shaft
Attachment Shaft
Power-head Shaft
Shaft-release Button
A
12. Threshold
Ring
10. Wing Knob 11. Coupler
9. Shaft-release
Button
8. Power-head
Shaft
7. Quick-adjust
Front Handle 6. Shoulder-strap
Mount Hanger
5. Speed Indicator
4. High/Low-speed Switch
14. Variable Speed Trigger
13. Lock-off
Lever 15. Rubber Bumper
16. Battery-
release
Button
17. Latch
18. Electric
Contacts
19. Ejection
Mechanism
20. Shoulder strap
B

Mounting Slot
Rib
Mounting
Zone
250 mm
Clamping Block
Speed
Indicator
Lock-off
Lever
Variable
Speed Trigger
High/Low-speed
Switch
C3
E
C4
F
C5 D
Wing Nut
Quick-release Lever
Shoulder-strap
Mount Hanger
Strap Hook
1
2
G

56 VOLT LITHIUM-ION CORDLESS POWER HEAD — PH1420E4
READ ALL INSTRUCTIONS!
READ OPERATOR’S MANUAL
Residual risk! People with electronic devices, such
as pacemakers, should consult their physician(s) before
using this product. Operation of electrical equipment
in close proximity to a heart pacemaker could cause
interference or failure of the pacemaker.
WARNING: To ensure safety and reliability, all repairs
and replacements should be performed by a qualified
service technician.
SAFETY SYMBOLS
The purpose of safety symbols is to attract your attention
to possible dangers. The safety symbols and the
explanations with them deserve your careful attention and
understanding.
The symbol warnings do not, by themselves, eliminate
any danger. The instructions and warnings they give are
no substitutes for proper accident prevention measures.
WARNING: Be sure to read and understand all
safety instructions in this Operator’s Manual, including
all safety alert symbols such as “DANGER,” “WARNING,”
and “CAUTION” before using this tool. Failure to follow all
instructions listed below may result in electric shock, fire,
and/or serious personal injury.
SYMBOL MEANING
SAFETY ALERT SYMBOL: Indicates DANGER,
WARNING, or CAUTION. May be used in conjunction with
other symbols or pictographs.
WARNING: The operation of any
machines can result in foreign objects being
thrown into your eyes, which can result in
severe eye damage. Before beginning
machine operation, always wear safety
goggles or safety glasses with side shields
and a full face shield when needed.
We recommend a Wide Vision Safety Mask
for use over eyeglasses or standard safety
glasses with side shields.
SAFETY INSTRUCTIONS
This page depicts and describes safety symbols that may
appear on this product. Read, understand, and follow all
instructions on the machine before attempting to
assemble and operate it.
Safety Alert Indicates a potential
personal injury hazard.
Read Operator’s
Manual
To reduce the risk of
injury, user must read and
understand operator’s
manual before using this
product.
Wear Eye
Protection
Always wear safety
goggles or safety glasses
with side shields and
a full face shield when
operating this product.
Disconnect
Battery before
maintenance
Alerts user to disconnect
battery before
maintenance.
WEEE
Waste electrical products
should not be disposed
of with household waste.
Take to an authorized
recycler.
IPX4
Ingress
Protection
Degree
Protection from splashing
water
V Volt Voltage
Direct Current Type or a characteristic
of current
GENERAL MACHINE SAFETY WARNINGS
WARNING: Read all safety warnings and
instructions, illustrations and specifications provided
with this machine. Failure to follow the warnings and
instructions may result in electric shock, fire and/or serious
injury.
Save all warnings and instructions for future
reference.
The term “machine” in the warnings refers to your mains-
operated (corded) machine or battery-operated (cordless)
machine.

56 VOLT LITHIUM-ION CORDLESS POWER HEAD — PH1420E 5
WORK AREA SAFETY
◾Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
◾Do not operate machines in explosive atmospheres,
such as in the presence of flammable liquids,
petrol or dust. Machines create sparks which may
ignite the dust or fumes.
◾Keep children and bystanders away while
operating a machine. Distractions can cause you to
lose control.
ELECTRICAL SAFETY
◾Machine plugs must match the outlet. Never
modify the plug in anyway. Do not use any
adaptor plugs with earthed (grounded) machines.
Unmodified plugs and matching outlets will reduce risk
of electric shock.
◾Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
◾Do not expose machines to rain or wet conditions.
Water entering a machine will increase the risk of
electric shock.
◾Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the machine. Keep
cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the risk
of electric shock.
◾When operating a machine outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
◾If operating a machine in a damp location is
unavoidable, use a Ground-fault circuit interrupter
protected supply. Use of GFCI reduces the risk of
electric shock.
PERSONAL SAFETY
◾Stay alert, watch what you are doing and use
common sense when operating a machine. Do
not use a machine while you are tired or under
the influence of drugs, alcohol, or medication. A
moment of inattention while operating machines may
result in serious personal injury.
◾Use personal protective equipment. Always wear
eye protection. Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce
personal injuries.
◾Prevent unintentional starting. Ensure the switch
is in the off-position before connecting to power
source and/or battery pack, picking up or carrying
the tool. Carrying machines with your finger on the
switch or energizing machines that have the switch on
invites accidents.
◾Remove any adjusting key or wrench before
turning the machine on. A wrench or a key left
attached to a rotating part of the machine may result in
personal injury.
◾Do not overreach. Keep proper footing and balance
at all times. This enables better control of the machine
in unexpected situations.
◾Dress properly. Do not wear loose clothing or
jewelry. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewelry or long hair
can be caught in moving parts.
◾If devices are provided for the connection of dust
extraction and collection facilities, ensure these
are connected and properly used. Use of dust
devices can reduce dust-related hazards.
◾Do not let familiarity gained from frequent use of
tools allow you to become complacent and ignore
tool safety principles. A careless action can cause
severe injury within a fraction of a second.
MACHINE USE AND CARE
◾Do not force the machine. Use the correct machine
for your application. The correct machine will do
the job better and safer at the rate for which it was
designed.
◾Do not use the machine if the switch does not turn
it on and off. Any machine that cannot be controlled
with the switch is dangerous and must be repaired.
◾Disconnect the plug from the power source and/or
the battery pack from the machine before making
any adjustments, changing accessories, or storing
machines. Such preventive safety measures reduce
the risk of starting the machine accidentally.
◾Store idle machines out of the reach of children
and do not allow persons unfamiliar with the
machine or these instructions to operate the
machine. Machines are dangerous in the hands of
untrained users.
◾Maintain machines and accessories. Check for
misalignment or binding of moving parts, breakage
of parts and any other condition that may affect
the machine’s operation. If damaged, have the
machine repaired before use. Many accidents are
caused by poorly maintained machines.

56 VOLT LITHIUM-ION CORDLESS POWER HEAD — PH1420E6
◾Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
◾Use the machine, accessories and tool bits etc. in
accordance with these instructions, taking into
account the working conditions and the work to be
performed. Use of the machine for operations different
from those intended could result in a hazardous situation.
◾Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and
control of the tool in unexpected situations.
◾This 56V power head PH1420E may be used with
only the following EGO attachments or subsequently
introduced by EGO for use with this power head:
ATTACHMENT TYPE MODEL NUMBER
Line Trimmer STA1500
Line Trimmer STA1600
Brush Cutter BCA1200
Hedge Trimmer HTA2000
Hedge Trimmer HTA2000S
Pole Saw PSA1000
Edger EA0800
Cultivator CTA9500
Bristle Brush BBA2100
Rotocut RTA2300
BATTERY TOOL USE AND CARE
◾Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used
with another battery pack.
◾Use machines only with specifically designated
battery packs listed below. Use of any other battery
packs may create a risk of injury and fire.
BATTERY CHARGER
BA1400, BA2800,
BA4200, BA1400T,
BA2800T, BA4200T,
BA5600T,BA6720T
CH5500E,
CH2100E,
CH7000E
◾When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys, nails,
screws or other small metal objects that can make a
connection from one terminal to another. Shorting the
battery terminals together may cause burns or a fire.
◾Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help. Liquid
ejected from the battery may cause irritation or burns.
◾Do not use a battery pack or tool that is damaged
or modified. Damaged or modified batteries may
exhibit unpredictable behavior resulting in fire,
explosion or risk of injury.
◾Do not expose a battery pack or tool to fire
or excessive temperature. Exposure to fire or
temperature above 130ºC may cause explosion.
◾Follow all charging instructions and do not charge the
battery pack or tool outside the temperature range
specified in the instructions. Charging improperly or at
temperatures outside the specified range may damage
the battery and increase the risk of fire.
SERVICE
◾Have your machine serviced by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the machine is
maintained.
◾Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
◾If situations occur that are not covered in this manual,
use care and good judgment. Contact the EGO Service
Center for assistance.
SAVE THESE INSTRUCTIONS
ADDITIONAL SPECIFIC SAFETY RULES CAN BE
FOUND IN THE APPLICABLE ATTACHMENT’S
OPERATOR’S MANUAL
SPECIFICATIONS
Voltage 56 V
Weight (Without battery pack) 3.0 kg
PACKING LIST
PART NAME QUANTITY
Power Head 1
Quick-adjust Front Handle 1
Operator's Manual 1
Shoulder Strap 1

56 VOLT LITHIUM-ION CORDLESS POWER HEAD — PH1420E 7
DESCRIPTION
KNOW YOUR POWER HEAD (Fig. A)
1. Air Outlet
2. Air Inlet
3. Rear Handle
4. High/Low-speed Switch
5. Speed Indicator
6. Shoulder-strap Mount Hanger
7. Quick-adjust Front Handle
8. Power-head Shaft
9. Shaft-release Button
10. Wing Knob
11. Coupler
12. Threshold Ring
13. Lock-off Lever
14. Variable Speed Trigger
15. Rubber Bumper
16. Battery-release Button
17. Latch
18. Electric Contacts
19. Ejection Mechanism
20. Shoulder strap (special accessory)
ASSEMBLY
WARNING: If any parts are damaged or missing,
do not operate this product until the parts are replaced.
Use of this product with damaged or missing parts could
result in serious personal injury.
WARNING: Always remove the battery pack from
the product when you are assembling parts, making
adjustments, cleaning, or when the product is not in use.
INSTALLING A POWER HEAD ATTACHMENT
WARNING: Read and understand entire Operator’s
Manual for each optional attachment used on this power
head and follow all warnings and instructions. Failure to
follow all instructions could result in electric shock, fire
and/or serious personal injury.
WARNING: This 56V power head PH1420E is
designed to be used only with the EGO attachment
models that are specified in this Operator’s Manual or
subsequently introduced by EGO for use with this power
head. Use of other, unauthorized attachments could cause
serious personal injuries or property damage.
WARNING: Never install, remove, or adjust any
attachment while the power head is running or with the
battery installed. Failure to stop the motor and remove the
battery can cause serious personal injury.
NEVER OPERATE THE POWER HEAD WITHOUT AN
ATTACHMENT.
The attachment connects to the power head by means of
a coupler device.
1. Stop the motor and remove the battery pack.
2. Loosen the wing knob.
3. Remove the end cap from the attachment. Align the arrow
on the attachment shaft with the arrow on the coupler
and push the attachment shaft into the coupler until
you hear a clear “click” sound, which indicates that the
attachment shaft is mounted into place (Fig. B).
4. Pull the shaft of the attachment to verify it is securely
locked into the coupler. If not, rotate the attachment shaft
from side to side in the coupler until it snaps into place.
5. Tighten the wing knob securely.
WARNING: Be certain the wing knob is fully
tightened before operating equipment; check it
periodically for tightness during use to avoid serious
personal injury.
REMOVING THE ATTACHMENT FROM THE POWER
HEAD
1. Stop the motor and remove the battery pack.
2. Loosen the wing knob.
3. Press the shaft-release button, with the button
depressed, pull or twist the attachment shift out of
the coupler.
MOUNTING AND ADJUSTING THE QUICK-ADJUST
FRONT HANDLE
WARNING: Always remove the battery pack from
the product when you are assembling parts, making
adjustments, cleaning, or when the product is not in use.
1. Stop the motor and remove the battery pack, if installed.
2. Loosen and remove the quick-release lever, barrier bar
and wing nut from the front handle (Fig. C1).
3. Push the front handle onto the shaft within the mounting
zone between the threshold ring and the coupler on the
power-head shaft (Fig. C2).
4. Insert the clamping block into the handle slot (Fig. C3).
5. Align the groove on the barrier bar with the
corresponding one on the front handle; hold the bar

56 VOLT LITHIUM-ION CORDLESS POWER HEAD — PH1420E8
onto the front handle; mount the quick-release lever and
tighten the wing nut. Make sure that the front handle is
positioned upwards and points toward the top of the rear
handle. (Fig. C4).
6. Pull the quick-release lever up to move/rotate the front
handle to a comfortable operating position (Fig. C5).
MOUNTING THE SHOULDER STRAP
Depress the strap hook to open it and attach it onto
shoulder-strap mount hanger on the power head (Fig. D).
OPERATION
WARNING: Do not allow familiarity with this product
to make you careless. Remember that a careless fraction
of a second is sufficient to inflict serious injury.
WARNING: Always wear eye protection. Failure to do
so could result in objects being thrown into your eyes and
other possible serious injuries.
WARNING: Do not use any attachments or
accessories not recommended by the manufacturer of
this product. The use of attachments or accessories not
recommended can result in serious personal injury.
WARNING: NEVER OPERATE THE POWER HEAD
WITHOUT AN ATTACHMENT.
INSTALLING/REMOVING THE BATTERY PACK
NOTE: Fully charge the battery pack before first use.
To Install
Align the battery ribs with the mounting slots and press
the battery pack down until you hear a “click” (Fig. E).
To Remove
Depress the battery-release button and pull the battery
pack out (Fig. F).
WARNING: To avoid serious personal injury, always
remove the battery pack and keep hands clear of the
lock-off lever and variable speed trigger when carrying or
transporting the tool.
STARTING/STOPPING THE POWER HEAD (Fig. G)
To Start
Move the lock-off lever forward and then press the
variable speed trigger to turn on the power head. Different
pressure on the trigger results in variable rotating speed
of the power head. More pressure, higher speed.
To Stop
Release the trigger.
NOTICE: The motor starts only when the lock-off lever
is moved forward and the variable speed trigger is
depressed at the same time.
Changing Speed Mode (Fig. G)
The power head features two speed modes. The low speed
mode provides better control of the tool and longer operating
time per charge.
Press the High/Low-Speed Switch to change cutting speed
between the low and high.
The speed indicator will display the active speed status: one
light for low speed and two lights for high speed. Press the
High/Low-Speed Switch to choose the suitable speed during
operation.
MAINTENANCE
WARNING: Before inspecting, cleaning or servicing
the unit, stop the motor, wait for all moving parts to stop,
and remove the battery pack. Failure to follow these
instructions can result in serious personal injury or
property damage.
WARNING: When servicing, use only identical
replacement parts. Use of any other parts can create a
hazard or cause product damage. To ensure safety and
reliability, all repairs, other than the items listed in these
maintenance instructions, should be performed by a
qualified service technician.
NOTICE: Before each use, inspect the entire product
for damaged, missing, or loose parts such as screws,
nuts, bolts, caps, etc. Tighten securely all fasteners and
caps and do not operate this product until all missing or
damaged parts are replaced. Please contact customer
service or a qualified service technician.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use. Use
clean cloths to remove dirt, dust, oil, grease, etc.
CLEANING THE POWER HEAD
1. Stop the motor and remove the battery pack.
2. Clean dirt and debris from the power head using a
damp cloth with a mild detergent.
NOTICE: Do not use any strong detergents on the plastic
housing or the handle. They can be damaged by certain
aromatic oils such as pine and lemon.

56 VOLT LITHIUM-ION CORDLESS POWER HEAD — PH1420E 9
STORING THE POWER HEAD
1. Remove the battery pack from the power head before
storing.
2. Clean all foreign material from the power head.
3. Store it in a place that is inaccessible to children.
4. Keep away from corrosive agents such as garden
chemicals and de-icing salts.
Protecting the environment
Do not dispose of electrical equipment,
battery charger and batteries/
rechargeable batteries into household
waste!
Contact your local government for
information regarding the collection
systems available.
If electrical appliances are disposed of in
landfills or dumps, hazardous substances
can leak into the groundwater and get
into the food chain, damaging your health
and well-being.
TROUBLESHOOTING
See the applicable attachment’s operator’s manual.

56 VOLT LITHIUM-ION CORDLESS POWER HEAD — PH1420E10
WARRANTY POLICY
For warranty service or to make a claim, please visit our Warranty Portal at egopowerplus.com.au/warranty-policy,
alternatively you can contact EGO customer service via the following, Australia 1300 000 346,
New Zealand 0508 000 346.
Chervon Australia Pty Ltd ABN 36 165 077 501 and Chervon New Zealand Subsidiary Ltd NZBN 9429049277616
(“Chervon”) warrants to the original domestic purchaser that this product will be free from defects in materials and
workmanship for 5 years from date of purchase, and any battery or charger will be free from defects in materials and
workmanship for 3 years from date of purchase. Warranty for commercial use is 1 year on all product, battery and
chargers. The Commercial Range Product Warranty for commercial users is 2 years for product, backpack battery
(BAX1501) and commercial charger (CHX5500E). Please refer to product warranty table below for further clarification.
To make a claim, call 1300 000 346 for AU or 0508 000 346 for NZ or lodge a claim via our portal link above. Any
handling and transportation costs (and other expenses incurred in claiming this warranty) are not covered by this
warranty and will not be borne by Chervon. The replacement product or part or repaired product will be made available
for your collection at an address nominated by Chervon. Where a valid warranty claim is made, Chervon will replace the
defective product or repair the fault. Where the product is repaired, Chervon may use refurbished parts. This warranty
does not cover normal wear and tear, misuse or abuse (including overloading of the product beyond capacity and
exposure to water or rain), accidents, neglect or lack of proper installation, and improper maintenance or storage. This
warranty does not cover the damage resulting from modification, alteration or unauthorised repair. This warranty does
not cover normal deterioration of the exterior finish, including but not limited to scratches, dents, paint chips, or to any
corrosion or discolouring by heat, abrasive and chemical cleaners. This warranty is void if the product has been used
for rental purpose. This warranty may also be further limited or voided as specifically detailed in the product Manual.
Chervon has no other liability under this warranty. The benefits to you given by this warranty are in addition to other
rights and remedies imposed by State and Federal legislation that cannot be excluded. Our goods come with guarantees
that cannot be excluded under the Australian Consumer Law and the New Zealand Consumer Guarantee Act 1993. You
are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss
or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality
and the failure does not amount to a major failure. The warranty applies to the original purchaser and applies only to
purchases made from authorised EGO Dealers, which can be confirmed on the website store locator. For avoidance of
doubt, 3rd party online stores such as eBay, Gumtree, Amazon, etc. are excluded.
Chervon Australia Pty Ltd, Unit 14, 5 Kelletts Rd, Rowville, VIC. 3178.
Ph Australia; 1300 000 346. Email: [email protected]
Chervon New Zealand Subsidiary Ltd, 4th Floor, Smith & Caughey Building, 253 Queen St, Auckland, 1141.
Ph New Zealand; 0508 000 346. Email: [email protected]

56 VOLT LITHIUM-ION CORDLESS POWER HEAD — PH1420E 11
PRODUCT WARRANTY TABLE
PRODUCT OR MODEL #
LIMITED WARRANTY FOR
CONSUMER USE (PERSONAL,
HOUSEHOLD USE)
LIMITED WARRANTY FOR
PROFESSIONAL USE (ANY
COMMERCIAL, AGRICULTURAL,
INSTITUTIONAL,
OR INCOME-PRODUCING USE)
EGO Power+ Outdoor Power Equipment and
Portable Power Products 5 years 1 year
EGO Power+ Battery Packs and Chargers 3 years 1 year
Specific warranties apply to the products below:
Commercial Tools: LBX6000, BCX3800,
STX3800, HTX7500, CSX3000, PPX1000,
PSX2500, PTX5100, BHX1001, STX4500,
BCX4500, EDX2000, HTX5300-P,
HTX5300-PA, LBPX8000
5 years 2 years
Commercial Backpack Battery: BAX1501 3 years 2 years
Commercial Charger: CHX5500E 3 years 2 years