Eizo Foris FX2431 User manual

Important
Please read PRECAUTIONS, this User’s Manual and Setup Manual
(separate volume) carefully to familiarize yourself with safe and effective
usage.
• Please read the Setup Manual (separate volume)
• The latest User’s Manual is available for download from our site:
http://www.eizo.com

2
Using the special functions, such as screen size change (ex. changing the horizontal and vertical ratio of images input)
for commercial purposes or for the purpose of showing in public may violate copyright laws.
Product specication may vary with sales areas.
Conrm the specication in the manual written in language of the region of purchase.
Copyright© 2009 EIZO NANAO CORPORATION All rights reserved.
No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means,
electronic, mechanical, or otherwise, without the prior written permission of EIZO NANAO CORPORATION.
EIZO NANAO CORPORATION is under no obligation to hold any submitted material or information condential
unless prior arrangements are made pursuant to EIZO NANAO CORPORATION’s receipt of said information.
Although every effort has been made to ensure that this manual provides up-to-date information, please note that EIZO
monitor specications are subject to change without notice.
Apple and Macintosh are registered trademarks of Apple Inc.
HDMI, the HDMI logo and High-Denition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
VGA is a registered trademark of International Business Machines Corporation.
Windows, Windows Vista and Xbox 360 are registered trademarks of Microsoft Corporation in the United States and other countries.
The round gothic bold bit map font used for this product is designed by Ricoh.
PlayStation Portable is a product of Sony Computer Entertainment Inc. PlayStation is a registered trademark of Sony Computer
Entertainment Inc.
VESA is a registered trademark or a trademark of Video Electronics StandardsAssociation in the United States and other countries.
EIZO and ScreenManager are registered trademarks of EIZO NANAO CORPORATION in Japan and other countries.
FORIS and PowerManager are trademarks of EIZO NANAO CORPORATION.

3
Notice for this monitor
This product is suited to creating documents, viewing multimedia content, and other general purposes.
This product has been adjusted specically for use in the region to which it was originally shipped. If the product is used
outside the region, it may not operate as specied in the specications.
This product may not be covered by warranty for uses other than those described in this manual.
The specications noted in this manual are only applicable for power cords and signal cables specied by us.
Use optional products manufactured or specied by us with this product.
As it takes about 30 minutes for the performance of electrical parts to stabilize, adjust the monitor 30 minutes or more
after the monitor power has been turned on.
In order to suppress the luminosity change by long-term use and to maintain the stable luminosity, use of a monitor in
lower brightness is recommended.
When the screen image is changed after displaying the same image for extended periods of time, an afterimage may
appear. Use the screen saver or timer to avoid displaying the same image for extended periods of time.
Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime.
(Refer to “Cleaning” on the next page.)
The LCD panel is manufactured using high-precision technology. However, missing pixels or lit pixels may appear on
the LCD panel, this is not malfunction.
Percentage of effective pixels : 99.9994% or higher.
The backlight of the LCD panel has a xed life span. When the screen becomes dark or begins to icker, please contact
your dealer.
Do not press on the panel or edge of the frame strongly, as this may result in the display malfunction, such as the
interference patterns, etc. If pressure is continually applied to the LCD panel, it may deteriorate or damage your LCD
panel. (If the pressure marks remain on the LCD panel, leave the monitor with a white or black screen. The symptom
may disappear.)
Do not scratch or press on the panel with any sharp objects, such as a pencil or pen as this may result in damage to the
panel. Do not attempt to brush with tissues as this may scratch the LCD panel.
When the monitor is cold and brought into a room or the room temperature goes up quickly, dew condensation
may occur inside and outside the monitor. In that case, do not turn the monitor on and wait until dew condensation
disappears, otherwise it may cause some damages to the monitor.

4
Cleaning
Attention
• Never use any solvents or chemicals, such as thinner, benzene, wax, alcohol, and abrasive cleaner, which may damage
the cabinet or LCD panel.
NOTE
• Optional ScreenCleaner is recommended for cleaning the panel surface.
[LCD Panel]
• Clean the LCD panel with a soft cloth such as cotton cloth or lens cleaning paper.
• Remove persistent stains gently with a cloth dampened with a little water, and then clean the LCD panel again with a
dry cloth for better nishing.
[Cabinet]
Clean the cabinet with a soft cloth dampened with a little mild detergent.
To use the monitor comfortably
• An excessively dark or bright screen may affect your eyes. Adjust the brightness of the monitor according to the
environmental conditions.
• Staring at the monitor for a long time tires your eyes. Take a 10-minute rest every hour.

5
CONTENTS
3-2 Color Adjustment........................................... 26
●To select the color mode [Color Mode]............. 26
●To perform advanced adjustments................... 27
●Adjustment items in each mode....................... 27
●To adjust the brightness [Brightness] ............... 28
● To adjust the black level [Black Level].............. 28
●To adjust the contrast [Contrast]....................... 28
●To adjust the color saturation [Saturation]........ 28
●To adjust the hue [Hue] .................................... 29
●To adjust the color temperature [Temperature]. 29
●To change the setting of automatic brightness
adjustment function [Auto EcoView]................. 29
●To compensating the outline of images
[OutlineEnhancer]............................................. 30
●To enable/disable the automatic contrast
adjustment [ContrastEnhancer]........................ 30
● To make ne adjustment of the balance of red,
green, blue (RGB) [RGB Balance] ................... 30
●To adjust the gamma value [Gamma]............... 31
●To adjust the gain value [Gain]......................... 31
●To reduce the noise of images [Noise Filter].... 31
●To set the I/P conversion's processing methods
[I/P Conversion]................................................ 32
3-3 Sound Adjustment......................................... 33
●To adjust the left and right volume balance
[Balance] .......................................................... 33
●To adjust Treble and Bass [Treble] / [Bass]...... 33
●To enable/disable Bass Boost [Bass Boost]..... 33
●To enable/disable Stereo Expander
[Stereo Expander] ............................................ 33
● To adjust the sound level [Sound Level]........... 34
3-4 Power Saving Setting.................................... 35
●To enable/disable the automatic power off setting
when no input signal is detected
[No Signal Off].................................................. 35
●To enable/disable the automatic power off setting
when no operation is done
[No Operation Off]............................................ 35
●To enable/disable the Power Saving mode
[Power Saving (PC)]......................................... 36
3-5 Displaying the Level of Power Saving by
EcoView Index................................................ 37
3-6 Turning Off the Monitor Automatically ........ 37
CONTENTS
Notice for this monitor.............................................. 3
Chapter 1 Features and Overview .....................7
1-1 Features............................................................ 7
1-2 Controls and Functions .................................. 9
1-3 Functions and Basic Operation.....................11
Chapter 2 Operation..........................................14
2-1 Input Signal Switching.................................. 14
2-2 Volume Adjustment ....................................... 14
●To turn the volume up/down............................. 14
●To mute the sound temporarily......................... 14
2-3 Game Image Display...................................... 15
●To set on / off for Thru Mode............................ 15
●To change game screen size............................ 15
●To enable/disable Real Image [Real Image]..... 15
2-4 External Device Controlling (HDMI CEC
Function) ........................................................ 16
●HDMI CEC Function......................................... 16
●To set HDMI CEC [HDMI CEC Setting]............ 17
●To perform play operation and menu operation 17
2-5 PinP (Picture in Picture) Display.................. 19
●To turn PinP display on or off ........................... 19
●To change the output sound............................. 19
●To change the Main Window and Sub-Window
input signal....................................................... 19
●To change the Sub-Window position................ 19
●To set the translucent level for Sub-Window
[Sub-Window Lucent]....................................... 19
2-6 Screen Size Changing................................... 20
●To enable/disable auto changing
[Auto Screen Size]............................................ 20
●To change the screen size manually................ 20
●To set the screen ratio [Screen Ratio].............. 21
Chapter 3 Settings and Adjustments ..............22
3-1 Screen Adjustment........................................ 22
PC2 Input (Only for Analog Input Signal).......... 22
VIDEO2 Input ....................................................... 25

6CONTENTS
3-7 Input Format Setting for HDMI Input
[Input Format] ................................................ 37
3-8 Audio Input Connector Setting for HDMI Input
[Sound Input Jack] ........................................ 38
3-9 Locking Buttons ............................................ 38
3-10 Displaying Monitor Infomation
[Information]................................................... 38
3-11 Setting Power Indicator ON/OFF
[Power Indicator] ........................................... 38
3-12 Setting Language [Language]...................... 39
3-13 Setting EIZO logo Display ON/OFF.............. 39
3-14 Resetting the Setting of the Displayed Menu to
the Default [Reset]......................................... 39
Chapter 4 Troubleshooting...............................40
● Messages List .................................................. 44
Chapter 5 Reference .........................................45
5-1 Attaching an Arm........................................... 45
5-2 Specications ................................................ 46
5-3 Glossary ......................................................... 50
5-4 Preset Timing................................................. 52
TCO’03 ...........................................................54
FCC Declaration of Conformity..........................55
Hinweise zur Auswahl des richtigen
Schwenkarms für Ihren Monitor.........................56
Hinweis zur Ergonomie.......................................56
CONTENTS

7
Chapter 1 Features and Overview
Chapter 1 Features and Overview
Thank you very much for choosing an EIZO color LCD monitor.
1-1 Features
• 24” wide format LCD Applicable to WUXGA(1920×1200)
• Adopting high color gamut panel
Realizing the wide color gamut of 96% of Adobe RGB color space, 92% of NTSC
* This monitor does not support the conversion to sRGB.
• Built-in stereo speakers
• Equipped with a wealth of output and input connectors
DVI-D connector×1, D-Sub mini 15 pin connector×1,
HDMI connector×2, S-Video/video input connector×1, component video input connector×1
• Applicable to the PC input signal using HDMI input. 4 input connectors including PC input are available
• In addition to NTSC, the PAL input signal is supported using S-Video/video input
• Applicable to 1080p @ 24 Hz (48 Hz) using HDMI input and component video input
• USB auto select function
The PC operating the USB devices switches automatically in conjunction with input signal switching.
* This function is available only for the PC connected to PC input.
■USB Selection Setting [USB Selection] (page 14)
• Equipped with the specialized function for displaying of game images
–Thru Mode
Enable to skip image processing and minimize the delay of displaying image
–Real Image
Enable to display game images without dot blurring
2-3 Game Image Display (page 15)
• HDMI CEC (Consumer Electronics Control) function
This monitor supports HDMI CEC. When the monitor is connected to external devices applicable to HDMI CEC, the interactive
control becomes possible and the external device can be controlled with the remote control of the monitor.
2-4 External Device Controlling (HDMI CEC Function) (page 16)
• Power saving function
Suppressing the power consumption reduces the carbon dioxide emissions.
This product is equipped with various power saving functions.
–Power Consumption when main power switch is Off: 0 W
Equipped with main power switch.
Turning off the main power switch completely shuts off power supply to the monitor while the monitor is not used.
–Auto EcoView function
According to the environmental brightness detected by the sensor on the bottom side of the monitor and the brightness of
displayed images, the screen brightness is adjusted automatically. Excessively high brightness may lead a damage to the
natural environment as well as to your eyes. Suppressing the excessively high brightness will be helpful to reduce the power
consumption and the damage to your eyes.
● To change the setting of automatic brightness adjustment function [Auto EcoView] (page 29)
– EcoView Index function
The green indicator shows the power consumption ratio responding to the brightness of the monitor. You can realize the power
consumption reduction by taking consideration in the ratio of power saving.
3-5 Displaying the Level of Power Saving by EcoView Index (page 37)
• Remote control enables easy operation, setting and adjustment of the monitor.
“Remote Control Guide” (separate volume)
• HDCP (High-bandwidth Digital Content Interface)

8Chapter 1 Features and Overview
Connecting to peripheral devices
Enables you to output sound from PC
and AV device by connecting to
speakers and AV amplier.
NOTE
• Enables you to enjoy sound by
connecting a headphone to the
headphone jack.
USB devices
Keyboard
(Also available to connect a printer or a
scanner, etc.)
Attention
• Use a PC/OS applicable to USB devices.
[Applicable OS]
- Windows 2000/XP/Vista
- Mac OS 9.2.2 and Mac OS X 10.2 or later
• USB device does not work when the main
power switch of the monitor is off.
Mouse
PC
Enables you to use as a monitor by connecting to
a Windows PC or a Macintosh.
AV device
DVD player
Game
Enables you to display projected images by
connecting a DVD, Video, game, etc.
D-Sub HDMI
Component
S-Video / Video
DVI
HDMI
Audio device

9
Chapter 1 Features and Overview
1-2 Controls and Functions
Buttons
2 3 4 5 6 718
ScreenManager
®
Color
Sound
PowerManager™
Monitor Settings
Information
[ENTER]: Enter
: Select
Buttons
Setting menu (ScreenManager®*1)
Bottom
1. Select button (SELECT)
●Displays “SELECT” menu.
●Each time you press the button, the content of the menu changes.
2. Enter button (ENTER)
Displays the Setting menu, xes the setting or adjustment items on each menu, and
saves the setting or adjustment results.
3. Control buttons (t/ q/ p/ u)
Used to select the setting or adjustment items, or to increase or decrease the
adjustment values on each menu.
4. Sensor
Detects the environmental brightness.
5. Remote control detector
Receives the signal from the remote control.
6. Power button ( )
Turns the power on or off.
7. Power indicator
Indicates monitor’s operation status.
Indicator status Operation status
Blue Operating
Orange Power saving
Off Power off
8. Main Power Switch
Turns the main power on or off.
*1ScreenManager ®is an EIZO’s nickname of the Setting menu.
NOTE
• You can adjust the volume and change
the input signal in “SELECT” menu.
NOTE
• You can adjust the volume and change
the input signal in “SELECT” menu.
NOTE
• While the screen is displayed, the
power indicator that is lighting blue
can be turned off (see “3-11Setting
Power Indicator ON/OFF [Power
Indicator]” on page 38).
NOTE
• While the screen is displayed, the
power indicator that is lighting blue
can be turned off (see “3-11Setting
Power Indicator ON/OFF [Power
Indicator]” on page 38).

10 Chapter 1 Features and Overview
Remote Control
13
2
7
8
9
10
12
14
4
5
6
11
13
17
16
15
Button Function
1 POWER Turns the power on or off
2COLOR MODE Changes the color mode
3 OFF TIMER Sets the time until the monitor power-off
4 EcoView Index Displays or hides the indicator (green) that indicates
the power saving level
5VOLUME Adjusts the volume
6 MUTE Mutes sound temporarily
7 GAME Use when displaying the game images
SIZE Changes the screen size
THRU Changes to “Thru Mode”
(available only for VIDEO input or HDMI (video signal)
input)
8 SCREEN SIZE Changes the screen size
9INPUT SELECT Switches the input signal
PC PC1 / PC2
VIDEO VIDEO1 / VIDEO2
HDMI HDMI1 / HDMI2
10 EXIT Exits the menu in menu operation
11 RETURN Returns to the previous menu in menu operation
12 Control buttons
(pqt u)Used to select the setting or adjustment items, or to increase or decrease the adjustment values on each
menu
13 ENTER Displays the Setting menu, xes the setting or
adjustment items on each menu, and saves the
setting or adjustment results
14 MENU Displays/Exits the Setting menu
15 Link Menu
(HDMI CEC) Displays/Exits the Link Menu
16 Color Buttons Use when controlling external devices using the HDMI
CEC function
17 PinP Use for PinP display mode
ON/OFF Turns PinP display on or off
FULL Displays the Sub-Window in full screen
SOUND Changes the output sound
POSITION Changes the Sub-Window position
NOTE
• Thru Mode minimizes the delay of
displaying image.
NOTE
• Thru Mode minimizes the delay of
displaying image.

11
Chapter 1 Features and Overview
1-3 Functions and Basic Operation
Functions
Attention
•Settable functions differ depending on the input signal.(Refer to “Setting menu list” on page 48.)
Setting menu
(As for the menu operation, refer to page 13.)
Color Adjustment (Simple Adjustment)
●To select the color mode [Color Mode]
……………………………………………… see page 26
Color Adjustment (Advanced Adjustment)
● [Brightness / Black Level / Contrast / Saturation / Hue /
Temperature / Auto EcoView / OutlineEnhancer /
ContrastEnhancer / RGB Balance / Gain / Gamma /
Noise Filter / I/P Conversion] can be set for each mode.
(Settable functions vary with the display mode.)
……………………………………………… see page 27
Sound Adjustment
●To adjust the left and right volume balance [Balance]
……………………………………………… see page 33
●To adjust Treble and Bass [Treble] / [Bass]
……………………………………………… see page 33
●To enable/disable Bass Boost [Bass Boost]
……………………………………………… see page 33
●To enable/disable Stereo Expander [Stereo Expander]
……………………………………………… see page 33
Power Saving Setting
●To enable/disable automatic power off setting when no
input signal is detected [No Signal Off] … see page 35
●To enable/disable the automatic power off setting when no
operation is done [No Operation Off] …… see page 35
●To enable/disable the Power Saving mode
[Power Saving (PC)] ……………………… see page 36
●Displaying the level of power saving by EcoView Index
[EcoView Index] …………………………… see page 37
PowerManager™
No Signal Off
No Operation Off
Power Saving(PC)
Reset
EcoView Index
Return
[ENTER] : Enter
: Select [EXIT]: Exit
[ ]Enable
[ ]Enable
[ ]Disable
[ ]On
Sound(xxxx)
Balance
Treble
Bass
Reset
Stereo Expander
Bass Boost
Return
[ENTER] : Enter
: Select [EXIT]: Exit
[ ]0
[ ]0
[ ]0
[ ]Disable
[ ]Disable
Color
Color Mode
Brightness
Black Level
Hue
Saturation
Contrast
Temperature
Return
[ENTER] : Enter
: Select [EXIT]: Exit
Reset
Advanced Settings
[ ]Standard
[ ]Custom(xxxx)
[ ]50
[ ]50
[ ]0
[ ]0
[ ]6500K
ScreenManager
®
Color
Sound
PowerManager™
Monitor Settings
Information
[ENTER]: Enter
: Select

12 Chapter 1 Features and Overview
Monitor Settings
Language
USB Selection
Power Indicator
HDMI CEC Setting
Real Image
Sub-Window Lucent
Advanced Settings(xxxx)
Return
[ENTER] : Enter
: Select [EXIT]: Exit
Reset
[ ]On
[ ]English
[ ]Auto
[ ]0
[ ]Disable
● Locking Buttons …………………………………… ...................................................see page 38
●Setting EIZO logo display ON/OFF …………… ...................................................see page 39
●Resetting the Setting of the Displayed Menu to the Default [Reset].........................see page 39
Attention
•Settable functions differ depending on the input signal.(Refer to “Setting menu list” on page 48.)
Setting menu
(As for the menu operation, refer to page 13.)
ScreenManager
®
Color
Sound
PowerManager™
Monitor Settings
Information
[ENTER]: Enter
: Select
FORIS FX2431 S/N:********
Usage Time ******** H
Input Signal
(Digital)
**** × ****
fH: ***.*kHz
fD: ***.*MHz
fV: ***.* Hz
Information(xxxx)
Return
[ENTER]: Return
Information Checking
●Displaying Monitor Information [Information]
………………………………………see page 38
Monitor Settings
● Setting Language [Language] …………… see page 39
●USB Selection Setting [USB Selection] … see page 14
●Setting Power Indicator ON/OFF [Power Indicator]
……………………………………………… see page 38
●To set the translucent level for Sub-Window
[Sub-Window Lucent] ……………………… see page 19
●To enable/disable Real Image [Real Image]
……………………………………………… see page 15
●To set HDMI CEC [HDMI CEC Setting] … see page 17
Advanced Settings for Each Input
■PCInput
●To adjust flickering, screen position, and screen size
automatically [Auto Screen Adjust] ……… see page 22
●To adjust color gradation automatically
[Auto Range Adjust]………………………… see page 24
●To eliminate vertical bars [Clock] ………… see page 23
●To remove flickering or blurring [Phase] … see page 24
●To correct screen position [Position]……… see page 24
●To set when a noise appears on the screen
[Signal Filter]………………………………… see page 42
●To adjust the sound level [Sound Level] … see page 34
■VIDEOInput
●To enable/disable Auto Screen Size function
[Auto Screen Size] ………………………… see page 20
●To set the screen ratio [Screen Ratio] …… see page 21
●To remove color blurring, color stripe, and point-like noise
[3D-Y/C]……………………………………… see page 43
●To set the color system when the screen is displayed
incorrectly [Color System] ………………… see page 43
●To remove flickering or blurring [Phase] … see page 25
●To adjust the sound level [Sound Level] … see page 34
■HDMIInput
●Input Format Setting [Input Format] ……… see page 37
●To enable/disable Auto Screen Size function
[Auto Screen Size] ………………………… see page 20
●To set the screen ratio [Screen Ratio] …… see page 21
●To set the color space when the image color is displayed
incorrectly [Color Space]…………………… see page 44
●Audio Input Connector Setting [Sound Input Jack]
……………………………………………… see page 38
●To adjust the sound level [Sound Level] … see page 34

13
Chapter 1 Features and Overview
Basic operation of the Setting menu
[Displaying the Setting menu and selecting function]
■DisplayingtheSettingmenu
• The remote control: Press .
• The buttons on the monitor: Press .
■DisplayingtheItem Selecting menu, Setting/Adjustment menu
• The remote control:
Select a function with control buttons (p/ q/ t/ u) and press .
• The buttons on the monitor:
Select a function with control buttons (p/ q/ t/ u) and press .
■Selecting/Adjustment menu items
Select or adjust an item with control buttons (p/ q/ t/ u).
■Decidingtheitem
• The remote control: Press .
• The buttons on the monitor: Press .
[Exit the menu]
• The remote control: Press .
• The buttons on the monitor: Press twice continuously.
NOTE
• To go back to the previous menu, press .
Functions (Continued)
The following operations are available with remote control.
Input Signal Switching
●To switch the input signal according to the device that
you want to display <PC / VIDEO / HDMI>
………………………………………see page 14
Volume Adjusting
● To turn the volume up/down <VOLUME (+ / -)>
………………………………………see page 14
●To mute the sound temporarily <MUTE>
………………………………………see page 14
Game Image Display Setting
●To set on/off for Thru Mode (minimizes the delay of
displaying image) <THRU> ………see page 15
●To change game screen size <SIZE>
………………………………………see page 15
External Device Controlling
(HDMI CEC Function)
●To control external devices with the remote control of
the monitor <Link Menu> …………see page 16
PinP (Picture in Picture) Display
●To turn PinP display on or off <ON/OFF>
………………………………………see page 19
●To change the output sound <SOUND>
………………………………………see page 19
● To display the Sub-Window in full screen <FULL>
………………………………………see page 19
●To change the Sub-Window position
<POSITION> ………………………see page 19
Screen Size Changing
●To change the screen size manually <SIZE>
………………………………………see page 20
Color Mode Changing
●To select the color mode <COLOR MODE>
………………………………………see page 26
EcoView Index Displaying
●To display/hide the indicator (green) that indicates the
power saving level <EcoView Index>
………………………………………see page 37
Off Timer Setting
●To set the time until the monitor is automatically turned
off <OFF TIMER> …………………see page 37
ScreenManager
®
Color
Sound
PowerManager™
Monitor Settings
Information
[ENTER]: Enter
: Select
Color
Color Mode
Brightness
Black Level
Hue
Saturation
Contrast
Temperature
Return
[ENTER] : Enter
: Select [EXIT]: Exit
Reset
Advanced Settings
[ ]Standard
[ ]Custom(xxxx)
[ ]50
[ ]50
[ ]0
[ ]0
[ ]6500K
Setting menu
Item Selecting menu
Color Mode
Custom(xxxx)
Setting/Adjustment menu

14 Chapter 2 Operation
Chapter 2 Operation
2-1 Input Signal Switching
This function allows you to switch the input signal according to the device that
you want to display.
(1) Press , or on the remote control.
Each time you press the button, the input signal switches as below.
- : PC1 → PC2
- : VIDEO1 → VIDEO2
- : HDMI1 → HDMI2
■USB Selection Setting [USB Selection]
When connecting the USB devices to the downstream port of the monitor, you
can specify the PC on which the USB devices work.
Settings Using status
Auto The PC on which the USB devices work switches
automatically according to input signal switching
(between PC 1 and PC 2).
PC1 The USB devices work on the PC connected to
“PC1” input.
PC2 The USB devices work on the PC connected to
“PC2” input.
(1) Choose [Monitor Settings] in the Setting menu and press .
(2) Choose [USB Selection] in the [Monitor Settings] menu and press .
The [USB Selection] setting menu appears.
(3) Select “Auto”, “PC1” or “PC2” with tor u, and then press .
The setting is completed.
2-2 Volume Adjustment
● To turn the volume up/down
This function allows you to adjust volume of the speakers and headphones up
or down.
Adjustable range: 0 to 50
(1) Press or on the remote control.
● To mute the sound temporarily
(1) Press on the remote control.
Mute sound temporarily.
By pressing the button again or pressing , the sound comes back.
NOTE
• Operation with the buttons on the
monitor
- Press until the input selection
menu appears, and then switch the
input signal with tor u.
NOTE
• Operation with the buttons on the
monitor
- Press until the input selection
menu appears, and then switch the
input signal with tor u.
Attention
• “Auto” functions only for the PC
connected to PC input.
• To use the USB device on the PC
connected to HDMI input, connect
the PC to the upstream port (“PC 1”
or “PC 2”) of the monitor with the
USB cable, and then select the port to
which the USB cable is connected in
[USB Selection].
• Please note the following when
changing the setting.
- When connecting a memory device
such as a USB memory to the
monitor, the data may be lost and
damaged. Be sure to change the
USB setting after removing the
memory device.
Attention
• “Auto” functions only for the PC
connected to PC input.
• To use the USB device on the PC
connected to HDMI input, connect
the PC to the upstream port (“PC 1”
or “PC 2”) of the monitor with the
USB cable, and then select the port to
which the USB cable is connected in
[USB Selection].
• Please note the following when
changing the setting.
- When connecting a memory device
such as a USB memory to the
monitor, the data may be lost and
damaged. Be sure to change the
USB setting after removing the
memory device.
NOTE
• Operation with the buttons on the
monitor
- Press until the volume menu
appears, and then adjust the volume
with tor u.
NOTE
• Operation with the buttons on the
monitor
- Press until the volume menu
appears, and then adjust the volume
with tor u.
NOTE
• The mute setting can also be released
by pressing uon the monitor.
NOTE
• The mute setting can also be released
by pressing uon the monitor.

15
Chapter 2 Operation
2-3 Game Image Display
● To set on / off for Thru Mode
This function allows you to set Thru Mode (minimizes the delay of displaying
image) to display game images.
(1) Press on the remote control.
Each time you press , Thru Mode turns on or off.
● To change game screen size
This function allows you to change the screen size suitable for game.
■PC Input / HDMI (PC Signal) Input
Settings Status
Normal Displays images with the specied resolution.
2 * Normal Displays an image with the doubled aspect ratio
of “Normal” setting.
■VIDEO Input / HDMI (Video Signal) Input
Settings Status
Portable (VIDEO Input only) Select this when displaying the images of the
PlayStation Portable.
Real Displays an image with the resolution of the input
signal.
Aspect 4:3 Displays an image in 4 : 3 size based on the
vertical resolution of the input signal.
Aspect 16:9 Displays an image in 16 : 9 size based on the
vertical resolution of the input signal.
2 * Real Displays an image with the doubled aspect ratio
of “Real”.
2 * Aspect 4:3 Displays an image with the doubled aspect ratio
of “Aspect 4:3”.
2 * Aspect 16:9 Displays an image with the doubled aspect ratio
of “Aspect 16:9”.
(1) Press on the remote control.
Each time you press , the size changes.
● To enable/disable Real Image [Real Image]
This function allows you to choose whether the game images are displayed
without dot blurring.
“Enable” “Disable”
(1) Choose [Monitor Settings] in the Setting menu and press .
(2) Choose [Real Image] in the [Monitor Settings] menu and press .
The [Real Image] setting menu appears.
(3) Select “Enable” or “Disable” with tor u, and then press .
The setting is completed.
Attention
• Thru Mode is available only for
VIDEO input or HDMI (video signal)
input.
• When the signal of 1080p @ 24 Hz
/ 25 Hz / 30 Hz is input from the
gaming device connected to HDMI
input, “Thru Mode” is not available.
In “Thru Mode”, if the signal of
1080p @ 24 Hz / 25 Hz / 30 Hz is
input, the setting returns to the former
setting automatically during the signal
input.
Attention
• Thru Mode is available only for
VIDEO input or HDMI (video signal)
input.
• When the signal of 1080p @ 24 Hz
/ 25 Hz / 30 Hz is input from the
gaming device connected to HDMI
input, “Thru Mode” is not available.
In “Thru Mode”, if the signal of
1080p @ 24 Hz / 25 Hz / 30 Hz is
input, the setting returns to the former
setting automatically during the signal
input.
Attention
• When “2 * Normal” is selected and
the resolution of the input signal
exceeds 960 x 600, the screen is
displayed in “Normal”.
Attention
• When “2 * Normal” is selected and
the resolution of the input signal
exceeds 960 x 600, the screen is
displayed in “Normal”.
Attention
• When the input signal is 1080i, 720p
or 1080p, the screen size is xed to
“Real”, so that the setting could not
be changed.
• If the horizontal resolution exceeds
1920 when “2 * Aspect 16:9” is
selected, the left and right parts of the
image slightly cut off.
Attention
• When the input signal is 1080i, 720p
or 1080p, the screen size is xed to
“Real”, so that the setting could not
be changed.
• If the horizontal resolution exceeds
1920 when “2 * Aspect 16:9” is
selected, the left and right parts of the
image slightly cut off.
Attention
• [Real Image] is available only when
the screen size is set for game.
Attention
• [Real Image] is available only when
the screen size is set for game.

16 Chapter 2 Operation
2-4 External Device Controlling
(HDMI CEC Function)
● HDMI CEC Function
This monitor supports HDMI CEC (Consumer Electronics Control).
The interactive control becomes possible by connecting the external device
applicable to HDMI CEC to the monitor with the HDMI cable.
When using the HDMI CEC function, HDMI CEC setting (page 17) is required.
■Power On Link
When turning on or playing the external device, the monitor is automatically
turned on and the signal of the external device is input.
Recorder / Player
(HDMI CEC compatible devices)
Monitor
Power on,
play, etc.
Power on
Input signal
change
■Power Off Link
When turning off the monitor, the external devices are also turned off.
Power off Power off
Monitor
Recorder / Player
(HDMI CEC compatible devices)
■Play operation of external devices
The external device can be operated (play and stop, forward and reverse) with
the remote control of the monitor.
Play / Stop,
Forward / Reverse
(Link Menu)
Play
Forward Reverse
Stop
HDMI1 Recorder
Change Mode
Search
Stop
Search
Play
Device List
MENU
Close Link Menu
EXIT
Recorder / Player
(HDMI CEC compatible devices)
Monitor
■Menu operation of external devices
The menu of the external device can be operated with the remote control of the
monitor.
Control menu,
power on/off
(Link Menu)
Power on/off
Setting is changed
by menu operation
Recorder / Player
(HDMI CEC compatible devices)
Monitor
HDMI1 Recorder
Change Mode
Power
MENU
EXIT
Exit
Menu A Menu B
Device List
Close Link Menu
Attention
• Using the HDMI CEC function,
this monitor can control only those
external devices such as recorders and
players applicable to HDMI CEC.
However, this function does not work
correctly with some devices.
The HDMI CEC function does not
work when the device is connected
through the AV amplier or HDMI
selector.
• The setting of the connected device
needs to be changed when adding the
devices to be connected or changing
the connected input signal. Display
the Link Menu and select [Search
Devices] in [Device List] with the
connected device powered on. (See
page 17)
(While the “Please wait a few
minutes.” message is displayed, do
not turn off the monitor and connected
device.)
Attention
• Using the HDMI CEC function,
this monitor can control only those
external devices such as recorders and
players applicable to HDMI CEC.
However, this function does not work
correctly with some devices.
The HDMI CEC function does not
work when the device is connected
through the AV amplier or HDMI
selector.
• The setting of the connected device
needs to be changed when adding the
devices to be connected or changing
the connected input signal. Display
the Link Menu and select [Search
Devices] in [Device List] with the
connected device powered on. (See
page 17)
(While the “Please wait a few
minutes.” message is displayed, do
not turn off the monitor and connected
device.)
NOTE
• Power On Link can work by
controlling from all external devices
that are connected to the monitor.
• Power Off Link can work on all
external devices that are connected to
the monitor.
NOTE
• Power On Link can work by
controlling from all external devices
that are connected to the monitor.
• Power Off Link can work on all
external devices that are connected to
the monitor.
NOTE
• The play operation and menu
operation work only on the target
external devices.
However, this function does not work
correctly with some devices.
• For the procedure of the play
operation and menu operation, refer
to page 17.
NOTE
• The play operation and menu
operation work only on the target
external devices.
However, this function does not work
correctly with some devices.
• For the procedure of the play
operation and menu operation, refer
to page 17.

17
Chapter 2 Operation
● To set HDMI CEC [HDMI CEC Setting]
(1) Conrm that the HDMI CEC setting of the external device is enabled.
For details on the setting, refer to the manual of the external device.
(2) Choose [Monitor Settings] in the Setting menu and press .
(3) Choose [HDMI CEC Setting] in the [Monitor Settings] menu and press
.
The [HDMI CEC Setting] menu appears.
(4) Set each item.
1. Choose the setting item with por q and press .
The setting menu of the selected item appears.
2. Select the setting with tor u, and then press .
The setting is completed.
● To perform play operation and menu operation
Operate the Link Menu.
(1) Press on the remote control.
The Link Menu appears.
HDMI1 Recorder
Change Mode
Search
Stop
Search
Play
Device List
MENU
Close Link Menu
EXIT
Link Menu
The input signal and the
name of currently
controllable device is
displayed.
(When changing the
controlled device, see
below.)
Appears when the external device does not
correspond to the control from the monitor.
Indicates the power status
of the connected external
device.
Green : Power on
Gray : Power off
Orange: is powering up /
is powering off
■When switching controlled device
(1) Press .
The list of controllable devices appears.
“√” mark is displayed next to the currently selected device.
Device List
Return
Search Devices
HDMI2 Player
: Select [ENTER] : Enter
HDMI1 Recorder
✓
(2) Select the device to be controlled with por q, and then press .
The setting is completed.
■How to use
The mode of the Link Menu can be changed by pressing [Change Mode]. The
available operation differ according to modes.
- Controlling the play of external devices (Play and stop, forward and reverse)
- Controlling the menu of external devices (control menu, power on/off)
Press to switch the mode, and then press the appropriate buttons to the
operation of each mode on the remote control. (See page 18)
NOTE
• When not using the HDMI CEC
function, Power On Link, or Power
Off Link, set “Disable” to each of
them.
• While [HDMI CEC] is at “Disable”,
[Power On Link] and [Power Off
Link] cannot be selected.
NOTE
• When not using the HDMI CEC
function, Power On Link, or Power
Off Link, set “Disable” to each of
them.
• While [HDMI CEC] is at “Disable”,
[Power On Link] and [Power Off
Link] cannot be selected.
Attention
• If the device list is displayed with
the message “There are no operable
devices.” when pressing , conrm
that the device is connected correctly
and the power is turned on, and then
select [Search Devices] and press
.
• Press to close the Link Menu.
Attention
• If the device list is displayed with
the message “There are no operable
devices.” when pressing , conrm
that the device is connected correctly
and the power is turned on, and then
select [Search Devices] and press
.
• Press to close the Link Menu.
NOTE
• If the target device is not displayed in
the device list, conrm that the device
is connected correctly and the power
is turned on, and then select [Search
Devices] and press .
• The controlled device can also be
changed by switching the input signal.
NOTE
• If the target device is not displayed in
the device list, conrm that the device
is connected correctly and the power
is turned on, and then select [Search
Devices] and press .
• The controlled device can also be
changed by switching the input signal.

18 Chapter 2 Operation
Controlling the play of external devices
Press: [Play]
Press: [Search]
(reverse)
Press: [Search]
(forward)
Press: [Stop]
HDMI1 Recorder
Change Mode
Search
Stop
Search
Play
Device List
MENU
Close Link Menu
EXIT
: [Change Mode]
Press

Pressing switches the mode.
Controlling the menu of external devices
HDMI1 Recorder
Change Mode
Power
MENU
EXIT
Exit
Menu A Menu B
Device List
Close Link Menu
*1: Use this when the menu of external device cannot be
closed by manipulating the menu.
Press: [Power]
(Powers on/off the external device)
Press: [Menu A]
(Displays the menu
of external device)
Press: [Exit]*1
(Closes the menu of external device)
: [Change Mode]
Press
Press: [Menu B]
(Displays the menu
of external device)
Attention
• The menu displayed with pressing tor udepends on the external device.
• When the menu of the external device appears, press to close the Link Menu.
(The menu of the external device cannot be controlled without closing of the Link Menu.)
• While the menu of the external device is displayed, the buttons on the remote
control shown in right are available. (The works of each button depend on the
menu.)

  

19
Chapter 2 Operation
2-5 PinP (Picture in Picture) Display
● To turn PinP display on or off
When the PC (PC input) and AV device (VIDEO input / HDMI input) are
connected to the monitor, both images can be displayed in Main Window and
Sub-Window simultaneously.
PC
(PC input signal screen)
AV device
(VIDEO input/HDMI input
signal screen)
Sub-Window
(VIDEO input/HDMI
input signal screen)
Main Window
(PC input signal screen)
(1) Press on the remote control.
Each time you press , the setting switches between ON and OFF.
● To change the output sound
This function allows you to change the output sound in PinP display mode.
(Main Window and Sub-Window)
(1) Press on the remote control.
Each time you press , the setting of sound changes.
● To change the Main Window and Sub-Window input signal
This function allows you to change the input signal of Main Window and
Sub-Window.
■Main Window
(1) Press on the remote control.
■Sub-Window
(1) Press or on the remote control.
● To change the Sub-Window position
This function allows you to change the Sub-Window position. (Upper Right,
Lower Right, Lower Left and Upper Left)
(1) Press on the remote control.
Each time you press , the position changes.
● To set the translucent level for Sub-Window
[Sub-Window Lucent]
This function allows you to display the Sub-Window translucently and see the
Main Window through it.
Adjustable range: 0, 1, 2, 3
(1) Choose [Monitor Settings] in the Setting menu and press .
(2) Choose [Sub-Window Lucent] in the [Monitor Settings] menu and press
.
The [Sub-Window Lucent] setting menu appears.
(3) Select the level with tor u, and then press .
The setting is completed.
Attention
• The Main Window is not used for
VIDEO input/HDMI input signal
display and the Sub-Window is not
used for PC input signal display.
The image of the PC connected to
HDMI input is displayed on Sub-
Window.
Attention
• The Main Window is not used for
VIDEO input/HDMI input signal
display and the Sub-Window is not
used for PC input signal display.
The image of the PC connected to
HDMI input is displayed on Sub-
Window.
NOTE
• In PinP display mode, by pressing
Sub-Window size can be
changed.
However, when the signal of 1080i,
720p or 1080p is displayed in the
Sub-Window, the size is xed to
“16:9”.
When the PC signal from HDMI input
is displayed in the Sub-Window, the
size cannot be changed with .
• The mode setting of PC input signal
is applied to the color mode in PinP
display mode.
NOTE
• In PinP display mode, by pressing
Sub-Window size can be
changed.
However, when the signal of 1080i,
720p or 1080p is displayed in the
Sub-Window, the size is xed to
“16:9”.
When the PC signal from HDMI input
is displayed in the Sub-Window, the
size cannot be changed with .
• The mode setting of PC input signal
is applied to the color mode in PinP
display mode.
NOTE
• In PinP display mode, the Sub-
Window can be displayed in full
screen (single display) by pressing
on the remote control.
Press the button again to return to
PinP display mode.
NOTE
• In PinP display mode, the Sub-
Window can be displayed in full
screen (single display) by pressing
on the remote control.
Press the button again to return to
PinP display mode.

20 Chapter 2 Operation
2-6 Screen Size Changing
● To enable/disable auto changing [Auto Screen Size]
The auto changing of the screen size can be set according to the aspect
information of the input signal from AV device.
(1) Choose [Monitor Settings] in the Setting menu and press .
(2) Choose [Advanced Settings] in the [Monitor Settings] menu and press .
(3) Choose [Auto Screen Size] in the [Advanced Settings] menu and press .
The [Auto Screen Size] setting menu appears.
(4) Select “Enable” or “Disable” with tor u, and then press .
The setting is completed.
● To change the screen size manually
■PC Input / HDMI (PC Signal) Input
Settings Status
Full Screen Displays an image in full screen. Images are
distorted in some cases because the vertical rate
is not equal to the horizontal rate.
Enlarged Displays an image in full screen. In some cases,
a blank horizontal or vertical border appears to
equalize the vertical rate and the horizontal rate.
(Ex.: 1280 × 1024 display)
Full Screen Enlarged
(Default setting)
(1920 × 1200) (1500 × 1200)
■VIDEO Input / HDMI (Video Signal) Input
Settings Status Input Signal gScreen Display
(Aspect ratio)
4:3 Displays the image in 4 : 3
size. The borders are shown
on both sides of the screen.
16 : 9 sized images from the
input signal are compressed
horizontally and spread
vertically.
（4：3）
4:3 Zoom1 Displays Letterbox of 16 : 9
in full screen. Except for
Letterbox, the upper and
lower parts of the projected
image are cut.
（16：9
Letterbox ）
4:3 Zoom2 Displays Letterbox of 14 : 9
in the center of the screen
(15.5 : 10 size). The black
borders are shown on both
sides of the screen. Except
for Letterbox, the upper and
lower parts of the projected
image are cut.
（14：9
Letterbox ）
16:9 Displays the whole image
in 16:9 size. Black borders
appear on the top and bottom
side of the image. The image
of 4 : 3 is slightly spread
horizontally.
（16：9）
Attention
• [Auto Screen Size] is available only
for VIDEO input or HDMI (video
signal) input.
Attention
• [Auto Screen Size] is available only
for VIDEO input or HDMI (video
signal) input.
NOTE
• If you do not want to change the
Screen size automatically, set the
[Auto Screen Size] to “Disable”.
• After changing the screen size
automatically, it can be changed
manually.
NOTE
• If you do not want to change the
Screen size automatically, set the
[Auto Screen Size] to “Disable”.
• After changing the screen size
automatically, it can be changed
manually.
NOTE
• When displaying the images of the
gaming device, use the changing
of the game (Refer to “To change
game screen size” on page 15).
• If you want to display the image with
the default resolution, select “Normal”
in of the game.
NOTE
• When displaying the images of the
gaming device, use the changing
of the game (Refer to “To change
game screen size” on page 15).
• If you want to display the image with
the default resolution, select “Normal”
in of the game.
Attention
• When the input signal is 1080i, 720p
or 1080p, only “16:9” and “16:9
Zoom” are available.
NOTE
• The screen ratio can be selected
independently of the screen size (see
page 21).
Attention
• When the input signal is 1080i, 720p
or 1080p, only “16:9” and “16:9
Zoom” are available.
NOTE
• The screen ratio can be selected
independently of the screen size (see
page 21).